I have hp officejet pro 8100

Similar Questions

• Blue screen - Officejet Pro 8100

  Hello

  I already have a few blue screens (Windows 7 Home Premium 64-bit) after installing drivers of origin of DVD on my laptop. I have the Officejet Pro 8100 printer. Since my laptop crashes all the time, I had to remove drivers.

  What can I do?

  Kind regards

  Hello

  It seems that this solves the problem that is described in this post. After a few days, everything works fine.

  Thank you

• OfficeJet Pro 8100 - new router - can't connect wireless

  Have an Officejet Pro 8100

  Has been configured on my home network for the USB connection or wireless printing before

  Old router has not installed this new router

  Cannot be configured for access through a new wireless router

  * When you run the installation of the printer asks to plug a USB cable - I plug in - then it passes to the ask for password wireless but then say errors

  "To configure the network settings for the selected device, please temporarily connect via USB. The device can be disconnected from the USB, once the network settings are transferred. »

  BUT the USB IS plugged

  Have tried completely uninstalling printer, software, drivers, etc and then make complete re-install-without success

  Router is an ASUS RT-N66U

  Wondering if there is a way to do a complete factory reset to clear the memory of the printers I've tried unplugging, wait 5 minutes and then plug it to a real reset without success complete.

  All of the suggestions that I am at a loss.

  Hi bketchy,

  This new router has two differnet built-in radio. You must ensure that you connect to the printer the correct SSID name for 2.4 GHZ radio. If you have both the 2.4 and 5.0 GHZ configured with the same SSID, you chnange the SSIP mame which should allow you to connect to the printer. Follow the steps outlined in the document below.

  Unable to connect to a wireless network

• More than a printer HP OfficeJet Pro 8100

  Hello

  I need to buy two printers wireless to use with an iPad.

  But the thing is: if I install TWO identical HP OfficeJet Pro 8100 under the same wifi network, how can I know that I want to print? In other words, my concern is that when I want to print a document using the iPad it will show two printers, but both with the name "HP OfficeJet Pro 8100". Having in mind that each printer is located away from each other in my house, I need to print under the right printer.

  Is it possible to change the name that appears on AirPrint so I can distinguish the two printers? Something like "Printer-Studio" and "printer-bedroom"? Or something that works somehow...

  Thank you.

  Pedrosacelso,

  It is possible to change the name of the printer, many customers buy more than one printer to a desktop environment and need to change the printer name to identify the printer.

  If you have problems with the above steps back on the support forums.

• OfficeJet pro 8100: run dll error message

  used to have officejet pro 8100. It has developed a problem. has been told by hp don't have service location so that it sets, had to buy a new printer. did you uninstall to remove the system of 8100. everything seems to be ok. did the installation for the new printer, officejet pro 6830, and it seems to work well.  now the problem... whenever I restart my computer, I get this error message. How to stop?   "Error loading C:\folder\folder\HP OFFICEJET PRO 8100\bin\HPStatusBL.dll" HOW DO I GET THIS TO STOP?

  Hi @bigkahuna404,

  Welcome to the HP Forums!

  I see that you get a runtime error message with your old printer HP Officejet 8100, after uninstalling the software. I'm happy to help you!

  First of all, I would suggest trying the fix it MS, program by Microsoft. If this does not work, you will need to manually remove/disable the item from your startup programs. How to disable Vista and in Windows 7 startup programs.

  Hope this information helps and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Officejet Pro 8100: HP Officejet Pro 8100 - do not recognize tray 2 in the system set up (10 surface 4 pro runningwin 64 bit)

  I have a HP Officejet Pro 8100.  It is connected by the network of my 4 Surface Pro running Windows 10.  When I add the printer in the printer and window Deivce, he finds the thin printer.  In the printer properties, it shows Tray 1 and the duplex option.  However, it doesn't show a tray 2.

