I performed last good Configuration known because of start-up problems, since then Internet Explorer 8 does not not in Windows XP.

Similar Questions

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• How long does take to load know last good configuration?

  Waited about an hour. How long does take to load know last good configuration?

  It should not take more than he does start normally.  The Configuration of the property last known (LKGC) is a copy of the control set that was used last successfully start the machine, the boot is only considered successful once you log on to the computer.  When you connect successfully on the control set used to start the machine is copied on a numbered control (HKEY_LOCAL_MACHINE\SYSTEM\ControlSetnnn) the value and the value for LastKnownGood in the HKEY_LOCAL_MACHINE\SYSTEM\Select is updated to represent the LKGC.  Changes that you make after you log on is not registered in the LKGC.

  In general the LKGC is useful when installing hardware or drivers or when incorrectly configured services prevent Windows to start.  On an operational computer the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet represents this set of materials and services.  It may be useful:

  Information on the last series of well-known control

  What are control sets? What is CurrentControlSet?

  John

• What has replaced the last good configuration in windows 8

  Hello

  I hear 2 weeks there is a member of the microsoft community this last good configuration does not exist anymore in windows safe mode 8.

  is this true? If Yes, what feature has replaced the last good configuration?

  Thank you

  Joha

  You can access all the options of recovery like this:

  1. Click the Power Options icon, and then hold down the SHIFT key while you click the Restart option. Keep now shift until the screen shows it restarts.
  2. On the first screen that appears, select troubleshooting, and then select Advanced Options. Finally, choose the boot settings and click Restart.
  3. On the next screen, you will see things like Safe Mode and service options which would be "last well known."

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

  Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

  Hello

  You can manage this through the "Manage scene numbers" option in the menu 'Production '.

  There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

• After that switch on my PC works for a minute then stops, this happens 3 times then starts with the last good Configuration

  It started only four days ago, I spend on the PC runs for a minute then stops. This can happen in 3 or 4 times. can Ichoose last good known Configuration and running a CHKDSK and usually begins.

  Hello

  1. Since when are you facing this problem?
  2. Did you make any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  If the computer works fine in safe mode, then I suggest you perform the check and clean boot if this can help:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  For more information, see this link:
  http://support.Microsoft.com/kb/320299

  It will be useful.

• Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

  Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

  Any ideas on how to get this resolved?  Thank you!!!

  Hello

  The problem is since it will not run the startup from the Windows 7 disc repair you then you
  need some kind of support, and the cause is likely to be material. A Dell thing you want to do
  is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
  data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
  as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
  data on removable media such as CD, DVD or other external USB drives.

  Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
  perhaps others with the same problem.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
  Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
  can be in effect regardless of any warranty.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• in my bonus collector since the last day, keeps giving me a message: GREAT TO KEEP PLAYING PLEASR RECONNECT: it does not add the coins and .please difficulty

  There is not much else, since the last update I can't collect coins of the bonus because of the message auto collector to reconnect. I clicked and nothing happens. can you help me with this

  Hi janetgriffin,

  Thank you for your question, and I'm sorry to hear that the bonus collector does not work. Please make sure that Firefox is configured to connect to the internet, the same way your computer. These settings are in this menu:
  Firefox > Options/Preferences > advanced > network >

  The error is a common player http://service.real.com/help/faq/top5/rp_cannot_connect.html problem help please this as well. You can temporarily turn off the firewall and Antivirus as well to ensure that it is not blocking the connection.

  I hope this helps.

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• Firefox off telling me to upgrade to the new version of the flash plugin. I can't upgrade to the latest Adobe flash player 11, because it does not support Windows Vista 64-bit. So now what am I supposed to do?

  I have Windows Vista 64-bit. I can not play online games on Pogo. I have already contacted Pogo & they have update me of flash player. Firefox disabled by the Flash plugin. I can't update Adobe flash player because it does not support 64-bit.

  See:

  • http://kb2.Adobe.com/CPS/000/6b3af6c9.html

• Internet Explorer 8 is not related the last when used correctly

  I have Internet Explorer 8 / 9.12 MB when I go to add/remove programs, he says I8 is used frequently, but he also says, the last time it was used was 07/01/2000. Can you explain this to me?

  I have Internet Explorer 8 / 9.12 MB when I go to add/remove programs, he says I8 is used frequently, but he also says, the last time it was used was 07/01/2000. Can you explain this to me?

  Your CMOS battery is defect and not taking the date where you have turned off?   ; )

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Performance problem on the SQL query that does not use the primary key index

  Hello!
  
  I have some performance issues on a single SQL query (Oracle 10 g).
  I could solve the problem by using the INDEX indicator, but I would like to know WHY this is happening.
  
  * Tables *.
  create table jobs)
  ID number (5) not null,
  name varchar2 (100),
  primary key constraint Job_PK (id)
  )
  /
  -Record count: 298
  
  create table Comp)
  integer ID not null,
  name varchar2 (100),
  primary key constraint Comp_PK (id)
  )
  /
  -Record count: 193
  
  -Relation m: n
  create table JobComp)
  integer ID not null,
  id_job integer not null,
  id_comp integer not null,
  primary key constraint JobComp_PK (id),
  unique key constraint JobComp_UK (id_job, id_comp),
  Constraint JobComp_FK_Job foreign key (id_job) refers to Job (id),
  Constraint JobComp_FK_Comp foreign key (id_comp) makes reference Comp (id)
  )
  /
  create index JobComp_IX_Comp on JobComp (Cod_Comp)
  /
  create index JobComp_IX_Job on JobComp (Cod_Job)
  /
  -Record count: 6431
  
  * Ask *.
  
  When I run this query, the execution plan shows the index using (JobComp_PK and JobComp_IX_Comp).
  No problem.
  
  Select JobComp.*
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  But when I add the field 'name' of the work table the plan uses full access table to the table of work
  
  Select JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in the 2.70 dry
  
  With the help of the index
  
  Select / * + INDEX (Job Job_PK) * /.
  JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  * Doubt *.
  
  This behavior is correct?
  
  PS. : I tried to recalculate the statistics, but nothing changes:
  
  analyze the job calculation table statistics.
  /
  change the statistical calculation of index Job_PK reconstruction;
  /
  Start
  dbms_utility.analyze_schema (sys_context ('userenv', 'current_schema'), 'CALCULATE');
  end;
  /
  
  [of]
  Gustavo Ehrhardt

  Gus.EHR wrote:
  Hello.
  I'm sorry for the plan unformatted.
  The execution time of the querys "without field name' and 'with the field name with suspicion" are equal.
  He has no problem caching, because I get the plans of the sequence different from the querys and repeated the performance. The result is always the same.

  I don't think that there is no problem with oracle crossing LOOP IMBRIQUEE to the HASH JOIN when you include the field name and this should be the expected behavior. But it seems that your WORKING table has a degree of parallelism set against what is causing the query to run in parallel (as JOB table is now available with full table scan, instead of indexed access earlier). It could be that the parallel execution is contributor to extra Runtime.
  (a) do you know why the degree of parallelism on the WORK table has been defined? Do you need it?

  You can see if the following query provides a better response time?

  select /*+ NOPARALLEL(JOB) */ JobComp.*, Job.Name
    from JobComp
    join Job
      on Job.id = JobComp.id_job
   where JobComp.id_comp = 134