I lost my connection to manage my applications already in use

Similar Questions

• Satellite L500 - lost wireless connection

  My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "error Transmit - general failure."

  Any ideas?

  Hey Buddy,

  And now Windows recognize some WIFI networks at your fingertips? Your validation lost wireless connection isn't very useful

  You should try a WLAN driver update that you can download from the official page of Toshiba:
  http://APS2.toshiba-tro.de/WLAN/

  If you can't find or connect to WLAN networks deactivate in the Windows of the WLAN power save mode power profiles. You will need to set for maximum performance.

• I lost my connection Wireless at home.

  I have a time capsule/router.  I lost my connection Wireless at home.  Cannot get internet connection to one of my computers/devices in the home.  Help!

  Need to load more information.

  Feeding cycle you the entire network... Start up in the correct sequence?

  Modem... Wait 2 min

  TC... Wait 2 min

  Client devices.

  If this does not work...

  Tell us everything... what model is the modem? Is this also a router?

  What model is the TC... The base A1xxx please?

  The fact the main TC on... amber green or flashing led?

  Taken in a computer by ethernet that get you internet with wired connection, just all the wireless clients are turned off?

  Tell us about such things and we can work from there.

  But I suggest you a factory reset as well... Here are the basics.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• I went to the suppliers and lost my connection to get my computer also work like a TV.

  I went to the suppliers and lost my connection to get my computer also work like a TV. gives me the error that I have no configured TV tuner card to work with windows media center. He is told to go into the settings of the TV & set up your TV signal, but I don't know where it is. Please help me.

  Hi Lisa,
  Click Start, click Control Panel

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click on the driver tab, then click on set to update driver.

  Follow the instructions on the screen to complete the update of the driver.

  b Eddie

• Connection of the ADF application module

  I use JDeveloper 11.1.1.6

  I would like some advice of good practices on how to manage properly the connection module of the application.

  Here is a code example. I want to know if she properly managed in terms of DB, statement and result set connection? No optimization?

  CallableStatement stmt = null;

  Connection Conn = null;

  ResultSet rset = null;

  String sql = "start Process_query(?,?); end; « ;

  MyAppModuleImpl m = dc_bc.getDataControl () .getApplicationModule () (MyAppModuleImpl);

  try {}

  stmt = am.getDBTransaction () .createCallableStatement (_getAttributesStatement, 0);

  Connection Conn = st.getConnection ();

  ArrayDescriptor = attributeDescriptor

  ArrayDescriptor.createDescriptor ("PARAMS_TAB", conn);

  String [] [] attributes = / / initialize the table attributes;

  AttributesArr = ARRAY

  New ARRAY (attributeDescriptor, conn, attributes);  oracle.sql.ARRAY

  stmt.setArray (1, attributesArr);

  stmt.registerOutParameter (2, java.sql.Types.VARCHAR);

  ResultSet rset = stmt.executeQuery (sql);

  do something here

  } catch (Exception e) {}

  _logger. Sever (e);

  throw e;

  } {Finally

  try {}

  If (conn! = null)

  Conn.Close ();

  } catch (SQLException sqle) {}

  _logger. Warning (sqle);

  }

  try {}

  If (stmt! = null)

  stmt. Close();

  } catch (SQLException sqle) {}

  _logger. Warning (sqle);

  }

  try {}

  If (rset! = null)

  RSet.Close ();

  } catch (SQLException sqle) {}

  _logger. Warning (sqle);

  }

  }

  UPDATE:

  According to Timo, I reorganized the code as follows:

  In MyAppModuleImpl I have a processQuery() method

  public String processQuery (String [] [] attributes) {}

  CallableStatement stmt = null;

  Connection Conn = null;

  ResultSet rset = null;

  String sql = "start Process_query(?,?); end; « ;

  try {}

  stmt = getDBTransaction () .createCallableStatement (_getAttributesStatement, 0);

  Connection Conn = st.getConnection ();

  ArrayDescriptor = attributeDescriptor

  ArrayDescriptor.createDescriptor ("PARAMS_TAB", conn);

  AttributesArr = ARRAY

  New ARRAY (attributeDescriptor, conn, attributes);  oracle.sql.ARRAY

  stmt.setArray (1, attributesArr);

  stmt.registerOutParameter (2, java.sql.Types.VARCHAR);

  ResultSet rset = stmt.executeQuery (sql);

  do something here

  } catch (Exception e) {}

  _logger. Sever (e);

  throw e;

  } {Finally

  try {}

  If (conn! = null)

  Conn.Close ();

  } catch (SQLException sqle) {}

  _logger. Warning (sqle);

  }

  try {}

  If (stmt! = null)

  stmt. Close();

  } catch (SQLException sqle) {}

  _logger. Warning (sqle);

  }

  try {}

  If (rset! = null)

  RSet.Close ();

  } catch (SQLException sqle) {}

  _logger. Warning (sqle);

  }

  }

  }

  Then in my grain of support, I'm going to call this method

  MyAppModuleImpl am = (MyAppModuleImpl) dc_bc.getDataControl () .getApplicationModule ();

  try {}

  [ String []] attributes = / / initialize the table attributes;

  AM. processQuery (attributes);
  

  } catch (Exception e) {}

  manage the code here
  

  }
  

  My question is in MyAppModuleImpl,

  I got the connection, statement and result set. But I doubt that I really need to close the connection (in bold)?