  I searched the forum.  I do the following:

  1. turn off the printer

  2. Remove Tray 2

  3. fed up printer

  4 tested - test page printed

  5. power off

  6 added tray 2

  7. power

  in settting printer - no tray 2 listed in the properties of the printer not-online setting tab

  suggestions?

  Hi Davidro,

  Thank you for your answer!

  For the moment, please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will help you!

• HP Officejet pro 8100 cannot wifi access point?

  Yesterday, my HP Officejet pro 8100 arrived and I try to connect via wifi. I thought that it need access to infrastructure to print via wifi.

  When I turned on the printer I osserved that he create a stand-alone gateway with SSID: HP-Setup-7 a-Officejet Pro with IPv4 server address, etc...

  I was very happy and I printed a page with my smartphone samsung s4 directly connected printer access point (no wifi direct wifi except standard).

  Has been held today has changed, but I can't use printer with its own point of access, but only with an external wifi access point.

  Can someone help me, please? It could be a hardware problem?

  Thank you

  Luca

  P.S. to the webserver I checked 'connectivity point of access' (di accesso instradamento wireless in Italian Punto) is checked.

  Hello lucait

  You are right that the Hp Officejet PRo 8100 is a single function printer which does not directly optional wireless. You can always do what you want to do, but you will need a router to connect the printer to a network, and from there you can use the network routers or set up the feature ePrint for your portable devices.

  I hope this solves your post. Thanks again for the display on the HP Forums. It has been a pleasure. Have a great day!

• Re: HP officejet Pro 8100 will print from an Iphone, but not from my windows laptop

  My OfficeJet Pro 8100 print wireless to all laptops and tablets, but not of LENOVO Y530 my wife, under VISTA Home Premium, 64 bit OS.

  I've been on the LENOVO site and of course, it didn't help.  There seems to be little help here as well and I have been unable to determine what needs to be done or downloaded for this laptop.  Can provide you any assistance?

  Thank you

  Bob Lewis

  Hi @bugaloo and welcome to the Forums of HP!

  I see you are having problems printing from your Lenovo. I would like to help!

  Have you installed a software?

  I recommend to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet Pro 8100: Can not find the driver for the Officejet Pro 8100 online

  I've recently updated to Win10 (the free update, I do not know how many bits). I also then changed my wireless carrier. Now my laptop is not connecting to the new hub, and it seems that there is no driver more - so I don't know if these changes are the problem, or one of them.

  I tried to install a new driver and I first started the process, but the printer not print report pages, and then the laptop don't would not recognize the USB cable, even though it had been plugged in all the time. I tried to remove the cable and reinsert; also turning the printer market, but cela did not work.

  I also have Virgin and with them her reset the hub, but the hub still not connect to the printer.

  Now when I go to the page of drivers hp and it identifies my product, it then tells me there is no drivers for this printer now, and I should come back later in case they are developing.

  I can't believe that this is true. Can you please give me a link to a page where I can find and install the driver?

  May also explain why the cable USB is not recognized?

  Thank you.

  For your convinence: driver HP Officejet Pro 8100 that supports Windows 10

  Last updated driver, click on "Support" tab above and "drivers software &" or just google.

• HP officejet pro 8100

  I have a 4th Gen and the OfficeJet pro 8100 iPad.  When I go to print, it won't give me a way to change the orientation so I can print some large items in landscape mode.  I have applications to the printer but none presents a way to choose the direction and it does no menu on the printer either.  It's a great printer otherwise.  Thank you.

  I don't have the information on your part, but I found another function to work from the app that will give me the results I need.  Thank you.

• OfficeJet Pro 8100: Lost my printer drivers (after a Windows 10 update)!

  Hello

  After the recent Windows 10 updates (one installed on Christmas day), I lost my (custom installed) to the printer drivers. No big deal I thought, ONLY MIcrosoft MOST inconvienience - I'll reinstall just them. But when I open the properties of the printer Panel, I found that ALL ADVANCED TAB where I needed access to reinstall drivers is now GRAY and completely unaccessable! I not only lost my custom drivers, I also lost my second tray of the printer (installed optionally) capacity! YES, MERRY CHRISTMAS!

