The computer hangs when it
How stop the constant crashing from the windows of microsoft 01/04/09 download;
If left without a job for more than 10 minutes, the pc crashes.
Lic. ramirez,
Do you receive messages or stop error codes when you restart your computer?
Run the following restore tool:
- Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
- In the System Restore dialog box, click on choose a different restore point and then click Next.
- In the list of restore points, click a restore point created before you started having the problem, and then click Next.
- Click Finish.
The System Restore tool
If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
To restore the operating system to an earlier point in time, follow these steps:
The computer restarts and system files and settings are back to the State they were in when the restore point was created.
Rami
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
The computer hangs when you access network resources
I have this problem with a couple of computers at work. Here's the question:
Computer does not display the network icon in the system tray. When you try to access everything which concerns internet, nothing works. IE Page not found errors, etc. When I go to control panel > network connections, my computer freezes and I have to close the Task Manager Control Panel to continue. My computer will also freeze/hang up when I try to use another application that requires an internet connection.
Not help not to restart normally. The only way I could fix is by turning it off for a while, and turning back on later. But even if it does not work 50% of the time. Restarting over and over again does nothing; the computer still plays the same, no network icon / freezing when you access network resources. Once he decides to however works, the computer has internet/network connectivity and no problems until what it is off again.
I tried all the drivers out there for my network card and reformatted 3 times is not a virus/spyware. The I'm having a problem with the current computer is one day having no application other than Windows Update, Microsoft Office, Java, Flash and Adobe reader installed. They are all Dell computers, some are of the Vostro desktops, while some are older of the Inspiron. Questions computers are running Windows XP SP3.
Any help would be appreciated!
Hello
I suggest you to send your request in the below link that this forum is best suited for your question.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
I hope this helps!
-
The computer hangs when resumed from hibernation
Original title: my Dell Studio laptop has been extended in mood when arrested, on start windows hangs at «Windows resumes...» "how I reslove this issue?
My Dell laptop Studio 1537, Vista Home Premium, was closed down in sleep hibernation oe. When I try to restart windows crashes to the screen «Windows resumes...» ». How to reslove this problem?
Issue resloved by calling Smart Solutions from Dell 1-877-409-3272... Looks like you need start the computer, and then start pressing the F8 key until it brings Safe Mode, then let normal retart... It worked for me...
Hello
1. were you able to get the problem solved?
2 did you a recent software or changes to the material on the computer?
I suggest you to go through the steps mentioned in the link and the Coachman.
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
See also:
A Windows Vista-based computer stops responding when you resume the computer after hibernation
http://support.Microsoft.com/kb/928135
Hope this helps and provide us more information if you need more assistance.
-
Manufacturing recovery disks when the computer hangs when burning the DVD the first time
I bought a new desktop computer HP Desktop Core I-7. When I first connected, I started to burn the recovery disks. The problem is, the first burned disc and then the computer locked up before burning DVD 2 and 3 and had to be restarted. Now, I can't complete the game of recovery disks.
The good news is that I have used the first disc to access the recovery partition on the hard disk to rebuild everything, but now I did put a good recovery. Can I fix? Or do I have to hope that my drive will never block? Can I save the partition of subsequent restoration of a hard disk crash?
Memorex DVD + R media was bad. New media staring upward.
-
Computer do not normally sleep wake up and the computer hang when external USB devices are connected
Hello
I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:
1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.
It's the same thing when I tried to connect my iTouch 2nd generation.
This problem occurs sometimes, however, but I wonder if someone always has a solution to this?
2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.
I was wondering if you have solutions to this problem, as well.
Thank you.
Original title: new Windows 7 problem
Ok.. I'll try again...
The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.
I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.
It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.
The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...
-
The computer hangs when it is idling
I am currently running Windows 7 and the wheneve the computer is idle, it crashes. He did after minutes 20 minutes walking in slow motion now its crashing at much longer intervals. I called the computer manufacturing and it turns out that the power options are managed by Windows and Acer ePower management. The Acer program was crash Windows after 20 minutes of walking in slow motion, so I put options to never, and don't do anything. Now its taking a lot more time to the accident but its still crashing when it is idling.
