I have a photosmart 6510

Similar Questions

• I have a Photosmart 6510, which will not print in black.

  My photosmart 6510 does not print in black, after that I installed all the new HP ink cartridges. I am running Windows Vista 32-bit.

  I tried all the basic tests & troubleshooting but who still have the problem.

  It allows to print from the photo tray 4 x 6 end.

  Help, please!

  Steve

  Hello bcgoodwrench,

  I don't see you mention the presence of 'BLACK'.

  
  If there was no black printing, then I would say you call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836 .

  If you are not in US , then log on to www.hp.com , bottom left there is a world map icon, click it, and then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• I have a Photosmart 6510 which prints OK but will not scan. Printer msg = "none found computer."

  I have a HP Pavilion a730n with you-verse connected Windows XP.  I know the SSID name and it is displayed in the Wireless Setup Wizard but never received the installation of u-Verse password I tried like 6 different passwords without a bit of luck.  I do not have the Scan to manage many one able to complete the installation process until I have install the wireless part.  What is my next step. Help!

  Hello foxsweets

  I don't think that the printer can work properly by plugging into the router with USB. I noticed that you said that you don't have the password wireless for your network. The article below will help you find it.

  How to find the password WEP or WPA key for your network

  Install the software of the product for a wireless network connection

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• Photosmart 6510 does not communicate wirelessly with Mac 10.8

  I have a photosmart 6510 and an imac on 10.8

  Both worked very well together, with all functions wireless works very well, until two days ago.  Two days ago, I changed my ISP and I have a new router. My mac and printer are connected properly to the new router, but they don't communicate wireless now.

  I am able to print the wireless network test results and everything seems fine.

  But when I send anything to print I get a message saying that the printer does not communicate or can't find the printer.

  So I uninstalled and reinstalled the printer drivers and all of the HP software. Everything was fine - the installer sees the device when the usb cable is connected, it indicates that the device is connected to the correct network and upon request I have unplug the usb cable.  But then I get an error warning:

  Device not found on the network:

  Wireless network settings were downloaded successfully on your device. However, your Mac could not locate the device on the network.

  Please make sure that:

  • Your Mac is connected to a wired or wireless network that has access to your device.

  • Your device is connected to the network wireless "TALKTALK".

  Click on "Start over" to try to connect using the current settings. Click 'Go Back' to enter different settings.

  And at this time, I'm stuck.

  Can someone advise please how do I get the printer to work again wireless?

  Thank you

  I think I've solved. restore the factory settings and then reconnected and the corrected IP itself.

• Duplexing on Photosmart 6510

  I have a Photosmart 6510 CQ610B and you use Mac OSX Mountain Lion.

  When I try to print a PDF file with an odd number of pages in the form of Adobe Reader duplex, it prints the first page on its own and the other pages duplex, instead of printing the last page on its own.  For example a 5 PDF page print page 1 + white, Page 2 + 3, Page 3 + 4.

  No matter what settings to choose under order of the pages in the management of the paper for the printer menu, it does the same thing.

  Help!

  Hi mandy4301,

  Sounds like it may be a limitation at Adobe. Try printing from another application like word or text edit to see if you encounter the same problem?

• Photosmart 6510 connect to the new computer with Windows 8

  I have a photosmart 6510 e - all in one printer series.  I just bought a new computer with Windows 8.  When I tried to connect my printer, an error message came up saying that I have to upgrade to Vista or Windows 7.  He does not Windows 8.  Is there a solution?

  Hello

  Download and install the latest version of the software Windows 8 below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108880-3&cc=us&DLC=en&LC=en&OS=4131&product=5058336&sw_lang=

  Shlomi

• I have a printer/scanner HP Photosmart 6510 who will now analyze.

  I have a Vista Ulitimate operating system.  The system is connected wireless.  Printer works fine.  Scanner worked but not now.  I get an error message when I try to scan "HP 6510 found" have checked the Device Manager and the device appears.  I've updated the drivers all to nothing does not.

  No changes were made to the computer.

  Help!

  Hi patricia05,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-100190-1&CC=US&DLC=en&LC=en&os=2093&Product=5058336&sw_lang=

  I would like to know if you are able to scan?

• My photosmart 6510 I have

  My photosmart 6510 is connected by USB. It was also connected wireless network but now although it always shows the router that it cannot connect to the server. I use Windows xp

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.

• Cannot scan to the computer. Photosmart 6510

  I have just purchase a photosmart 6510 and I cannot scan to the computer.  The printer tells me that I need to activate this via the printer software.  I know that I have installed all the software from the disc supplied.

  I can't find where I have activate the scan of the computer on my laptop.  Support information tells me to click the icon for the printer to my desktop, I do not have!  I tried going through the control panel and impossible to find something there.

