__I have a range of printers HP psc 1200 and it's offline.

Similar Questions

• Devic is a range of printers hp psc 1310 who now is printing very slow is there a way to fix this

  THIS PRINTER WAS WORKING FINE BUT HAS COLLAPSED NOW PRINT NORMALLY AND LASTS 30 MINUTES TO PRINT A PAGE

  NEED MARKETING TO SOLVE THIS PROBLEM

  The following assistance HP PSC 1310 series examines solutions for slow printing: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01940312&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=374578

• Printers HP psc 1210 all-in-one

  I tried for days to install my HP psc1210 all-in-one printer on a desktop HP Windows Vista SP2 that my aunt gave me when she bought a new. First of all, I used the installation disk for my printer HP psc 1200 Series (which of course is not for Vista), everything worked except for the Director of printing. Site Web of HP said that I had to replace the Director with the Solution Center. I tried but nothing works. When I use the center of Solution and want to copy the same screen rises which made with the Director of printing, but when I try to run the copy my computer says that the printer is not connected.

  The printer is connected via a USB cable and I can print on various programs such as MS Word, Outlook, etc. I don't know what to do and I'm afraid if I don't buy a new printer, I don't want to mess up the computer. There the 1200 series in the list of printers that should work with Windows Vista.

  Thank you

  Hi wlb8227,

  If you are able to print from various programs, then you have the printer installed correctly. Here is a document on how to install this printer on a Vista computer. Let me know if you need assistance?

  http://support.HP.com/us-en/document/c00808543

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• Range of printers color HP 3525 lose connectivity

  I have a color printer that works super slow when the cable is connected. UN cable network and you can go through the menu as usual. When the cable is connected, the configuration of the port said disconnected on the confg page. When you unplug the network cable the port configuration shows full of 1000 t. seems the opposite of what it should be. I have reset the switch, tried a different cable and a different port on the network switch.

  Do you think the NETWORK card / motherboard is bad and two what would be the port speed if the network switch 10 / 100 / 1000?

  My problem was a small box not checked. The PIP networked to other settings.

  Works now.

• PSC 950xi and Windows 7 problem: not all pages are printed

  This problem has been reported by other at least 2 x in the past, go back for 2010, but there is no satisfactory solution that worked for everyone.  A real difficulty should not be available now?

  My PSC 950xi printer works perfectly with Windows XP.  Then I got a new laptop with Windows 7 and the 'good' HP driver has been installed automatically, as described in your Web site.  But now most of my impressions are incomplete; only the first part of the document is printed, and the last printed page is reduced by half.  Sometimes nothing prints. "Error" appears in the print queue, and I have to cancel the document to even try another impression (which then often does not work). I tried reinstalling my driver, as explained by HP, but without success

  A user suggested defining the "printer" HPCPP118 (RAW data type) processor (printer properties > advanced > Print Processor).  It worked for him.  However, it is not possible for me (and at least one other user) because the only available print processor is winprint.

  I hope you can help.   PSC 950 is not on the list of printers HP can't stand not (at least not on the list I've seen online)

  It seems to have solved the problem (1) Control Panel/hardware and Sound/display devices and printers, then right clicking on my printing device and select remove device. T (2) with printer, I unplugged my USB connector and then plugged back in and Windows 7 found the right printer driver automatically. (3) I had to wait a period of time (less than a minute) for the printer (re) - added to appear as the device by default and with the right image. (4) I never chose "Add printer" at all; Windows 7 was able to add a new when the USB connector is connected.

• How to find how many times, how many numbers in a range of numbers (number of lines and columns) has been repeated (numbers 3.6.2)

  Hello

  I have a range of numbers from B2 - B11 until the G2 - G11. For example:

  31	7	28	10	4	17
  20	13	44	2	1	39
  32	45	39	4	10	25
  26	38	27	43	12	3
  42	35	37	1	34	21
  13	39	11	14	5	37
  21	33	34	4	13	10
  31	14	1	24	35	3
  20	2	24	27	22	30
  10	34	36	32	3	27

  I would like to know who among these numbers have occurred and how many times. For example (just to have as an example): number 10 repetitions 5 times, number 13 repeated 3 times, 24 repetitions 9 times.

  Repeats = duplicates.

  I want to know all the repetitive number and how many times they repeat.

  Is there some kind of formula I can use to get there. It would be good to have the sorted result. For example:

  32 repeats 10 times

  24 repeat 9 times

  6 reps 8 times

  5 repeat 7 times

  22. repeat 6 times

  10 repeats 5 times and so on.

  Hello

  Problem of three steps:

  1. Determine the distinct values
  2. Count the number of times each appears in the table
  3. Sort by value or frequency (or both).

  The first step is easily handled by copy separate Automator Service, a Service of Automator, written by SGIII. A link to the file in post June 21 of the SG in this thread: Re: Analyzing column (maybe not the correct wording)

  After downloading and installing the service, select the cells containing the numbers, call the service, and then select the first regular (ie. non-header) cell to a new table and the dough.

