I can turn my wrt54gs2 in WIFI access point?

Similar Questions

• HP Officejet pro 8100 cannot wifi access point?

  Yesterday, my HP Officejet pro 8100 arrived and I try to connect via wifi. I thought that it need access to infrastructure to print via wifi.

  When I turned on the printer I osserved that he create a stand-alone gateway with SSID: HP-Setup-7 a-Officejet Pro with IPv4 server address, etc...

  I was very happy and I printed a page with my smartphone samsung s4 directly connected printer access point (no wifi direct wifi except standard).

  Has been held today has changed, but I can't use printer with its own point of access, but only with an external wifi access point.

  Can someone help me, please? It could be a hardware problem?

  Thank you

  Luca

  P.S. to the webserver I checked 'connectivity point of access' (di accesso instradamento wireless in Italian Punto) is checked.

  Hello lucait

  You are right that the Hp Officejet PRo 8100 is a single function printer which does not directly optional wireless. You can always do what you want to do, but you will need a router to connect the printer to a network, and from there you can use the network routers or set up the feature ePrint for your portable devices.

  I hope this solves your post. Thanks again for the display on the HP Forums. It has been a pleasure. Have a great day!

• can I use a laptop to set up a wifi access point?

  When I first received a laptop of opportunity in last December, a colleague tech at my night school mentioned that I didn't have to buy a 803,11 access point device to plug my switch, but I rather use a WiFi card on my computer to create my own access point. I told him I have such a card and put a little out of my mind.

  However, I have someone outside to spend the night at my place, and he needs to check his e-mail. Unfortunately, it seems that the RJ-45 socket on his laptop is broken, I have tried several cables and impossible to get a connection, including the cable to connect the computer I'm using now.

  Is it possible that I can use ICS on XP Pro (preferred) or Vista 32 bit Home Premium (really want to use it, I have never set the boot loader after the upgrade to XP on a separate partition, especially because XP has worked so much better) to set up enough connectivity for him to connect to the mail server?

  Should I Windows 7 or Vista to do this? I know how to do the reverse quite easily (share Wi-Fi on the Ethernet port), but I don't know how to set up the SSID and others. I would assume same WEP or WPA2 (Yes, I know how it is easy to crack, but it's better that transmitting passwords in clear text because it discourages occasional interception) would too, so it will accept a connection open, unencrypted. I'll just close access once it does.

  How could I go to set it up? I'm not spending money on software that is not free for one night, one-shot deal. Kiss, I just need a connection of bare bones for him. If its Ethernet port was working, I would leave him to plug my switch, but since it's not I need to create a gateway using what material I have on hand, and the only device with any kind of ability 803.11 is my own laptop.

  I know it's possible, I don't know if this is something only Linux, or a solution that requires 3rd party software.

  Yes, you can use ICS.  See http://practicallynetworked.com/sharing/xp_ics/

  I forgot to include this--> http://www.home-network-help.com/ad-hoc-wireless-network.html

  You will need to configure security manually from the properties of maps dialog box wireless (on both computers) and IIRC, you can use WEP in ad-hoc XP networks.

  Go to the correct place
  Right click on the wireless adapter icon and select Properties
  Click the wireless networks tab
  Click Add to create a configuration
  in the 'Association' tab, set the SSID, network authentication 'Open' and WEP data encryption.
  It's been so long that I made that I remember exactly, but I think you can use only the 10 digit Hex key.

• Satellite P875 - 32L - is unable to reconnect to the last connected WIFI access point

  I have a problem to reconnect to the last connected WLAN provider, with my Satellite P875 32 L.
  WLAN is switched on and shows all the neighbors access points, but it fails to whoever I logged before the reboot, or before you go to the rescue of the list.

  I'm going in service options for WLAN, sometiimes up to 5 times, then it undermines meet usually.
  It's well annoying.

  I have had this with the other 30 satellite of P870 too, but something so this behavior have disappeared. So there must be a solution.

  Hello

  You're talking about your private Wlan at home?
  If you had the same problem using another laptop too, it could be possible that this isn't a problem with the network s laptop wireless card or Wlan configuration but with the WLan router.

  You should definitely reset/reboot the rooter.
  In addition, check the settings of the IP router and or mac address filtering.
  Change also the type of encryption and Wlan channel.

  You have to try different combination turn off just to test the WiFi encryption and check if the laptop would connect to the Wlan open correctly.
  But the Wlan encryption must always be defined in order to avoid improper use of the Wlan access point.

• Satellite M70: I can't connect to the WLan access point

  I have several wireless laptops, all work fine - except my M70.
  I use Intel Proset, and he sees the access point, but says "unable to connect" when I try.
  The signal is high (2 meters distance).

