I have the cloud drive

Similar Questions

• Hi there, I been using MacBook Air and IPad2 for awhile. Recently, I lost my MacBook Air and am interested open ICloud to check my folder/old records. Can I get directions to the opportunity to see my files in I have the cloud.

  Hi there, I been using MacBook Air and IPad2 for awhile. Recently, I lost my MacBook Air and am interested open ICloud to check my folder/old records. Can I get directions to the opportunity to see my files in I have the cloud.

  I hope that you are not in a surprise but a MacBook Air not backup to iCloud. It can record data in iCloud drive (if you saved it specifically to this place) and can synchronize Photos, Contacts, etc to iCloud if you had set it to do. You can use any computer and connect to https://www.icloud.com/ to see what is stored. I hope this is good news and that it contains what you hope.

• I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

  I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

  Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Thank you

  Bev

• I bought the iPhone 6 I have the cloud on which is active and I did not I have cloud id and password of any solution?

  I bought the iPhone 6 I have the cloud on which is active and I did not I have cloud id and password of any solution?

  Hey zeeshan137,

  I understand that you have purchased an iPhone who may have active locking activation. Here's an article on this topic and how to solve the problem:

  Turn off find my iPhone Activation Lock - Apple Support

  https://support.Apple.com/en-us/HT201441

  Thanks for being a part of the communities of Apple Support!

• WIN 7 does not have the net driver for Asus A2D WHAT CAN I DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.

  WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
  WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
  Thanks for any idea, address etc.
  DragMil
  You can wito to * address email is removed from the privacy *.

  Try an older driver installed in compatibility mode

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Hi, I have the cloud creative apps on my desktop on my laptop but I just got a new laptop and you want to transfer these apps on my new laptop computer?

  Hi, I have the cloud creative apps on my desktop on my laptop but I just got a new laptop and you want to transfer these apps on my new laptop computer?

  You must download and install Adobe Creative Cloud desktop application, using that you can install the CC apps. :

  Download and install Adobe Creative Cloud apps

• I have the Cloud creative students and teachers. I installed everything, but Photoshop CC 2015 continues to ask a licensenr.

  I have the Cloud creative students and teachers. I installed everything, but Photoshop CC 2015 continues to ask a licensenr.

  Hello

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• I have the cloud creative adobe installed on both computers.  Now I bought two new computers and need to know how to download on new computers and remove them from my old computers

  I have the cloud creative adobe installed on both computers.  Now, I want to delete my old computer and install it on my new computer.

  Install them the same way you did with the original facilities.  Jjust sign off the 'old' and new.

  Download/install the desktop application, connect and install applications subscription.
  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Help of activation & deactivation
  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to's

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  Install creative Cloud applications
  http://TV.Adobe.com/watch/CS6-creative-cloud-feature-tour-for-video/installing-desktop-app s-of-creative-cloud.

• My motherboard has exploded and I have the hard drive. How can I copy the address book for a new installation on a new computer from the old hard drive?

  I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  https://support.mozillamessaging.com/.../home
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• Problems connecting to internet - says network cable disconnected, not sure I have the correct driver installed.

  Had a big storm - got the new modem.  but they said that my drivers where missing or damaged.  Downloaded Marvell Yukon of gateway - to the GT5432 model. Always says cable unplugged network. However, Bishop says peripheral device works correctly. Don't save: no update-unable to connect to the internet.  I uninstalled and reinstalled; rebboted, etc. - still nothing. It has a problem with the PCI connection - no driver, but I don't see anywhere to down load or know what to download. Oh and another adapter on - think 1394 - when I turn that on and off the wonder; It shows the signal for the 1394---400 and does not say his unplugged, but still can not connect to internet.
  The "old" computer to try to find information; noticed that said, unplugged network cable but it allowed me to connect to the internet. When I disabled the 'extra' adapter message there went, speed signal only at 100 than at the 'old' calculation is not any other PCI devices connection listed.

  I'm not sure of what continues.

  The 1st computer was working fine - then picked it up to move it to where it belonged to my office and that's when he went out-made no sense to me!

  Because you seem comfortable opening your computer, have you tried re - a corner of the map (with power off, remove the card and reinsert it into the slot, be sure to exercise static precautions if you are in an environment of low-hu7midity).  If there is an empty slot, you can also move the map Marvell to another location.  See the comments below.

  It's a long shot, because even if you did not provide the complete ipconfig output, the data that you have provided appeared to be normal, but...

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter, and then select Properties
  You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Local_Area_Connection/Properties/General/Index.shtml
  Issues related to the:
  In the upper area, under 'Connect using' said 'Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller?  If this is not the case, what does say?