  (The following assumes the new table has a header row, no column header, and you have selected - click - cell A2 before pasting.)

  You will get a list of distinct numbers in a single column (A2 - A34, of your sample and support of note).

  To count the numbers:

  In this example, the existing table is named 'Table 1'

  Enter the following formula in B2 the new table, and then fill up to the last line of the column B:

  = COUNTIF (Table 1::B:G, A)

  Results should be as shown:

  

  Sort the results on column (value) or B (frequency)

  Two types (A, then B) will be put in order of frequency, with values appear the same number of times sorted by value within this group.

  Kind regards

  Barry

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• HP PSC 1200 do not print under Windows 7 Ultimate

  I've upgraded to Windows 7 ultimate for XP have not updated from office. My hp psc 1200 works well when it's windows xp, but not when I update my windows. I finished installing the driver, but when I tried to print some of my documents. It can not print. What should I do?

  Hi zoleen,

  Welcome to the HP Forums! I see that you can not print with your HP PSC 1200 with Windows 7 Ultimate edition. I'm happy to help you! Please have a look through this guide to printing. Print jobs are stuck in the print queue.

  Hope this information helps you and have a great day!

• Photosmart HP 7520: 2 printers appear on devices and printers

  I'm not technical so need help to understand why when I look in the control panel under devices and printers 2 printers appear.  We're the printer default HP Photosmart 7520 series (network) and the other is HP96DC72 (Hp Photosmart 7520 series).  I've included a snapshort of the properties of the two printers appears under devices and printers.  I combined 3 pictures into one.  Point 1: shows the properties under the default printer with the menu drop down list 2 printers, reason why two of them?  Point 2: shows the properties for the second (HP96DC72) indicating that it is a printer web services.  Point 3: displays the properties of the default printer.

  Can someone explain what the hell this is all about?  I have a printer, but defined it in my router as a printer for printing, although I him have not used for this purpose again.

  Any comments will be appreciated.

  Thank you... Ralph

  

  Hello

  Those are two logical printers, and you can use both:

  1. the first condition is connected to your WiFi network normally.

  2. the other is directly connected, you can print even when your network down.

  Kind regards.

• My HP PSC 1200 is plugged into my computer and the computer says I need to turn it on, it has power to it, the power light is on. Can someone help me?

  I have a new HP computer.  It is around the age of 6 months.  My printer a HP PSC 1200 worked with her.  all of a sudden the printer does not work.  The USB cable is connected and so is power.  I have a green light on my printer, but it still doesn't work.  Can someone help me?

  If a connected USB device is not visible on the PC to which it is connected, there are three places to look for trouble: on the device, the connection between the camera and the PC and the PC.  First, try the device on another PC.  If you know that island same symptoms occur, is the printer or the cable.  Try a different cable.  If this does not work, you need a new printer or your printer needs maintenance.  If it works on the other PC, you know that the problem is your PC.  Try a different USB port.  If it still does not work, try another device on the USB port.  This should give you enough information to determine the likely source of the problem.

• I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode

  ccorr,
  Thanks for posting on the Microsoft answers Forum.  You will need to provide additional information.

  What version of Windows and service pack level are you?
  Do you get any error messages?
  If something has changed on your system prior to this issue (hardware or software)?
  What "Startup disk" do you have?  It is the manufacturer of PC?

  Here are a few things to try:
  The first thing to do is to boot your system and start pressing F8 as soon as it starts booting.  You will get the Windows startup options screen.  Select "Disable automatic restart in the event of system failure" and let it restart.  When it starts, it can now stop with an error screen and give an error message and code.

  Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start.

  Post back with the error information and results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have 3 computers in a network; two Vista and one running windows 7. The computer of windows 7 can be placed in the network map.

  Hi, I have 3 computers on the network; two Vista and one running windows 7.  The computer of windows 7 can be placed in the network map (and I seem to be unable to it remote desktop).  This could be the cause?  I tried everything in the help documentation.  My router is a linksys 610n.  Computers have no NVIDIA cards or controllers.  Here's a screenshot of what I see in the network adapter:

  Hello

  Excellent Sam Job Varkey information should contribute to solve in this case, however some is
  Added information that can help as appropriate:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to connect two printers to a network and be able to print wihout turning on their own computers?

  * Original title: printers?

  Hi all... I have 2 two computers running... two usb printers on windows 7 and two 2 are their in any case I can plug such things so that we can use either of the two printers WITHOUT having to turn on both computers? now, we can use either one but must run on both computers to. in other words, I have to turn my wifes computer to use its printer and she in turn on mine to use my printer. It would be nice just to have turn on the printer, we wanted to use (never we have ink for).

  Thks in andvance

  neither one of the printers are wireless both have usb cords

  If your printer is not wireless or network capable, you can buy USB printer or servers that connect to your network and printers.

  They then become the network printers.