I have a pavillion dv9700 and I can't go on the internet.

Similar Questions

• I have a nettalk duo and I can not calls to the outside through an arris 16db modom

  I have a nettalk duo and I can't just outside calls incoming calls only y at - it a problrm

  try to support Net Talk Duo

  http://www.NetTalk.com/en/support

• I use windows XP service pack 3 and I can't connect to the internet on your laptop even if I can connect using my other devices.

  I have tried everything I can think of nothing doesn't. The strange thing is that it connects as usual and I can even use Skype and download updates, but I can't surf the net. I can't understand. I have tried ipconfig release and then renew, repairs of stack TCP/IP, Winsock reset and the use of different browsers. I ran the XP connection troubleshooting tool and received the following message, that this is probably caused by your firewall settings

  "check the settings of the firewall for the HTTP port (80), HTTPS (443) AND ftp PORT (21) port.

  The problem is that I can't change my firewall settings that I can not start the firewall and get this error message every time I try

  Cannot start the service Windows Firewall/Internet Connection Sharing (ICS) on the Local computer.
  Error 0 x 80004015: the class is configured to run as a different caller's security id

  I downloaded the hotfix from microsoft, but it made no difference unfortunately.

  I use AVG 2011 antivirus protection. I tried connecting via the wireless and wired. I did ipconfig and tried to rattle of my other devices and my router and everything seems normal because they can communicate with each other. See below.

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Administrateur > ipconfig

  Windows IP configuration

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. : gateway.2wire.net

  IP address...: 192.168.1.72

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.254

  C:\Documents and Settings\Administrateur > ping 127.0.0.1

  Ping 127.0.0.1 with 32 bytes of data:

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Ping statistics for 127.0.0.1:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.72

  Ping 192.168.1.72 with 32 bytes of data:

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Ping statistics for 192.168.1.72:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.254

  Ping 192.168.1.254 with 32 bytes of data:

  Request timed out.

  Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 4 ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255

  Ping statistics for 192.168.1.254:

  Packets: Sent = 4, received = 3, Lost = 1 (25% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 1ms, Maximum = 4ms, average = 2ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.70

  192.168.1.70 ping with 32 bytes of data:

  Response of 192.168.1.70: bytes = 32 time = 2ms TTL = 128

  Response of 192.168.1.70: bytes = 32 time = 94ms TTL = 128

  Response of 192.168.1.70: bytes = 32 time = 8ms TTL = 128

  Response of 192.168.1.70: bytes = 32 time = 13th month TTL = 128

  Ping statistics for 192.168.1.70:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 2ms, Maximum = 94ms, average = 29ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.254

  Ping 192.168.1.254 with 32 bytes of data:

  Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255

  Ping statistics for 192.168.1.254:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 1ms, Maximum = 3ms, average = 2ms

  C:\Documents and Settings\Administrateur >

  I worked on it for 2 days straight trying to find a solution and this is my last resort. I really hope that someone can help me because I even tried technicians internet ATT who couldn't help me. There must be a solution out there. I must be missing something. It must be a software problem or something simple. Help!

  Hello

  You can check this link:

  http://support.Microsoft.com/kb/920074

  Note:

  It implies also on Windows XP SP3

• I got the virus and now can't go on the internet or find my programs. Help, please

  I had a virus and now I can't get my internet and my programs. Can not connect what either.

  Hi Donna,.
  Your computer is still infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• My registry has been contaminated and I can't sign on the internet from my PC how do I corrupt the registry

  I am running Windows XP and Dell computer wants $200 fix/sign place me for future corrections to get me on my way!  PLS HELP!

  Hi TerrenceWoodard,
   
  Here is an article that could be useful for you. Follow the suggestion given in the link to fix the issue:
  How to troubleshoot the following message appears in Windows XP: "a network cable is unplugged".

• How to install all the drivers that I need for my dell inspiron 1525 when I can't get on the internet?

  I have a dell inspiron 1525 with windows xp sp 2 on it and I had to wipe and reinstall xp on it b/c I got the BSOD. Now, I can not configure a network connection, or get all the drivers that I need and I can't go on the internet. Is it possible to use another computer to get the drivers I need for this? Do you need a specific driver to even set up a network connection?

  AngelaGraves,

  The drivers you need are on your disk drivers that came with your computer.

  Here's the order of installation of the drivers. How to download and install drivers in the correct order

  If you do not have the drivers disk, you can download the drivers from Dell drivers & downloads, then copy on a USB key or drive and install from there.

  Rick

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Firefox asked me to upgrade my sound system &amp; in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. Prva Nice

  Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. I expected more of Firefox as a privacy feature!

  Sorry to hear about this, you should always beware of the pop-ups - never open or install anything, unless it is on the official website. Firefox has built-in features (and extensions that you need to find and install) to protect your privacy and security, but all users must still be careful with their browsing habits. You can report malicious links to the FBI Internet Crime Complaint Center here: http://www.ic3.gov/complaint/default.aspx

  You can also report false web documents by clicking on:

  • Help > report false Web, or
  • 

    >

    

    > Report false Web

  Regarding your malware, please follow this guide:

  • http://malwaretips.com/blogs/zombie-alert-virus/

  After removing your malware, consider extensions such as Adblock Plus.

• How can I get the six digit code for my iPad Pro? I have two other iPads and an iPod but I enter the codes I get and the Pro is just off!

  How can I get the six digit code for my iPad Pro? I have two other iPads and an iPod but I get the codes I get and the Pro is just disabled for longer and longer whenever he rejects these codes!

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• My wife and I bought hundreds of iTunes movies and music over the years. I have a terminal illness and won't last long. The account is in my name. How can I ensure that films and the songs that she and I have paid for are accessible for her after I spend

  My wife and I bought hundreds of iTunes movies and music over the years. I have a terminal illness and won't last long. The account is in my name. How can I ensure that films and the songs that she and I have paid for are accessible for her after I die?

  She needs to have your Apple ID and password. Your iCloud ID and the password if you have your own iOS device, so it can have access to these facilities. Even if she wanted to sell, it would need this information to remove the lock of activation before the sale.

• I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me? CC = en

  I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me?

  Here is the link to the LAN of your system drivers:

  http://ftp.HP.com/pub/softlib/Software7/COL15134/ob-40490-1/sp26744.exe

• 80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...
  How long this update problem occurred?
  What is the suite of security/antivirus installed and is a 3rd party firewall used?
  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  MowGreen Services update - consumer safety

• I have Outlook express 6 and I can't receive emails. I press on send and receive and it is stuck on 46 555 emails.

  I have Outlook express 6 and I can't receive emails. I press on send and receive and it is stuck on 46 555 emails. How can I solve this problem. IM only a beginner.

  If it downloads message #46 and then stops, message #47 is damaged or too big. Log in to your Webmail site server and delete the problem message.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA