I returned to windows 7 on my laptop Acer 5253 10 Windows and I lost my network card driver in the process.

Similar Questions

• I am running winXP home on laptop wireless via a router, and I continue to have an effect on the net.

  login procedure

  I am running winXP home on laptop wireless via a router and I continue to have an effect on the net, and a window saying I need to go through a certain procedure of connectivity in order to return on the net than what seems to come regularly and after that I went through the procedure, I'm back on the net could you please inform me how to eliminate this problem.

  Hi conorcloris,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242/en-us

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006/en-us

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• conversion of back for win 7 to win 10, don't reboot on my laptop Acer 5253 help!

  I down loaded Win 10 to see if I like it. After a week I decided it wasn't for me so I tried to re - install win 7 Home premium on my laptop Acer 5253. I apparently have not entirely down load correctly a recovery/repair disc, now cause my Acer laptop computer docalled, they said that because I was out of warranty that they couldn't or wouldn't help me and I you should not fully restart. I tried everything suggested by microsoft technical support, but the more I have is that the computer will boot up to "starting windows" and the logo of win 7 (which is different from that of the win10 logo), but then I get just a black screen with a cursor of the mouse on it. I know it is something simple to solve, but when I

  See the instructions for download and reinstall Windows 7 Home Premium:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  then

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  See also

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting.

  connection problems on hotmail through msn

  After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting

  Hello richardcatchpole,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• I just bought 14 items and must have missed something because the order only gives me downloads for Windows and I'm on Mac. I have the serial number for Windows download. How to move to Mac downloads?

  I just bought 14 items and must have missed something because the order only gives me downloads for Windows and I'm on Mac. I have the serial number for Windows download. How to move to Mac downloads?

  Hello

  Please see a product for another language or version of trading platform

  Kind regards

  Sheena

• Recently, I built a new computer (Windows) and reinstalled my copy paid Lightroom. At the moment he is at version 4.4 and said there is no new update. On my old computer, I was up to version 5.7. Why not Lightroom exceed 4.4 on my new computer?

  Recently, I built a new computer (Windows) and reinstalled my copy paid Lightroom. At the moment he is at version 4.4 and said there is no new update. On my old computer, I was up to version 5.7. Why not Lightroom exceed 4.4 on my new computer?

  Is it possible that you are using version 4 of Lightroom serial number to install on the new computer. Check in your Adobe account online and see if you also have a Lightroom update registered serial number 5.

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• HP Envy dv6 7210us laptop: network card driver

  Hello

  I just installed windows 7 on my computer and tries to get the network for this drive.

  the computer came with windows 8, however, he picked up a terrible virus and I did a reset of the system, only it kept restarting after the reset.

  I installed windows 7 on it and now I can not find a network driver that is compatible with the computer and the operating system.

  Help, please!

  Hello:

  You can use all the W7 x 64 drivers and software the dv6z-7000 except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-7000-entertainment-notebook-PC-series/5226230/model/5292555

  The driver for the specific wireless card you need is this one...

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  Ethernet (wired) is this one...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56442.exe

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• Install windows and run via an external usb drive

  I have windows7 and use laptop Dell 5110. the hard drive of the laptop does not work and that the hard drive on this laptop is good inside - you must remove the motherboard keyboard and all - it involves a lot of work to do. I'm not very good at this and would not take the risk to do this to replace the hard drive. I have the drive seagate external hard and wants to use it as the main drive and install Windows and all programs, with the USB connection. Windows 7 does not normally install on the external hard drive. y at - there no way to get around this without completely going to replace the hard drive.
  Thank you for your support.

  You can do it, but it requires that you have Windows 7 Ultimate or Enterprise or Windows 8:

  How to create a virtual hard disk:

  http://www.ZDNet.com/blog/Bott/how-to-use-a-VHD-to-dual-boot-Windows-8-on-a-Windows-7-PC/4847

  How to copy on an external hard drive:

  http://blogs.msdn.com/b/husseina/archive/2009/10/17/booting-Windows-7-or-2008-from-a-VHD-on-a-USB-drive.aspx

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• !!!!!! Help! No network card detected during the instalation ESXI 5.5 in a laptop

  Hello

  I want to get a lab and install an ISO of ESXI 5.5 image from scratch in a laptop Lenovo T430 16 GB of RAM. Everything appears normally, BOOT from CD, copying files, early and late services, appears "not found network card remember that you at least have a network card to connect to the system", there is only the choice to have an ABORTION. Any help? The card is one Intel (R) 82579LM Gigabit Network Connection.

  What is strange to me if I installed a Windows 7 and after 10 VWworkstation, I can install a 5.5.without ESXI, even ISO problem

  ANYhelp is welcome!

  Jesus

  Welcome to the community,

  Please take a look at http://www.virten.net/2013/09/esxi-5-x-installation-on-intel-nuc-fails-with-no-network-adapters/ for more information on how to customize the installation image to recognize your network card. When you install ESXi as a virtual machine in VMware Workstation, it is not the physical NETWORK adapter which is presented to the virtual machine, but a virtual NETWORK adapter for which ESXi uses built-in drivers.

  André