I replace 3 GB memory of 8 GB and do a 'custom' installation of Win 7 from 32 bit to 64 bit. Should I install the memory before installing Win 7 or after?

Similar Questions

• Cannot install Windows on Bootcamp after replacing 3 TB FusionDrive with 1 TB SSD

  3 merger to drive has been replaced by 1 TB SSD drive. When reinstalling OS X I see that the 128 GB drive of Fusion is still available as a hard disk, which prevents me to install OS X or Windows (Bootcamp) on the SSD.

  I tried a few ways to install:

  1. OSX on SSD (recovery Internet Mode, delete all partitions and repartitioning, SSD)
     Installation fails when you try to install
  2. OSX on FusionDrive (128 GB), Bootcamp on SSD
     OSX installs fine, Bootcamp does not work. First time (10 Windows) I got an error message i/o failure and winload.exe, second time (8.1 Windows) a back message with 'failed to load the operating system, press CTRL + ALT + DELETE. That part a few times.
  3. OSX on FusionDrive (128 GB), Bootcamp on same drive
     Working, but limited to 128 GB for OSX and Bootcamp
  4. Make the logical Volume (fusiondrive) with 128 GB and 1 TB
     OSX works, but can not give more than 64 GB to my Bootcamp. Bootcamp to 64 GB ok.
  5. OSX on FusionDrive (128 GB), Bootcamp on FusionDrive - to SSD with Winclone
     8.1 clean Windows Installer, Sysprep. Everything looks ok in Winclone. When you try to reboot I get a message similar to "failed to load the operating system

  I would like to at least 800 GB on my Bootcamp. Does anyone know how to make this work?

  iMac late 2012, 1 TB Samsung EVO has replaced the 3 TB drive (installed to the authorized service partner Mac).

  After building the Fusion drive in step 4,

  1. the 128 GB drive was first in the volume of your CS?

  2 Let us try and correctly create the CS and see if we can make it work.

• How to replace the spaces before and after a Word with tabs using GREP or search - replace

  Here's the scenario:

  I have a paragraph with spaces (can be 1 or more) at the beginning (before the first word) and a single space after the first word (is be a number if this matter - which may be a single digit or more).

  I'm looking to replace the spaces before each paragraph with a single tab and replace one tab so of space after the first word (number). In addition, I would like to apply a paragraph style to it.

  Thank you very much in advance for anyone who can find a solution. It sounds like a solution of some sort GREP but can't nail. Thank you.

  ^(\s+)(\S+)(\s+)

  and replace with \t$2\t and define the change of setting fit your style.

• BSOD on install of Windows 7 after hard drive crash

  I have a HP Dv7 with Intel i7 and 8 GB memory. About 3 years.

  Recently, I lost my hard drive to a physical failure. I bought a 120 GB SSD as the principal and a 1 TB drive 7200 RPM as the secondary to be replaced. I ordered the HP restore kit to reinstall Windows 7, but each installation stops at "loading drivers" step and gives me a BSOD. I tried to remove the SSD drive and using only the hard drive, but the same results. Also tried to do a clean install of Windows 7 with an ISO image to a bootable USB key. The same problem. I also tried swapping the primary/secondary locations for readers.

  Nothing I have tried seems to work. I'm desperate for a solution! Why would I get a BSOD on a reinstallation of the software factory?

  I am trying install Windows 7 without SP1 to see if that works, but have no chance. What else can I try? What I have to install Windows 8 to work with the new hard drive or SSD? »

  I tried to restore 4 times (3 hours + per attempt). I tried the clean install of Windows 7 SP1 at least 10 times, each of them do not reach the exact spot. Windows won't INSTALL, so that steps can be taken?

  As I posted earlier, I had problems with installing Windows 7 on my laptop HP Pavilion Dv7 after replacing a hard drive defective. I ordered the kit of training materials ($60) and the operating system of restoration kit (essentially Windows 7 and drivers) on a 4 disc set. I paid the extra money for all accelerated for me.

  After you have installed a 120 GB SSD and the new 1 TB drive 7200 RPM, I tried to install the operating system using the DVD restore I ordered. Each installation took about 4 hours and each of the 3 times (i.e. 12 hours!) installation has failed at the end of the installation process. Then I downloaded a clean version of Windows 7 ISO and burned a bootable USB an attempt installs another 15, which also failed at the end of the installation process.

  In desperation, I contacted HP support and was informed that I had to pay for technical support. I must say that I was really disappointed by HP and HP «each incident» support I spent $59 and 3 hours talk with some idiots in the new Delhli, who accompanied me through a few tests of BIOS of base no matter what 3-year-old could have understood, I sent them a picture of the BSOD and error code, and they arrived at their 'solution' to send me my laptop to HP for them to install a new hard drive and reinstall the operating system for the pittance of $200 and 7 to 9 days!