  Now I need help to reinstall (they gave me specific instructions for installation, so I won't bumble worse trying to install them differently (as a regular driver) without confirmation first.)
  This is a PERFECT EXAMPLE of why we should be allowed to choose for outselves when and what updates to install on OUR computer! I checked the Windows Update history and there is NOTHING there that would strike even he would have had to change printer drivers, nor I anthing that would affect them being changed (for example, allowing control HP from my PC to automatically updated drivers), but clearly something changted them.

  What I HAD... I use a printer Officejet Pro 8100 bought two years ago February next with the option second tray of the installed printer. I also use Officejet 8600 drivers in order to be able to print my graphic files properly (these drivers were recommended on this forum once I have posted having problems printing after the first installation. These drivers worked PERFECTLY in all of my PC (running Windows XP, 8.1, and 10), but now with the missing options, everytting is printing through the upper status bar (where I have a THICK paper). I don't have the ability to choose which try to print (Tray 1 or 2), and I need to change paper whenever I want to print on different paper (I always had a THICK paper on top (Tray 1) and plain paper in the lower part (tray 2) because it would not print thick paper from the tray at the bottom.

  To use the 8600 drivers, I was given specific instructions (on this forum) on install in the section "NEW DRIVER" of the ADVANCED TAB in the properties of the printer. Now that I don't have access to this tab, I need to know if there is a way to access new (my preferred method) OR another way to install (for example just install them as if I would install the printer (8600))?

  It's free enough explainatory tab FULL area is GRAYED OUT, but in case there are any doubts, I have attached is a screenshot showing what he looks like.

  I apprecate any help you could offer.

  Kind regards... Chugbug

  

  OK, now it's really WEID!

  I tried during the last 24 hours to get to the Panel in question, including the restart of Windows at least half a dozen times without success.  But now tonight after that I dug around the different tabs, once again, INCLUDING clicking on through security and permissions panels (but not to make changes) AND for posting my question here, all in the advanced Panel was suddenly accessible once more!

  I reinstalled my 8600 drivers again, then reset my printing (default) preferences (paper 2 / plain plateau), and everything is good again (kumbaya...)!

  Good thing, I took a screenshot of it (grey) or I can't believe myself!

  Happy holidays!  Chugbug

  Screenshot showing access with my 8600 drivers installed:

  

• HP Officejet Pro 8100: change the ssid

  I recently tried the Hotspot to unite AT & T.  That has worked very well but not decided to take it and went back to my Airport base station and the old service provider.  When I tried to connect my printer to my network - a printer works fine but the HP Officejet Pro 8100 will not change back the Name (SSID) the name for the old SSID hotspot network.  Since I was a new AirBook Pro I have to connect the cable to a USB port and then run the utility for my printer and select network.  It does not connect.  Any suggestions?

  Thanks for your suggestion. I tried this many times and it would be not just to reset the ssid. So after writing my post, I tried pressing the wireless button and the on/off switch at the same time. I went to try out some other combinations and print the configuration page. He changed the ssid for the correct name. Of course then I had to do what you described. Go to the printer utility with the cable connecting the computer and the printer and click on network. It has finally connected and I unplugged the cable between the computer and the printer. No problems now. Thanks for responding so quickly and hope it helps someone else.

• Change the SSID on a HP OfficeJet Pro 8100

  Hello world

  I've updated my router from WEP to WPA2 wireless and may not know how to upgrade the SSID on the OfficeJet Pro 8100.  I've updated my consoles of mobile games, televisions, thermostat etc to the new SSID and password.

  I don't have the installation CD.  I have the USB cable.  I run the HP 5.19.2 utility.

  When to connect the printer to the computer with the USB, I access the HP utility, click 'Network settings' to the program extracts information and provides the following error msg:

  "The task of network settings is not currently available.  Please make sure that the device is connected to a network. »

  Well, I know it is not connected to the network, I just need the screen to enter the new SSID and password.