Hello
Since the system is again doing the below and check with the methods given in the resolution of problems
Posted above. If those who do not help I would back up any data off the computer and return the
System back to the specifications of the factory (out of the box state) to see if the errors stop. Don't forget to contact
the seller and the manufacturer of the replacement system and/or warranty claim. Even if you are able to
the problems that should be documented in case there is further down in the problems of the road.
Also don't forget do you more they will claim that it is something that you did.=================================
You should have two main antivirus on the computer much less operating. Even the leftovers
a 2nd antivirus can cause strange problems. Please run the McAfee removal tool and I would like to uninstall
Norton 360 and run the Norton removal tool as well. Keep the MSE and the following recommendations.McAfee removal tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS100507Norton Removal Tool
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_USList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/=================================
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
"Core security check failed" and the computer hang when I plug the USB mouse
Hello
Whenever I plug my mouse into the USB port, my computer crashes and gives me the error "Kernel Security Check Failure". I tried to uninstall the mouse driver, but it does not work. The mouse works fine after restarting the computer. Thank you for your help.
Here is the link to the single minidump file, I managed to download (with other permissions issues):
https://SkyDrive.live.com/redir?RESID=AB9340451E9919AC%21161Let me know if there is anything you need. Thank you.
Hello
The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .
This bug check indicates that the kernel has detected a critical data structure corruption.
Error checking 139, {3, ffffd00022411350, ffffd000224112a8, 0}
Parameter 1 error checking is 3, indicating that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption. This type of bug control can be hard to track down and indicates an inconsistency introduced in a list to double bond (detected when an input list element is added or removed from the list).
Cannot load the image NMgamingms.sys, 0n2 error Win32
WARNING: Unable to verify timestamp for NMgamingms.sys
ERROR: Module load completed but symbols can be loaded for NMgamingms.sys
Probably caused by: NMgamingms.sys ( NMgamingms + 1cbb )^^ Primax and/or optical mouse USB Dell driver (CHECK OEM - system manufacturer). This is a highly problematic device driver in Windows or 8.1 simply due to the fact that it's drivers did not support for 8/8.1, so block you on connect. The only thing you can do is to check the website of the manufacturer of the mouse and check for a driver 8/8.1.
Kind regards
Patrick
-
the computer hangs when playing games
Some games I play keep shut off my computer. Someone knows why. I have windows vista home premium edition. Computer laptop dell inspiron 1525. Thank you
Make sure that the computer is not overheating. Also make sure you have the minimum requirements.
Do you get any error codes?
-
The computer hangs when connecting - if the workstation service is enabled.
Original title: the computer crashes with workstation active service.
I'm currently under Windows 7 Home Premium.
I struggled to the login screen where you choose your user name and it says welcome, but nothing happens. Otherwise, my cursor will come back, but I can't do and ctrl-alt-del does not work either.
I did safe mode, disabled services and isolated the problem to the workstation microsoft service. I understand that this workstation is essential for some components, such as connecting to a network drive, or a network printer.
Now I have to work with workstation service disabled, and it's very inconvenient for my work. Is there a way around it?
Thanks in advance.
Hello
Were there any changes or updates made on the computer before the show?
Method 1:
I suggest you run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
See also:
The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP
http://support.Microsoft.com/?kbid=890830#FAQ
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2:
I suggest to create a new user account and check if the problem persists.
Create a user profile.
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.
Reference:
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
See also:
Windows Vista and Windows 7 black screen on computer unlock
-
The computer hangs when you use the DVD player
Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.
I updated the DVD drive device driver; still crashes.
I have a Dell Optiplex GX 280
Windows XP SP3
DVD is a teac dvd + rw dv-w58e
-
The computer hangs when copying the data on the hard drive
* Problem *:
My computer freezes whenever I have transfer large amounts_ of the data on the disc from my computer. * It doesn't have this problem with my C drive *.
First detected this problem while I was transferring some data in LAN. This problem occurs even when I copy data to my C drive to the D drive.
