I connected a Brother DCP115C for laptop Windows 7, cannot print

Similar Questions

• Computer laptop Windows 7 cannot print on PSC 2410, attached to the desktop of Windows XP on network home

  The subject little line about everything said.  I finally received the laptop to see the printer and went through Windows update to find our model of the printer, but when I print a test page nothing happens.  I tried setting up as a network printer, but could not find a driver (which he required).  Finally, I went through the local printer option to get as much as I did with her.  I also tried the XP desktop to add a printer driver for Windows 7 64-bit OS, but this option is not available... I was sharing the printer tab.

  It's very frustrating because I had no problem setting up my Vista laptop.

  Try the following: on the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, then click Windows Update, and then select HP for the manufacturer and series HP PSC 2400 during the updating of the list.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• I cannot print PDF on any printer, windows 7, cannot print pdf as image file is

  I cannot print PDF on any printer, windows 7, cannot print pdf as image file is

  Hello

  Can I know if you get an error message when printing PDF files?

  Also, please try the steps from the article below mentioned.

  https://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  Thank you

  Abhishek

• HP Deskjet 1050 (J410 series): impossible to install the software/driver of printer for laptop Windows 8

  Hi, I tried to connect my laptop (Windows 8.1-64-bit) on my printer (HP Deskjet 1050 all-in-One J410 series).  I tried to install the printer using the CD that came with it, but it shows a message "not compatible with this operating system". After reviewing previous questions here, I tried to download the software driver for this printer. None of these files have no effect with some presenting a message saying that the device must already be installed on the laptop for it to open. Anyone able to help?

  Thank you!

  Hello

  Please download the following installation package, save it on your computer (remember where) after this fight, click on the downloaded file and run as administrator.

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Your printer has only USB connection:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03775352/

  So ONLY plug the USB cord/cable when the installation process asking.

  Kind regards.

• Cannot install HP Photosmart 1000, blue screen, stops install to connect USB 2 cable for laptop

  

  Unable to install printer HP Photosmart 1000 to Compaq computer laptop, blue screen appears every

  time that I connect the cable as shown, (USB no problem installing Canon printer via a cable last year)

  The HP Photosmart 1000 printer worked fine on my old computer (XP Home Edition, ed.) pc

  until this pc has developed problems so I need to install this printer HP old (but reliable) for

  my Compaq laptop. HP printer has been connected to old pc via a parallel cable.
  HP printer has not been run on a front USB cable.

  Printer: HP Photosmart 1000, S/N: MX0BG1F2GB MODEL: HP C6723A

  Laptop: Compaq Presario V6700, S/N: CNF8102WLQ, P/N: GT814AV, OS: XP Pro,.

  Two USB ports are 2.0 compatible tested with another printer, scanner and flash

  readers. The two ports operate.
  Tested on scanner (work) USB cable

  So far, I've tried several things:

  Downloaded the latest XP driver from the HP website. (3511_enu_w2k_xp_release.exe)

  (However I do not know what to do with it or where to put it so it can be found by setup.exe

  or regardless of the cd for the printer.)
  I'll never wonder where to find the driver during the installation, because of the blue screen crash

  as soon as I plug the USB cable to connect the printer to the laptop. Even when the printer is turned OFF!

  Disabled antivirus software, firewall (Windows Security Essentials)
  and Malwarebytes... without change any help.

  Ran Check Disk... everything is good.

  Tried to install software without connected printer but when I got to where I was
  asked printer a blue screen again.