  I tried with WEP, WPA and without security. I am absolutely convinced that I entered the right keys.
  The access point is a Belkin Pre - N-, but I tried with a point of access 3Com, with the same problem - my Ipaq, my other PC, and all guests can connect,- but not my Toshiba!
  The wireless card is the standard Intel, with the latest driver from October 2006 intalled.

  Getting desperate...

  Hello

  If you get a signal strong, so I guess that the laptop is already connected to the access point. Or am I wrong?
  On my laptop, the computer WLan small icon appears only if I connected to the Wlan and then I can see the State of the signal.

  However, you suggested to use the Intel Proset utility to configure the WiFi network but on the clean Windows configuration. Have you tested it?

  This question seems very strange to me.
  Sometimes it of not possible to connect the WiFi network because of poor compatibility between the router and wireless network card.
  My router supports Wlan AB mode and my second card for computer laptop support BG.
  That's why I m not able to connect to the Wlan. Maybe it s also your case.

  On my router, I can also put the MAC address filtering. You should check this option on your router.
  But generally it is not easy to say why it happens. You know you should check every single option and if it s not possible so I guess that it s a compatibility issue.

• Can E3000 to function as only access Point or should I return it?

  Hi, Ok, I know I acted probably stupid, but I needed to access as a guest of Setup wi - fi which supplied routers LinkSysys. I don't need the router/modem I want to just have a wi - fi access point. I am an advanced user and I can work with manual configuration etc.

  I tried to do a manual installation of the router, I changed the IP, mask of my network and activate the wi - fi and has worked, BUT the guest access option is NOT available unless you use the stupid CISCO connect software.

  Now the cisco connect IS NOT software work or complete installation, if you do not connect through the router and access the Internet, which is IMPOSSIBLE for me to realize that my modem is connected to a firewall device, and we use static DSL PPPoE options and usernameme and password. There is no way I can get cisco doesn't connect to properly charge because it always "fix my connection trying to access the Internet.

  Y at - it any solution on manually properly configure this router and take full advantage of it capabilities or should I return it?

  PS: If the answer is "return" Please do not hesitate to provide me with an alternative that supports the wi - fi access COMMENTS (I do need separate vlan users to a WiFi connection to connect to the internet access BUT WITHOUT HAVING any where on my LAN)

  Thank you very much.

  Best regards, Vassilis

  As I wrote before: it is impossible with the devices that you have...

  The network of comments on the E3000 (and model consumer of any other brand with the same function) only works if the E3000 is your main Internet gateway.

• Subnet routed on the main gateway of the WiFi Access Point

  Hello people.

  I have the wireless router WAG200G. It sports a RJ-11 input and a four port RJ-45, while it is compatible 802.11 g.

  I need to use it as an Access Point, WiFi via DHCP clients accommodation in its own range (I fear not the 192.168.1.x default range). However, I need to give this subnet, access the internet via my main network which has another Beach, say 10.0.0.x, where the entry door is 10.0.0.2

  I tried the subnet routing WiFi to my front door, but apparently I'm missing something I ever managed :-)

  For those wishing to help could you please tell me through this page http://ui.linksys.com/files/WAG200G/1.00.09/Setup_routing.htm ?

  FYI, I got the Linksys in my network off main application everywhere (Linksys & PCs) static IP, nat and affecting encapsulation Bridged Mode only. That's how it worked, but for security reasons, I need to isolate this subnet WiFi.

  Any kind of help would be appreciated.

  If you used the WAG as point of access only with standard Linksys firmware, then you cannot use the DHCP server. The WAG will always assign its own IP address as the gateway via the DHCP server. The only option would be to use the DHCP relay function or set another DHCP server.

  As long as the WAG is connected through a LAN port to your existing network you connected side full LAN of the WAG in your network. You don't want to run any DHCP server on the WAG. Your main router provide DHCP service. If your wireless devices have trouble getting an IP address from your main router, which should be the first thing to solve...

• Can I use a WAG354G as access point

  I have a cable modem and a wired router. I also have a spare WAG354G when I had normal ADSL. Can I replace the router with the WAG and just use the other 3 ethernet ports and wireless so just use it as an access point? If so what settings do I or do I have to buy a dedicated router ap instead? TIA

  No you can not use this router as an AP with your Modem cable.

• Cannot connect my HP printer, WiFi access point

  Just moved to the town house. Receive internet through wi fi on my phone access point.

  Could not connect to my wireless HP5510 printer. Toshiba laptop.

  I tried everything I can think of. Help

  The link below will take you to a copy of the Manual printer. There instructions to connect to a wireless network. Check with the provider of the solution hotspot if and how a printer can be used with the hardware/software.

