I can clone a drive using Disk Utility Version 15.0

Similar Questions

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Content transfer to the old drive again using disk utility?

  I just bought a new SSD and want to transfer all my HD content in a Mac Mini to it.

  The SSD vendor has advised using disk utility for drag-and - drop the old drive to the new, but until now I

  wasted summer. I formatted the new drive and resized the partition on the old drive to

  It is smaller than the new. When I try to run the utility, it seems to initialize and start the transfer, with

  at 2 p.m., provided the time to complete the process. However when I get back later nothing seems

  have been carried out.

  Anyone have any suggestions?

  No drag & drop won't do. Do this instead...

  12.x disk utility: create a disk image

  Also, you could use Time Machine, or software of cloning asSuperDuper! or Double Cloner

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• Use disk utility to erase hard drive, erase everything, it

  I just use disk utility to erase the hard drive of Windows base.  It has 6,2 GB of space.  The erase process takes only a few seconds.

  I read that it could take hours.  I suspect that he does not erase the hard drive.    I have several old PC drives and want to use disk utility to erase.

  How would I know if it works?

  Rolland

  I would just use disk utility to put those (journaled) in Mac

  If nothing has been left in the delete process - the format will take care of it

• You need 2 TB 2nd hdd on Pavilion hpe h8 - 1380t so I can clone main drive. Problems?

  I need to spend my second hdd to a 2 TB drive, so I can clone main drive.  Are there compatibility issues, that I need to know?

  It should not be. A 2 TB drive is an option on this model. If it will not be the main disk where the OS is installed, then the only real problem in that you should have to run is to find an additional SATA cable.

• I can't find "score" in disk utility.  I used it when I implemented the system.  Thank you.

  I don't find the Partition tab in disk utility.

  It is not a.

  Partitioning of a hard disk:

  http://www.Kenstone.NET/fcp_homepage/partitioning_tiger.html

  To resize or add/delete an existing partition without data loss, you need to use, for example, iPartition:

  http://www.Coriolis-systems.com/iPartition.php

  But first of all it is important that you first save all partitions on a separate volume, any loss of data.

• Creating image using disk utility

  Hi - I am trying to create an image file of and CD Audo to later burn multiple copies (I own the rights on this CD).

  The process I use is to load the CD in the drive SuperDrive, open disk utility and select the disk in the sidebar (curiously, the drive itself is not there, just the disk). Can I go to file = > new Image == > Audio CD Image. Select a destination, Format: unalterable, encryption: no) and click Save.

  He done much work slowly disk reading and writing of the file (Audio CD.dmg). However, if I try to open the file when it has finished, it said "no mountable file system" and if I burn it to a CD - r disc resulting almost blown my speakers with the sound. To check, I tried with a commercial CD as well - same result.

  I'm doing something wrong here. He doesn't know he used to work in previous versions of the utility.

  System: Mac Pro early 2008 OS X Superdrive Pioneer (original Apple) El Capitan 10.11.5.

  Hello

  There is a little powerful 3rd party app called 'Burn '. Older applications, it's works well in El Capitan as well. If you decide to download and install, you will need to go to preferences > Security and privacy to allow him permission to run for the first time. After that, he will not ask you again. It is simple and easy. Create .iso and burn. Create and burn data/audio CDs and copy CDs as well. There are a few 3rd party applications which are worthy of Mac, and this one is. The name of it, is once again, 'Burn '.

  Bravo!

• Accidentally lost all my files from external drive in disk utility

  Hi guys, I will try to be very clear since its my first time, ask a question here.

  Then, I opened the disk utility and attempted to create a partition on my external hard drive 1 TB Toshiba USB3.0 (I thought I might have a separate location of 100 GB). But instead, I end up getting the hard drive is blank and changed to OS X (HFS) in MS-DOS (FAT32) mode.

  So my question here, just delete all of my information? If so, how can I get it back? Or just create a partition and the other information are hidden (which would be like a miracle)?

  It is very important, I have to retrieve this information. I had close to 900 GB of professionals to the personal files. All my work, years of personal projects of my digital life is here.

  Help, please!

  This can be a possibility:

  http://www.CGSecurity.org/wiki/TestDisk

  I've never used it so I can't give you any recommendation.

  Ciao.

• Make the disk image using disk utility and the message "Apple_HFS: 0" is displayed

  I'm doing a disk image to try to work on that later. This is an image of a failed disk drive. Some areas can only be read, I know and the process takes a long time because of this, so I'm willing to be patient.

  I get messages in the disk utility window that says "Apple_HFS: 0" and "Creation of image xxxx.dmg.

  The disc has about 700 GB. I started it about 20 hours ago, and the blue bar is about 5% of the way, so not much happened.

  I fear that the message "Apple_HFS: 0" means that the disk image is not made. I am concerned about the part "0". I don't know what that means.

  I don't want to do it for days and days and find that there not to make a disc image all this time.

  I realize that the fact that the external drive is damaged (probably damage) means that this process will take longer than normal. I am willing to leave it for a week so that he can make a disk image. But not more than a week because then it is not worth my time.

  So my question is: does the message ' Apple_HFS: 0 "means something bad, or that the message normally during this procedure?

  Apart from this message and the message "Xxxx.dmg imaging", there is no other message.

  I think I'm making progress because the bar has moved since I started the process. For a long time I couldn't see a bar at all. And today, after spending the night, there is a small bar, as I said, about 5% complete. But it's very slow. It would take at least a week for the disk image to be made. I just want to know if the messages that I see are normal or not.

• Install Win8 on new HARD drive using disks of recovery on HP Envy M6

  Okay, so I have my hard drive crashed a few months. So, I ordered a set of HP recovery disks. I finally get around to retrieve Win8 on the new HARD drive. However, I follow these instructions and it does NOT work. I get to the Boot Manager and nothing is there - at all. So, I went back to the BIOS and disabled secure boot (just in case). Yet, nothing. After several hours, I dropped...

  Flash forward to today. I have enabled the legacy starts, moved DVD player y up in my order of start and stuck in a Win7 disc, I have here. One immediately recognizes the disc.

  I finally decided to try to install recovery using USB thought which may help. So, I had on my desktop and tried to rip an .iso of the disks. Both PowerISO and IMGBurn rise "IO error" partially through the period of inquiry.

  I'm starting think that the discs are bad... That would not explain why can't I see my optical drive in the Boot Manager however.

  Thoughts?

  It was records. I downloaded a copy of Win8 and it began immediately.

• Cannot start Bootcamp, after you have added the partition using disk utility

  My question is similar with repair Boot Camp after having created the new partition.

  recently I install the el capitan + windows 7 (using bootcamp), everything works fine after I add the third partition. (I anticipate the third partition will be use for dropbox, for mac and windows can sync-ing a dropbox for each folder).

  After I've done the third partition and restart the system, I want OPTION and found no windows.

  My mbp spec:

  MD101 2012 13 ",

  SAMSUNG 850 PRO SSD 256GO,.

  16 GB RAM,

  elcapitan OS x + windows 7 ultimate.

  Thank you

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• How can I download and use a trial version of acrobat

  How can I download a trial version of acrobat?

  Download a free trial version or buy Adobe products | Adobe Downloads

• I have little problem with my disk utility.

  Hello Sir/Madam...

  I have a little problem that I can't fix it.... so please can someone help me with this question, I can only explain with this image as an attachment, I thank those still and wish everyone the best chance.

  

  Make a backup, best 2 separated on 2 discs. Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error.  If this doesn't resolve the problem, try reformatting the drive using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.