  I refused their generous offer to relieve myself of the burden of $ 200 in my wallet and took the laptop to Fry when I bought it. After 15 minutes of discussion about my question, the tech told me that I needed to install the Intel drivers during the installation of Windows 7. He popped a USB key containing the Intel drivers, I've needed, continued with the installation of Windows 7, and I was back at home with a working machine within the hour. It cost me $35. A BARGAIN, given that HP, the company that BUILT my laptop was completely distraught about this problem and the only solution was to deprive me of my laptop for 9 days and during this time, charge me $200.

  So to all who read this, please pay NOT for the HP "per incident" support. They are slightly educated idiots who know no more about the HP product than your typical 3 yr old child. For example, they suggested that the HP laptop in my possession was "very sensitive" and I wouldn't be able to put 'any hard disk that was not exactly to the same specification as that was in it from the factory'.  Idiots.

  I you need to re - install Windows 7 on your laptop, visit the Intel website and download "floppy" (i.e. not the executable versions which self install) versions of their drivers for your laptop, load on a USB stick and when begins the installation of Windows 7 where it asks if you want to load the drivers, select the drivers on your USB key and installation will be smooth.

  Again, how is it possible that HP and their support forums are not aware of the problem or the solution? Seriously. This is probably the last HP I buy. Just exhausting and annoying to deal with this.

  Craig

  PS - My HP Pavillion DV7 is smoking quickly with the new solid-state drive and updated 7200 RPM secondary drive. * beep * thing boots like 20 seconds and Photoshop load almost INSTANTLY. Incredible.

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Most of the apps on my mac stop responding after that I do something meaningful

  My Macbook was working perfectly yesterday, but earlier today, most of my programs started to not respond, after doing something about them. For example, when I open Safari, everything is good, but when I look for something and you click on a Web page, uh oh, it no longer responds. Same thing with the terminal. Sometimes when I'm trying to type something in, it stops responding.

  I contacted Apple support and they said it was a problem with my hard drive, but I made many controls and all right. How can I fix? I'm getting more RAM soon if it would help me in any way to stop the crashes of programs?

  I use El Capitan 10.11.

  MacBook Pro (13 inch, early 2011)

  Processor: Intel Core i5 to 2.3 GHz

  Memory: 4 GB 1333 MHz DDR3

  Graphics card: Intel HD Graphics 3000 384

  I also re-installed OS X and the problem is still there, so I doubt it will be anything related to the software that I have not yet downloaded anything.

  PS I can't go into an Apple store. In addition, the problem is not terribly annoying, so if I leave it, which is bad, or is it crucial that I get it repaired?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• How can I prevent the Win7 installing display drivers just after starting?

  My main use of this particular computer is Microsoft's Flight Simulator X. It's a title 3-4 years and it works better on the 182.5 nVidia drivers than it does on the last drivers out there.

  I just got an ATI card and I'm replacing a nVidia card. I uninstalled the ATI card, used Driver Sweeper in safemode and jumped in the nVidia card. Unfortunately, Windows installs a driver, I don't want to as soon as I get in windows.

  I have disabled the Windows of any kind (temporarilly) updates, but it still happens. Searching on Google I found a solution that starts with-
  -Click Start
  -type in gpedit.msc entered press...

  Unfortunately gpedit does not seem to be on my system, so it stops there.

  I absolutely need the old version of this driver and there must be a clean install not on top of another driver so if anyone knows how to stop the auto install it please help. I spent far too much money on this sim card to be stopped by the present, and I don't want to go back to XP at this point.

  Thanks in advance,
  Rob

  Oops almost forgot I'm on Windows 7 64 bit.

  ----------------------------------------------------------------------------------------------------

  Edit - Ok in another post here to solve another problem I've seen one person say to uninstall a driver, reboot and cancell the automatic installation of the new driver...

  My problem is that I do not get the dialog box who says it's installing drivers or one that will allow me to stop the installation after I type my password and press enter (log in). After you have clicked on enter it is less than 10 seconds before a dialog box tells me that I must restart to complete the installation. Never thought that I would complain that my ' computer is too fast, LOL!

  If I uninstall the video driver, start in safe mode, run driver Sweeper to get all the bits that are missed, restart back in safe mode I can again install the new drivers (older) then in safe mode? I've never tried something install with safe mode before, so I don't know if it is still possible or recommended.

  Any ideas would be greatly appreciated,
  Rob

  Hello Samhrutha G,.

  Thank you for your response. I think that your solution would work if Windows has never had the nVidia system driver, but because he did it (from when my settings were to allow updates) install regardless of my settings in the Windows Update settings. You see, I had (temporarilly) the value of this parameter to never to let Windows download and install updates but he ignored that (I tried with your settings too).

  I think I found a solution, but I could be wrong in my understanding. This is my thoughts when you uninstall a video card driver and restart with no 3rd party drivers on your system, Windows uses its driver 'Standard VGA '. I'm not sure but I think that it is the State in which we look after using something like Driver Sweeper in safe mode. Just the driver VGA Standard, this way a clean install of 3 third-party drivers can be made.