  I go in the HP folder in my Start menu and click on scan HP that I get the following message "the machine HP photosmart 6510 series is not found".  I don't have a problem with printing at all.

  Tried to start printing and scanning of doctor and who did not make a difference. (In fact, the scan option came not on it).

  How can I fix this please?  I'm running Windows Vista Home premium.

  Hello.  Thanks for your reply.

  I've sorted really the problem now.  But let me explain what it was.

  I tried tool doctor who recommended you after browsing these forums, without success.  In fact, when I ran the scanner, he told me that he had no problem with printing, but there was no mention of the scanning anywhere.

  In fact, I uninstalled all HP software, removed the printer from my control panel.  Then reinstalled the software from the disc and then installed the printer again (I did things the opposite of the front walkway).  And the scanner function now works.

• Photosmart 6510 - no computer"found" - "Scan to computer" not activated

  Hello

  With the help of HP Probook, with Windows 7 Professional.  64 bit.

  My Photosmart 6510, I cannot scan documents on my laptop. I think that this only started happening recently when I started to use AVG PC Tuneup software, but I have district check if this may be the cause that the scanner is aunable to detect the computer.  I get the following message:

  "No computer was found - make sure that the printer software is installed on your computer and that the 'Scan to Computetr' is enabled via the printer software.

  I uninstalled the software and reinstalled again.  When reinstall it wonder "Enable scan" I agree.

  Previously, the "Enable scan" message popped up whenever I have rebooted, but that has stopped so I think something may have changed.

  Any suggetsions would be welcome.

  TX, Kurt297

  Hello

  Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-135113-1/HPPSdr.exe

  Hope he will give some answers if not reinstall full feature software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5058336

  Kind regards.

• Photosmart 6510: lines horizontal and top and bottom of page when scanning

  Hello

  Scans of the bucket of my Photosmart HP 6510 leave a horizontal line at the top and bottom of the page.

  I tried to adjust every page that I scan to align as straight as possible on the glass and this sometimes helps a bit.

  I am able to bypass the lines in culture to, but would prefer to find a real solution.

  Any help would be appreciated because I don't know a lot about the scanners, thanks!

  I've included a sample page below (the mark on the right side is not dirty glass, it has been a staple in the page):

  

  Welcome to the HP community @lgilb01,

  I wanted to tender hand to respond to your message on the lines that you notice when you scan to scan in your Photosmart 6510 bed. It seems to me that there could be some light enter when performing the analysis, causing lines. If you are only scanning one page at a time, the lines should not appear as they are now.

  Here is a troubleshooting guide for you to try. If the lines do not fade, contact HP directly to see about a replacement printer.

  HP Photosmart 5510, 6510 and 7510 e - all-in - One Printer Series - vertical stripes, lines or scratches in Copies or scans

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope I helped!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

• Photosmart HP 6510: Personalized printing HP Photosmart 6510 problem

  I have read through a couple of threads and followed the instructions to turn on 'custom' on my HP Photosmart 6510 all-in-one printing. I loaded the driver of HP Deskjet 450, which finally allows me to select a custom size of 5.5 "x 8.25". I'm trying to print on wedding invitations response cards. Wedding invitations made the same paper 5 X and can be printed without adding a new printer driver for the 6510.

  Now that I can get the printer driver (deskjet 450) to recognize the custom format 5.5 "x 8.25" but I can't print. I use a model of design by Staples and get the following errors.

  Errors - the margins of Section 1 are set beyond the printable area of the page. Do you want to continue? I pushed Yes and the printer tries to print the job abd I get the error "paper mismatch". The printer actually determined the size of the paper when I adjusted the paper tray to accommodate custom size paper.

  Troubleshooting - I tried to adjust the margins, but I have little ability to adjust in the template provided. When I adjusted the margins, I always get the error "paper mismatch".

  Any ideas on how to do more troubleshooting?

  Hello

  Please retry the procedure which should solve the problem below.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• How can I scan with OCR with my hp Photosmart 6510? I want to scan to a text of the parameter file.

  I got a new Photosmart 6510 all-in-one printer. I have the ability to scan to a .jpg file ot a .tiff or a .pdf file - just like the pictures, no form of text that can be edited. On my old photosmart printer (a 2572) I was able to analyze OCR allows you to place the scanned document in a file with the Edition of the text, how can I do that with this new printer? I thought I was adding features, do not remove them. I use the 6510 wireless on a home network. I am also on the Windows Vista system.

  Thank you

  Hi nawa4,

  Software OCR Iris didn't come included with this printer. If you have OCR software installed on your computer, you should be able to scan using this program. If you do not have an OCR program installed you can check the link below.

  http://www.IRISLink.com/C2-2093-189/IRISCompressor---create-and-compress-PDF-files-in-a-click-.aspx?adwp=SAS-IComp-us