  This printer is connected to the Toshiba via a USB cable. HP does not provide this cable with the printer you will need to acquire a leave of a computer supply store or somesuch.

  Manual of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?product=5063582&LC=en&cc=us&DLC=en&JumpID=oc_r1002_usen_s-003_r0001&lang=en&cc=us

  Driver and Firmware:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5063582

  Note that the new firmware is available for this printer. Download and install the firmware for the printer according to the instructions. Then, restart the computer and install the driver software. Follow the prompts on the screen. Do not connect the printer to the computer until directed to do so by the instructions.

• do not use Iphone 4 as wifi access point

  I have an Iphone 4 with a 3G plan I have successfully used as Internet access point in several books.

  My main laptop is a Sony Vaio running Windows 7 Professional; in the past access Iphone used to work on this computer, but no more. Although the Iphone appears as an available wireless network, the Internet connection with it failed. This problem has been like this for over a year.

  Hi Edecunha,

  Welcome to the community of Microsoft and thanks for posting the question.

  I suggest you to contact the Apple support for assistance

  http://www.Apple.com/support/iPhone/contact/

  Hope this information helps.

• The Torch 9800's BlackBerry Smartphones Can be used as a mobile Wifi access point

  Hello

  I just got a Torch 9800 with a great data plan; Anyone know if the phone can be used as a hotspot Wifi for a PC?

  N ° the Torch 9800 can't be upgraded to OS 7.1, which is the oldest version of the OS with function Hotspot Wi - Fi.

  I hope that helps you.

• HP 15-Ay007la: Wi - Fi does not detect wifi access points. HP AY007LA downgraded to Windows 7.

  Hi again once, I went down my laptop for windows 7. And one, I installed the drivers Wi - Fi, Web page of drivers and works, but when I reboot, the wifi no longer works, I tried to download, uninistalling, install again too many times and do not work. Map Wi - Fi are correctly installed and windows doesn't detect not all bad. But do not work, displays a red one does not detect a Wi - Fi connection. Map of the Internet: bcm43142

  Have you tried pressing the F12 key to enable the wireless?

  The one with the airplane on the key icon.

  It would be the only suggestion I can offer.

  If the bluetooth driver was not installed, try the previous version...

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  FTP://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71440.exe

• How can I connect to my mobile access point android phones?

  I have a LG Vortex with OS android 2.2.1. The desktop of my PC is Windows Vista service pack 2. I have a 3g Mobile Hotspot on my android smartphone and I would like to connect my PC to my wireless phone to be able to benefit from the hotspot and connect to the internet... A reply as soon as possible would be greatly appreciated. If I can't do this my phone can also connect to a VPN. HOW do I set up my PC and phone to connect to each other within a virtual private network?

  Hello

  If your Android device is defined as a hot spot and set up to tie the Internet, connect to it with a PC is like any WIFI connection.

  Using your Vista wireless capability you're looking for the phone WIFI SSID (wireless name) and connect you to the WIFI phone.

  For Vista, http://support.microsoft.com/kb/928429

  In regards to the phone, Android configuration, as a hot spot is not so simple, the phone must be rooted and a special 3rd party apk tethering must be installed.

  Example, http://szym.net/barnacle/

• Programmatically, by selecting the WiFi Access Point to connect to.

  I'm looking for an application that uses HTTP connections to retrieve information.  We want the opportunity to connect only via wifi and after reviewing learned developer tutorials we can do this by using the "= wifi interface" parameter.  The next part of the research is to find if there is a way for the application programmatically specify the WiFi AP to connect to, in addition to using wifi only.  This woud be similar to go to Options Wi - Fi and manually choose the particular profile of Wi - Fi to use and then launch the application.  If we want to be able to do in the application.  The scenario: we have 4 routers wireless and provide us the user the opportunity to choose a new one for this particular application.  Development is done on the 8820 and curve.

  You can use the interface = wifi parameter to specify that the connection should be made on the Active Wi - Fi network, but it is not possible to programmatically select the Wi - Fi network, the BlackBerry smartphone (or your application) must connect.

• T61p as WiFi access point

  Hi all.

  I have no clue if I could make such a reflection with my T61p. I went through web pages describing step by step how to do such a thing - without success.

  Right now, I guess that there is a conflict with the dial-up connections - otherwise I don't see where is the problem.

  Has anyone tried this successfully?

  Hi all.

  I'll test a solution based on a small piece of material (over a few software): Zyxel NWD2205.

  From a theoretical point of view - it's all I need, just to share my Internet connection, my laptop - WiFi.

  I'll leave a note on its operation... I will receive the package in the coming days.

  Kind regards