  What I did is to use Device Manager to access my VGA card and selected the option Update my driver from a list of drivers already on my system. It gave me the choice of GTX 275 nVidia Driver installation or driver VGA Standard. I chose the standard and restarted. After the restart he tried to update that I don't want, so that's good.

  My next steps will be to start in safe mode, run Driver Sweeper to clean the remnants of the nVidia Driver, restart, leaving the sytem completely load and then reboot again. I wil then install the driver nVidia of my choice.

  If I'm right that which users are usually trying to accomplish with the method Driver Sweeper is Windows just use is driver VGA Standard then I have all good and my card will work better than my old less powerful card (which is not currently the case). I think I'm right because Windows would need some kind of driver to display anything on the screen at all which I assume is his 'Standard VGA' driver.

  Please someone correct me if I'm wrong I typed all this out in the hope of helping others with the same question.

  Thank you once again Samhrutha I thank you for taking the time to offer your help.
  Rob

• The purpose of doing a virus scan after Windows starts in safe mode?

  I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

  (1) would what type of circumstances you perform a scan antivirus in safe mode?

  (2) what are the advantages or disadvantages?

  I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

  Thank you!

  Hello

  The advantage is that some process and services are not loaded in Mode without failure there is less chance
  This malware can load and interfere with the process. The downside is the same if its best
  to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
  difficult to remove malware is detected then run in Mode safe, then in Windows.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• I replaced my netbook with a SSD HD and reinstalled Windows Starter with original OEM key. Now, he had become an evaluation version. How can I fix it.

  I replaced the HD with an SSD in my netbook.

  Due to the change of material (disk) I couldn't use recovery option.

  So, I reinstalled Windows Starter from scratch with the original OEM key (on the back of the Samsung netbook...

  After a delay of a licency says Windows is not is no longer valid (end on assessment) and I have to buy a new version.

  I've already paid for this edition of starter, so I don't want to buy any update.

  Samsung CAL not does not help me, because the licensecode is Microsoft.

  How can I fix it?

  How can I reactivatie this Starter Edition is assembled of original Key?

  have you enabled it? Probably the initial 30-day grace period expired.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

  If this does not work:

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.

  Click on the button continue, after a short time, continue button will change to a copy button.

  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

  Please indicate the version and edition of windows from your COA. do not specify the product key.

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• What should I do if I spilled liquid on my macbook, after I let it dry... I can't turn and if it is all ok forget, or should I bring it support?

  What should I do if I spilled liquid on my macbook, after I let it dry... I can't turn and if it is all ok forget, or should I bring it support?

  Happened to others? What do you recommend?

  Liquid spills are not covered by the warranty. Always have a current backup plan. How to create a clone of startup

  Try your luck when you turn it on. Soda soda is worse than water, continues to corrode.

  In general, it's a keyboard for small amounts of liquid.  In this case, you may be able to combine a wireless keyboard and the trackpad.

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• El Capitan will not install. Window disappears after pressing the button install.

  Hello world

  Looks for some install help. I try to install El Capitan for my Mac Mini. Here are some features:

  Mac Mini (mid-2011)

  OS X Yosemite 10.10.5

  Intel Core i5 2.5 GHz

  Question: El Capitan does not install anything after clicking on the button after choosing the drive. The window simply disappears and nothing happens.

  I have read all the threads to locate the file "install OS X El Capitan", but it leads to the same question.

  What other options can I here? I tried to create a new admin user to install the operating system, restarted my computer, re - download the file, etc..

  I ran out of options here. Help, please!

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Firefox will always be a way course surf the web using a Windows XP computer after that leaves Microsoft support Windows XP?

  Windows XP is still my favorite operating system, but Microsoft will give up support in the coming days. If I understand correctly, shortly after which using Windows Internet Explorer to surf the web on a computer running Windows XP (or can) make the computer vulnerable to piracy. It will be the same for the use of Mozilla Firefox on a computer that is running Windows XP?
  I think I saw an ad for Google Chrome with that they would continue to support the browser for use on a Windows XP computer. I think that Google said they would keep releasing patches to secure the Chrome. Can anyone confirm that and more importantly, is Mozilla Firefox secure? Also, should I uninstall Internet Explorer on my Windows XP computer when leaving Microsoft support?

  Note - I am posting this with a newer computer that works under Windows 7 64-bit.

  Firefox will continue to work with Windows XP. At best, in the near future, I could see the required configuration to encountered to Windows XP with Service Pack 3 (obligation is SP2 for now). Security in Firefox patches are the same, regardless of the version of Windows you are using.

  Keep in mind that without security updates, the operating system itself will be precarious. What browser and software security that you use will not change.

  Internet Explorer is a component of the system, and you should not attempt to remove it in Windows Vista and lower. From Windows 7, there's a way of kind of uninstall from the control panel.