  Well, the JNDI Data Source is recommended because you can reconfigure it without redeploying app and connection pool can be shared between different applications on the same server app...

  In fact, in my app, we use JNDI, is it out of the frame?

  Framework will publish connection acquired by AM to the connection pool, and application server (WLS) will manage connections in the connection pool.

  Dario

• Creative cloud will not install a willingness of manager Adobe application not install, I tried everything to uninstall reinstall Mac cleanser you name what can do and who should I contact to get this problem fixed

  Creative application Cloud Manager and application manager Adobe decided to stop working one day so I uninstalled the program and tried to reinstall them. Now they do not reinstall and will keep gives me an error message I tried Mac cleaner I tried to completely uninstalled programs and reinstall them. I even used Time Machine backup before I uninstalled programs. I did all the forum can try and fix this problem and still nothing will happen what I do and who do I go to get this problem resolved?

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat... not supported on weekends.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Driver NVIDIA OpenGL lost the connection with the display driver

  Laptop Alienware M14x

  Windows 7 pre 64-bit

  8 GB ram

  3 GB of video: NVIDIA GeForce GT 555 M

  Intel i7 2760QM

  AE CS4

  Æ keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or change the opacity of a layer. 1080 p, I have a layer of the image, a solid, color corrections, and that's all. I just got this new computer, and I've never had this problem on my old computer.

  This message is displayed after AE blocks. "The driver NVIDIA OpenGL lost the connection with the display driver and can not continue. The application must close. »

  This message is displayed in the taskbar: "display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"

  any ideas on how to stop EI do not cause my display driver to stop working?

  Thanks, Ramzi Rebeiz

  Turn off OpenGL in the AE preferences.

  Mylenium

• New MacBook Pro lost internet connection

  Fortunately brought my MacBook Pro retina display 15 "and connected to a Dell monitor. (Hours of hassle, but I have another question/problem).

  After using it for a while, I lost my connection to my home network. But my older MacBook Pro 13 and my iMac 27 were still connected.

  I took the new MacBook Pro 15 "at the kitchen. And here, I got my connection again.

  So... WHY

  And... WHAT can I do to keep my internet/network connection when my new MacBook Pro 15 alongside other computers?

  AND... Is there a use for my Airport Extreme, when my DSL provides internet and network?

  No use of Airport Extreme is not mandatory

  I use Dlink router and modem and all the Apple stuff in our home works very well

  That said-

  Press Option - then click the WiFi icon and click the wireless diagnostic tests - the process of

  If nothing remarkable is found - let it run in the background as you go about your work

  Also, when you do this - take a screenshot of the gray information and post a photo

  Finally two points-

  1. you have indicated this is a new device - is there sufficient numbers DNS for the tour of your router?

  2. do you know if your router provides 2.4 GHz or 5 GHz of bandwidth?

• Can not backup iPhone 5 or connect to cell phone applications

  I've just updated to 9.3.1 9.2, thinking that Apple had solved all the problems reported with 9.3.  However, now my phone is not connecting to cellular telephone applications, siri does not work, and the phone will not save.  It works fine when connected to wifi, but once I leave the House, none of my apps won't work (letters of google maps, Facebook, apple, anything that requires cell, that's all!)  I made all the simple fixes that I have known and that you can find on the internet: restart button apple button and power off to restart, turn off cell phone and turn it back on, turn off wifi and turn it back on, reset the network, iCloud is disconnected settings and reconnect, deleted all my photos/reset the backup settings so there is a lot of storage on my cloud , is found on my head, turned left, and none of it worked.  I'm ready to reset all but without a backup, I'm afraid to lose all my contacts.  Anyway around this?

  Does anyone else have this problem?  Suggestions and help that I have already mentioned above is welcome.  Thank you. Unhappy in Portland and the thought of Samsung is in my future.

  Backup to iCloud only works in Wi - Fi, you can not use a cellular network connection to backup your phone to iCloud.

  If the iCloud backup does not work, back up your phone to your computer using iTunes and set it back to factory settings, and then restore from that backup.

  On safeguards in iCloud and iTunes

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Restrictions put in place in settings/general/Restrictions?

• Lost internet connection - rogue app?

  Hi, I have downloaded a widget to toggle 3G last night and tried it out. It did not work so I uninstalled, but now I find that my phone is now more able to get an internet connection - it seemed have lost internet connection as soon as I typed on the widget.

  Is it possible that the app screwed up my phone this way, or is there another explanation (I'm trying to discover my carrier right now if the network declined - I can still send and receive text messages)?

  I have to reset my phone?

  Too bad. My career has simply returned internet settings on my phone and now it works again.

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• I forgot my ID Windows Live ID and cannot connect to manage my website. Anyone know how to recover a forgotten or get a new one that will allow me to access my site?

  I forgot my ID Windows Live ID and cannot connect to manage my website. Does anyone know how to recover a forgotten or the steps I must take to get a new one that won't let me access my site?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!