I bought my printer to Bahrain, he does not accept the cartridges UK

Similar Questions

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• 6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

  Hello

  I need advice to fix this... My printer (HP Officejet 6210 all-in-One Printer) that I bought in Europe does not accept the cartridges sold US. The printer identifies the cartridge 94 as incompatible. On the site of HP 94 cartridge is listed as being compatible with this printer (the original cartridge is 338). It seems that I need a new printer? It still works perfectly. Should I try other types of cartridges?

  Thank you.

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

• My computer does not accept the print command.

  My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

  Sherimcfalls,

  1. what operating system is installed on the computer?
  2. the problem occurs with any particular application?

  Method 1
  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  Try to set the default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

• I just bought 6 of Lightroom. It does not recognize the RX10II sony raw files.

  I just bought 6 of Lightroom. It does not recognize the RX10II sony raw files.  (RAW ARW file type).   I checked the web site of Adobe, it says version 6.1.1 LR. reads the ARW files.    6.1.1 seems to be only available in CC.  Is this correct?  My purchase was a waste of money?

  Advice please.

  Lightroom 6.1.1 isn't Lightroom CC. Lightroom 6.1.1 is a stand-alone version and not required Lightroom CC. This is a free update to the version you have now. Download the last 6.3 maintenance of Lightroom Lightroom

• Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I bought a Nikon D7100. Lightroom does not recognize the Nef Raw files what I am doing wrong?

  I bought a Nikon D7100. Lightroom does not recognize the Nef Raw files what I am doing wrong?

  Thank you for your response. I solved the problem by simply importing the

  images using windows rather than the Nikon transfer.

  In a message dated 09/03/2015 20:00:49 Hawaiian Standard Time,

  [email protected] wrote:

  I bought a Nikon D7100. Lightroom does not recognize Nef Raw files

  what I am doing wrong?

  created by BKKDon (https://forums.adobe.com/people/BKKDon) in Photoshop

  Lightroom - see the discussion complete

  (https://forums.adobe.com/message/7270711#7270711)

• Hi - I recently bought a new iMac. I have a design Premium cs5 recorded which is an upgrade - I have no disk for cs4 but the qualifying serial number for it. I installed cs5 via download on my iMac, but it does not accept the ser

  Hi - I recently bought a new iMac. I have a design Premium cs5 recorded which is an upgrade - I have no disk for cs4 but the qualifying serial number for it. I installed cs5 via download on my iMac, but it does not accept the serial number. If anyone can help. Anyone who thinks that Adobe will lose a lot of customers with no chat or calling users cs5 support?

  You can support the serial number and activation support.

  Mylenium

• Re: Failed on nine L510 Vista admin password - does not accept the admin pass

  Hi all

  Completely baffled by this one so would appreciate any advice.

  I just bought a new Satellite L510 with vista hard disk installation.

  I went through the installation process long and eventually got to the point where I could configure my admin account and the name of my computer.

  I chose the name of my admin account and typed in the password and confirm the password and named my computer.

  Now when I get to the initial Vista logon screen, it does not accept the password I am entered (and confirmed).

  This can be a problem with caps lock, as the password was all numbers.

  (the password was all numbers and five numbers)

  It, however, gives the correct indication for the password that I entered. It does not accept the password.

  I would be happy even just redo the installation process, but I have no idea how to do this, because I can't even a quick command-line anywhere.

  Help, please!

  It's strange. You can log on using a different user name?

  In any case to run recovery, you either:

  * Press and hold zero during the power upward
  * Press F8 before Windows starts to enter the Windows Start Menu, then run recovery of the option "repair your computer". http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Money Plus Deluxe does not accept the product key

  I bought a new computer - I have Money Plus Deluxe on my old computer.  I installed the software on my new computer, but it does not accept the product key.  How to operate?

  Moved from the community involvement Center

  Original title: Money Plus Deluxe

  Hello

  Ask in the silver Forum

  https://social.Microsoft.com/forums/en-us/home?Forum=money

  Don

• I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

  I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

  What "MS"?

  Microsoft is a company, not a product.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Reinstall Windows 7 does not accept the product key

  Just bought a new PC to replace my crashed. Install Windows 7 from the DVD I got for my old PC. It does not accept the product key. Think it's because it was a copy of Windows 7 upgrade. What can I do about this that I can't downgrade to Windows XP. I have the original and the product key for Windows XP disks.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 8 does not accept the product key

  About 3 years ago I bought Windows 8 Pro (64-bit). In the meantime, I reinstalled the system a good several times because of some strange accidents (see my other question). Now, I tried to reinstall it again, until Windows 10 comes out, but activation does not accept the key. I read on other forums that this is probably beyond the limit of activations.

  Is there a way to reset the key or am I forced to buy a second?

  Thank you

  Mario

  Hello Mario,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes to the Surface before the show?
  2. do you receive a code or a message when you say, 'activation does not accept the key?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because corrupt Windows activation files or parameters.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  To activate the phone and check.
  Refer to this article:
  Get help from Microsoft Windows activation
  https://support.Microsoft.com/en-us/KB/950929

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of nobody611 responded on 4 December 2012 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-activation-after-clean-install-does-not/01047349-516A-485f-b88d-68c1c9ac0e9c

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you