I have a wireless negear connected my labtop unable hostname querry

Similar Questions

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Wireless network connection problem

  Nice day

  I have a wireless network connection problem and I ask for help to resolve.
  What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

  Other devices and computers connect with success so I think that the problem in my laptop.
  I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
  Troubleshooting of Windows detected 'router or access point issues '.
  -Reset the router does not resolve the problem
  -Network adapter is enabled.
  -State of wireless card "working properly" and "update".

  I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

  * My laptop info. :
  DELL INSPIRON 3521
  Windows 7-64 bit
  Dell WIreless 1703 802.11b/g/n(5.2GHz)

  Sorry for this long to make, I appreciated all the help.
  Thanks in advance.

  Hello

  Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

  I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

  In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

  Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

  I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

  Todd

• Wireless network connection - stay connected in our linksys router and switch to a connection TataraTmp

  We have a wireless network connection, but it will not stay connected continuously, it switches to another network, called TataraTmp, and it won't let me delete or reset the settings.  Can someone tell me what it is and how do I get rid of him?

  Thank you

  just uninsralled o2 connection manager and tatara tmp disappeared, so his tied up with the o2 connection manager I did as the connection manager as it shows the use of services to mobile broadband, but I fear its useless if he messes about connect me to my router home as tatara tmp thanks o2

• You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

  You can use your apple TV without an internet connection?  If so, how do install you it?  I have currently basic cable and that you have a wireless router.  Thank you

  What you want to do with the ATV without an Internet connection?  It is designed as a device of Internet broadcast, so you can access online content via the big screen in the living room rather than the pocket computer in your pocket...

  technically I think its possible but you would still need an Internet connection for the installation and update of the software process and even less to download applications and games, but if you don't have an Internet connection apps/games will probably not work. I don't think that there is 'out of play'...

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

  I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?

  Download wireless network drivers

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.

  If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.

• I have the wireless option, but if I use it not I can't connect to the internet.

  I have the wireless option, but if I use it not I can't connect to the internet.

  original title: difficulty borrowed from internet

  If it's the Acer utility, it is best to visit Acer support:

  http://support.Acer.com/us/en/default.aspx

• I have a controller wireless xbox connected to my pc with a charging cable cable that connects to the front, middle, my pc will not recognize to use

  subject, I want to play games on my pc with my xbox controller, it is a wireless controller, but I have a cable that connects to my controller and a usb port on the other end that connects to my pc, my pc does not recognise to use... what I do

  Hello

  The question you have posted is related to the Xbox and would be better suited to the Xbox community. Please visit the link below to find a community that will provide support to ask you:

  http://support.Xbox.com/en-GB/

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have a problem to connect several computers to my wireless D - LINK DSL-274 DR

  I'M ON WINDOWS VISTA

  As soon as we try to connect more than one computer, we lose our connection

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try the steps from the link below.

  Network connection problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems

  Method 2: Try the steps from the link below.

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For your reference: Setting up a wireless network: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network

  Hope this information is useful.

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• VPN with Sierre Wireless Module connection does not work in a constellation

  Hi, I use my laptop several times outside the office. If I have the ability to connect via WLAN or LAN, everything works fine.

  I use the Cisco VPN Client Version 5.0.07.0440, the built in Sierra Wireless Mobile Broadband Network Adapter Version 14.11.1050.69 driver.

  I'm liviing in Austria and I use the network 3 G/LTE auf "drei". I've been in contact with the customer of the "drei", they checked whether there are Port restrictions. If I put the SIM card in my smartphone and use my laptop via WIFI and a WLAN access point provided by my smartphone everything works fine. If I put the SIM card in my laptop Toshiba internet works very well, but I'am could not join my business network. The Cisco VPN Client is able to authenticate with the user name and password. The VPN connection is safe, but if I use ping to check if I can reach the server, I have 100% packet loss.

  Any ideas I can try to fix this?

  THX Daniel

  If I put the SIM card in my laptop Toshiba internet works fine, but not able to reach my company network I'am

  According to your statement, the laptop could be connected to the internet via 3 G networks.
  However, the VPN on the 3G network depends on the State of real network (coverage, signal strength, etc.).

  Here you will find a FAQ on this topic:
  http://APS2.toshiba-tro.de/KB0/FAQ8A02GN0000R01.htm

• Equium M40x - wireless not connect not

  I recently changed ISPS to Orange for Virgin [cable] I used the Orange Livebox provided with my laptop and there is no connection problem. Virgin provided me with a Netgear WGR614 wireless router.

  Now my Equim will not connect to it. Can anyone offer a beginner assistance or advice? Is there a necessary driver update or do I have to buy a new wireless card for my laptop? My wireless network connection is currently via an Atheros AR5005GS.

  Don't you see your router's WiFi network and can connect? Don't forget, you must enter the key again to your new router.

  If this isn't the case, I think that the thing with Netgear router is to activate the wlan functionality.

  To do this, you must connect the router with normal lan cable. Then enter the IP address of the router in the internet browser, you can find this information in the manual with user name and password too.
  Try this, as I don't know what exactly is your problem with your wireless connection.