  In the second box, what are the items are listed under "this connection uses the following items"?

  The only other thing I can think is that the Marvell Ethernet card was damaged in the same storm that got your original modem/router.

  *******************************************

  According to Gateway, the GT5432 has 4 card slots:
  A PCI Express x 16 (GUI)
  A PCI Express x 1
  Two PCI Conventional

  Your motherboard should look like this:
  

  Orange, top, connector is the PCI Express x 16.  You probably have a video card in this slot.

  The short white connector is the PCI Express x 1 connector.

  Two more long white connectors are the standard PCI slots.

  If I understand your installation, you should have the Marvell Yukon map into the slots of two down and your Agere modem on the other.  As long as you have the SMC1244TX PCI card, why don't just remove you the Agere modem or the card Marvell and insert the card CMS in one of the two PCI slots?  You are not using the modem and the working hypothesis is that the Marvell card does not work, so there is not much to gain by leaving a card in your computer.

  Download the user guide and drivers for the SMC here--> http://www.smc.com/index.cfm?event=viewProduct&localeCode=EN_TUR&cid=9&scid=51&pid=238 map

  Moreover, assuming that your open slot is the short PCI Express x 1 slot, you can buy another Ethernet card that will work in this niche: see--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010064%20600016290&IsNodeId=1&bop=And&Order=PRICE&PageSize=100

  If I were you, I blow up the cheaper models and get the Intel EXPI9301CT $ 36 10 / 100 / 1000 Mbps PCI Express Desktop Adapter Gigabit CT.  Note that this is the same card with a similar name (with close to 400 customers) which sells for $29,94.  The price difference is because the cheaper "BLK" letters in the description, which means that it is "sold in bulk" and has no drivers, user guide CD or anything else in the box.  There are several negative comments from people who do not understand this difference and then had trouble finding the driver for the card on the Internet.

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• Zoo Tycoon 2 error: Zoo Tycoon 2 could not create a graphics converter. Your provider of graphic adapter to ensure that you have the latest driver. »

  I am running Zoo Tycoon 2 on Windows 8 with a Nvidia GeForce GTX645.  I installed ZT2 and get the following error when you try to play: Zoo Tycoon 2 could not create a graphics converter. Your provider of graphic adapter to ensure that you have the latest version of the driver.

  I already did so that my drivers are up to date.  Any ideas?  Thank you!

  Hi Luanne,

  The problem is specific to a Zoo Tycoon 2?

  This problem may occur if the graphics drivers are damaged. I suggest to uninstall and reinstall graphics card drivers and check if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  See the link to download the drivers:

  http://www.GeForce.com/drivers

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• My new MacBook will not let me install PSE10 I downloaded from your site. I have the hard drive version but my MacBook doesn't have a CD player. Please notify.

  My MacBook won't install a PSE10 version that I downloaded from Adobe. I get a message of no reliable solicitation even though I downloaded the version of the Adobe.com website. I bought the paper some time ago for my PC and have recently switched to Mac but my MacBook does not have a hard drive.

  Define Mac GateKeeper settings everywhere and try to install again and check:

  Once the installation is finished, you can return the parameters back.

  

  

  

• I bought Adobe Lightroom at Amazon and it will not start.  Do I have to have the cloud?

  I bought Adobe Lightroom6 at amazon.  It looked like it installed, but doesn't start.  I restarted the computer and it doesn't always start.  I have not the creative cloud... do I need?

  you have a computer/os 64-bit?

  If so, you have the option 'Ignore' the warning?

  If so, ignore her and install anyway.

  If you have 64-bit win 8, update 8.1

• Currently, I have CS3 and am interested in the upgrade. How to replace and update what I already have the cloud?

  I use CS3 on my pc as an individual which is great for my needs. But for the company where I work (part time), I need to have CS6, for commercial purposes, and I will use it on my own PC, then I'd be interested in using the cloud for this. However, when I leave the company, what is happening?. Can I just transfer the license to another computer / user and reinstall my old CS3? I Uninstall CS3 in order to use the CS6 cloud in the first place?

  And all the files that I created in CS3 for my individual goal, can they be used in CS6 and then "downgraded" back to CS3. The reason why I ask is that I can't afford to buy CS6 for my personal use, but I need it for business. Who is?

  You don't need to involve the cloud if your wish is to acquire the CS6.  CS6 is still sold as a product independent non-cloud, that is likely better than getting through the cloud in view of the problems that face people with the cloud against their old products.  In this way, when you're done with everything what you work always mention have CS6 available and can still use CS3 if needed as well.

  There is no way to upgrade to CS6 in CS3.

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html