  The following information on a blue screen when I plug the USB cable of
  printer for laptop during this installation step and turn on the laptop.
  Then turn the printer on. (HP as directed in instructions to install step by step).
  (also tried plugging in USB cable while the laptop is on but printer is 'no'... blue screen still

  pop up).
  --------------------------------------
  Technical information BSOD:
  Stop: 0x0000007E (0 x 0000005, 0xF7711EC5, 0xF78DA8F4, 0xF78DA5F0)
  Partmgr.sys address F7711EC5
  Base of support to F770F000
  Date stamp 48025360
  -------------------------------------

  Never used it before so I tried the XP program compatibility Wizard I forgot. That fixed the problem with the USB cord. I had downloaded the new driver for XP but didn't know how to use it and could not open or some nomatter what I tried or where I put nothing helped. Installation using old records kept asking for files, that I didn't of course. All tried, you know the drill. Install, uninstall, and more. Went back on Yahoo search (20' e time) and found a score to the HP page where I had downloaded the driver. «How to install «...»» "don't remember that being there when I got the driver downloaded. Then I followed the instructions, once more and double click on the new driver on my laptop and installed like a champ.
  I hope this helps someone else. Too tired, you miss things.

• Full version Windows 10 downloaded and installed more than 10 hours a day for laptop Windows 7 Service Pack 1

  Hello

  Currently, I have a laptop running Windows 7 Service Pack. Yesterday, 1 tried to download Windows 10 for more than 10 hours then turned to install for centuries. So, I stopped the installation. I wonder... can I know - is it normal to take some time to download and install Windows 10?

  Thank you.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

• Difficulties to download the driver for printer HP laserjet 1020 for laptop Windows 7 (64-bit)

  I bought a new laptop from HP which works under Windows 7 (64-bit). I tried to download the driver for my HP laserjet 1022 printer - the website shows that this printer should work with Windows 7 with the driver available for download from the HP site. When I click to download the driver it starts to download, but then I get the following message "downloading lj1020-HP-pnp-win64 - in .exe was interrupted. I'm trying to resume the download and the same thing happens each and every time.

  Someone at - it solutions? Thank you

  Sarah - I dsl which is at the lower end of DSL speed and I can tell you that I sometimes have problems download from the HP site.  The HP software is quite 'bulky' and/or 'intense' (I have no other way to describe it).  If it gets interrupted it usually leaves.  My guess is that it's your connection mobile broadband is not not a connection permanently at times causing the interruption.  If you have no regular internet type, try to go to a mobile hotspot that is free in a city near you or a store that offers for free (Panera, McDonalds, Starbucks, etc.) and download the file from there.  Make sure your firewall is active and security to prevent unauthorized entry into your computer during download.

• Lexmark printer is installed on the laptop Windows 8. stop printing.

  Have been able to print, but recently to get the message 'Google chrome this app cannot print. When you check the status of the printer have obtained the documents pending in the queue. help please!

  Thanks for help. I discovered that recently installed Mcafee was to blame. However the McAfee tech people were very helpful and sort out the problem.

• install HP DeskJet 600 in Windows Vista - cannot print

  original title: install HP DeskJet 600 in Windows Vista

  I have an old (1995) HP DeskJet 600 c which works very well on my old desktop computer. I bought a USB adapter cable, to replace my old printer cable. I am trying to connect this printer to my new laptop and after that I installed the printer (with success, so he says) I click on "Print a Test Page" and I get an error message printing. I tried LPT1, LPT2 and USB001. I can't understand what I'm doing wrong. Is this printer work with Vista?

  Hello

  What is the accurate and complete error message?

  Please see the article below and check if this helps you to solve this problem.
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Windows 7 cannot print on the HP LaserJet 5 p printer

  I spent about 5-6 hours on this and am pulling my hair out...

  I have a new computer HP w / W7 Home Premium 64-bit.  And I connect to my old LaserJet 5 p via a line parallel to the printer, to a man, 25-pin (DB25), which is connected a parallel cable DB25 female that has a USB port on the other end. USB is connected to the port on the new computer.   The peripheral area is listed as only an "unspecified unknown device."

  I started with W7 canned programs add a printer, setting up devices, download the drivers. Updates to the driver.  When the test print did nothing, so I went on troubleshooting.  So, which went nowhere...

  Then I went to HP, looked through many sites of help Articles/community and finally used their technical support for BOTH the new computer area (had me re-doing the preserved parts, download the drivers through zone devices, once again, and when have not (yet), they suggested I call their "Commercial LaserJet" technician who said...) "It is no longer supported." And if the driver that you downloaded does not work, it is not MS problem, our.  Contact with them. "(Possibly), brings me here.