  Other information that might be useful:

  Operating system: OS x Version 10.9.1

  Model: Officejet Pro 8100 N811a

  Service ID: 23267

  FW version: TSP1FN1148IR

  Driver version: HP inkjet 3 pilot 3.3.3

  Thanks in advance for any help you can provide.

  How I finally got to work on a Mac running 10.9:

  1 connected via USB to a Mac

  2. system preferences > Print & Fax > search for the printer in the list on the left > use the button + to add the printer if it is not there

  3. install an ethernet cable from the printer to the Mac even

  4. with the printer selected in system preferences, click Options & supplies

  5. click on the utility tab at the top

  6. click the button Open Printer Utility

  7. all the settings > network settings > Hello parameters

  8 select Hello if it is not enabled, click the URL next to your device to the URL address to access:

  9. to the web page for the URL, click on the network tab

  10. click on wireless configuration wizard, click OK, ignore SSL warnings, enter your printer admin password if you set one

  11 to run the Wireless Setup Wizard

• HP officejet Pro 8100 printer tray

  I have a printer HP Officejet Pro 8100. I removed the tray paper this morning to load the paper, and now I can't seem to slip in all the way. It stops at about 4 inches short of closing.  I feel like a fool! How can I get in trouble by dragging a drawer in?  Are there clips etc I should have in place, etc., that may have to be turned off?

  Hello

  You could try to raise the front of the printer to see if something done obstacle from your desktop.  It should slide right in.

• HP Officejet Pro 8100: HP Officejet 8100 N811a - network connection is not possible

  Hello community,

  I have a pretty standard network with 3 points of access, WPA - PSK authentication, TKIP/AES encryption, running on channels 1-11. I made the MAC filtering is off and DHCP is on.

  The printer connects to the network, or via the software of HP Doc or the EWS settings.

  It's however possible to connect the city nearby networks so I must be overlooking something.

  After that under the HP Doc and he's trying to set up the printer I just get an exemption from the unknown error.

  The printer prints fine when connected by cable.

  The Network Configuration after the eroor HP Doc said

  Wireless on : Pass
  Wireless Working : Pass
  
  Connected : Not Run
  
  Network Name Found : Pass
  
  Printer Settings Consistent : Not Run
  No Filtering : Not Run
  Channel : Not Run
  Security : FAIL
  
  And in the Configuration it lists the SSID but IP Adress states : not applicable
  

  Ideas?

  Hi @NK10,

  Welcome to the Forums of HP Support!

  I see that you are unable to connect wirelessly with your HP Officejet Pro 8100 printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you mentioned that you have "3 APs, authentication WPA - PSK, AES/TKIP encryption, running on channels 1-11 I made sure MAC filtering is off and DHCP is on. »

  First, I'll assume means AP access point.

  • WPA2-PSK (TKIP) WPA2-PSK (AES) and WPA2-PSK (TKIP/AES) are all different encryption options. Which one do you use?
  • Do not use more than one type of encryption at the same time, what access points help.
  • The router is connected to one channel at a time, not 1 to 11. What channel are you on?
  • DHCP should only be enabled on the router and disabled on each access point.

  Looks like the access points are configured incorrectly. They should have the same type of encryption and be on the same channel as the router. If the printer works well on the wired connection the wireless network configuration is causing a conflict.

  Tips for a successful wireless connection:

  • Using a unique network name (SSID).
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch?
  • Do not use a network of comments (SSID).
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • Update the firmware on the router.

  For troubleshooting purposes, follow these steps:

  1. Disable all access points.
  2. Connect the printer to the router wirelessly.
  3. Test print.

  If the printer works fine wireless connected access points, you must reconfigure the access points correctly. HP does not support the networks with access point, additional router or switch, etc. The complexity of the configuration.

  For more information, see print wireless Center.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!