Action taken:
-Performed a full scan of my computer, found some viruses, but the problem persists
-Do you have a check disk via Windows, as well as the TuneUp utility, no problem.Data sheet:
OS: Windows 7 Professional 32-bit
Processor: Intel Core 2 Duo t7200 @ 2.00GHz
RAM: 1 GB DDR2 - SDRAM
Hard drive: TOSHIBA MK1234GSX ATA Device(120GB)
No partitions: 2Hello
It of difficult to say what might be wrong here but if the question appears only using the second partition, then I recommend to check the State of the HARD drive.
I use a very good freeware tool called Drive Fitness Test.
Use google to download this software.It creates a boot disk that allows you to test the drive HARD and of course the two partitions.
If the error would be detected, then it means that the HARD drive failure could be the reason for this -
My browser has been hijacked by blinkiland. The computer hangs when connecting?
When Ipil on my password, get a dark blue glowingscreen. 64-bit Toshiba satellite s870 got in safe mode but it turns off the network connection, so can not sweep
Run most or all of the scanners listed. And once from time to time, start a new search.
More information can be found in the article troubleshooting Firefox problems caused by malware .
Get a good virus scanner and keep it up-to-date.
You can start here;http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
http://Windows.Microsoft.com/en-us/Windows/getting-started-with-security-essentials
-
My vista computer hangs when I right click on the screen and scroll again.
My vista computer hangs when I right click on the screen and scroll again. I guess it's a problem with the windows Explorer. I ran virus and malware scan and also led the sfc. I always get the same result. If anyone has faced this problem and knows the Fox please help
It could be a problem with the shell extensions.
Check out these links to see if they might be able to help:Make a right-click is slow or weird behavior caused by context menus managers
and
-
Computer hangs when you try to watch live TV through windows media centre__
Computer hangs when you try to watch live TV via windows media Center
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 3081
More information about the problem:
BCCode: a
BCP1: FFFFFA600C193FF8
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF8000233499E
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini112509-01.dmp
C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Hi Eddie Hunt
Welcome to the Microsoft Answers Forum!
I suggest you try this method and check if it is helpful
Method 1:
Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to run check and clean boot if you have the problem.
i. Click Start, type msconfig in the search box and press ENTER.
II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
III. in the general tab, click Selective startup.
IV. under Selective startup, clear the check box load startup items.
v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
VI. click OK.
VII. When you are prompted, click on restart.
VIII. after the computer starts, check if the problem is resolved.
If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
i. Click Start, type msconfig.exe in the start search box and press ENTER.
II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
III. on the general tab, click the Normal startup option and then click OK.
IV. When you are prompted to restart the computer, click on restart.
Method 2:
Install the latest codec package and check if that helps, link below will help you with the same:
Method 3:
Update the graphics card. Steps to update the graphics card:
i. click on start, type devmgmt.msc and then on enter.
II. develop the graphics card and right click on the sub element and click on update driver.
Link for reference: problems with watching TV on your computer
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Computer hangs when I click on view full map
My computer hangs when I click on view full map.
Hello
1. in using what application are you experiencing this problem?
2 you referring to maps available online?
3 are you aware of any changes made to the computer, before the show?
Please reply to us with more information, so that we can better help you.
Maybe you are looking for
-
In the last 6 months + / _ my Comcast email not send mail as the smpt said that the name and the password not recognized. I can delete them both and then re-enter on my iphone and ipad, imac and it works again. It happens now 2 or 3 times each week.
-
I want the programming palette appear everytime that I click right while in the block diagram
I want the programming palette appear everytime that I click right while in the block diagram. Right now I have to look at the dialog box Express, down arrow and then click programming. I want the programming to bring up the first. This should be
-
Impression of the HP printer Deskjet 3054 twisted
Hello I have a printer HP Deskjet 3054 A and I'm on Mac OS X Lion 10.7.3. Today, while I try to print a document, the pages printed on paper crooked. I tried to use snap to the HP utility application, as well as the option on the printer, however whe
-
Startup and display does not work well.
When I start Windows XP it takes about 4 minutes to the icons appears. They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and fi
-
I installed an update of HP driver audio, now does not.
downloadde and installed an HP audio driver update, do not think that it installed successfully but now my audio doesn't work. is it possible to do a system restore on win 8.1? HP Pavilion 500-214