  I went through the MS canned his fix and downloaded manually from the site of HP (as opposed to automatic download/updates devices), only to get a message... "Windows has encountered a problem installing the driver... error occurred during the installation, because it is not digitally signed or not signed it."  Contact your hardware vendor (IE HP, which does not support)

  Well, you get the picture... I work a pretzel here... MS wrote it's HP, HP says it's Ms... and all I want is to use my printer who worked two weeks ago on my old Compaq!

  Therefore, there is an index HP I found that looks like I might be closer to the problem that said .doc, find an interface IEEE 1284 in your devices and make sure there is no error code.  So, I found IEEE 1394 or something like that (I'm not there now).  BUT no IEEE 1284. Let the only error codes!

  So, I came in contact with the service of HP, and how IEEE 1284 it there instead.  They said they do not know, and it's a problem of Ms.

  So, to dig a little deeper, I found in 'Device Manager' I might add an IEEE 1284 printer... BUT slide it towards the bottom of the list did not have the 5 p. Close, but so far and nothing to update, as in the other area of the device...

  So, I'm pretty frustrated that a HP printer cannot work on a HP computer, even after the download a driver of HP. This is 1284 IEEEE something you can put in place?

  Clues on how to solve this problem would be very, very, very appreciated!

  Thank you

  DRJames

  A driver for the Laserjet 5 p printer is available on Windows Update. See find and install printer drivers

• HP Laserjet 4 MP: HP Laserjet 4 MP - just switched to Windows 10 - cannot print

  Hi - I used my Laserjet without any problems on Windows 7 but cannot print now that I went to 10 Windows.   The Laserjet 4 MP is listed on the page of the driver for Windows 10 HP, but the directions for upgrading the driver doesn't seem to work or there is something that I'm not enter.

  In "Devices and printers", my printer shows already that it is selected with the green check mark.  When I go to "Add a printer", it does not find the printer, even when you use the option 'my printer's oldest  So I went the next step, try using the IP address. Print my printer Config pages to try to find the ip address/port, but nothing seems to match them.

  Any ideas would be greatly appreciated!

  I went through all the steps of the Windows Update, found on pilots of widows 10 for Laserjet page mentioned above, but this time, instead of choosing the LPT 1 port, I chose the USB virtual port (I remembered reading on that port for an alternative online), and it worked!  (LPT 1 was probably active before a few years ago, I bought a USB connector for the cable to the printer)

• Impression of Windows 7 - cannot print on anything, spooler running.

  Windows 7 Home Deluxe

  latest updates of Windows.

  Printing/scanning device HP AllinOne.

  Print everything to the driver file.

  First the printer print a status page of the HP application, connectivity is good. Scans also work.

  I am trying to print to the printer from any application - Word, Outlook, browser, does nothing.

  No error message, nothing in the spooler.

  Tried printing to a file using the printer default XPS, nothing there, too.

  Spooler is running,

  So I suspect something in the spooler/printing subsystem is corrupt.

  Any suggestions on what to get?

  Thank you

  RickH

  I finally found the problem, it was the permissions on files to print.

  No Diagnostics found, no more than an upgrade reinstall fix it.

  I had to do a high takeown and cacls from a cmd window.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Problem installing printer Brother MFC 7360N laptop Windows 8

  I'm not sure that my last post has been saved while this might be a repeat.   I am trying to install a brother to my computer printer windows laptop 8.  I installed the software and downloaded the drivers on the brother site.  My computer seems to recognize the printer but when I get to the screen asking me to plug the printer with a usb cord I do and nothing happens.   I checked the connections and restarted both machines.  Don't know what else to do.  Thanks for your help

  Hello Laura,

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I suggest you refer to the suggestions posted by Narasipur Suryanarayana replied on 29 March 2014 on the thread below for a similar problem and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Brother-MFC-7360N-printer-printer-in-error-state/0d3e9c5f-6681-474d-9f5f-037891e3be7f

  We know the results. We will be happy to help you further.