I was connected to WiFi, now I have problems!

Similar Questions

• I have a powermac G5 running 10.5.8 that I continued to get a screen telling me to level, which I did, then I was told that it was not compatible, and now I have nothing. How can I get Firefox I use back?

  I have a powermac G5 running 10.5.8 that I continued to get a screen telling me to level, which I did, then I was told that it was not compatible, and now I have nothing.

  How can I return to my old system or download one that will work. bold text

  You can download Firefox here 3.6.xx:

  http://www.Mozilla.org/en-us/Firefox/all-older.html

• My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

  My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

  GR

  Since they are both HP products you the best solution is to talk to them...

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I could not turn it off on m

  I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I couldn't turn it off on my computer due to the fact that it broke down.

  The serial number you have is a Volume License serial number, which works only with the specific volume license Installer. Please visit the Adobe license | Serial numbers | Orders | Accounts.

  I hope this helps.

• my laptop was a bang and now I have no operating system

  My samsung r519 laptop had a decline now its me not saying theres no operating system and by making a humming noise, I don't not a disc that people have told me I needed it will correct or it is not good now I have to buy a new

  Hello Mandypoole,

  As you physically remove the laptop there is every chance that the hard drive has been damaged. This can also be the cause of the hum, but the buzz can also be something else. Your best course of action is to take it to a repair shop for them to watch.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I was using WIA in Photoshop Elements because of problems with my scanner HP ScanJet sudden 4200C window. With the help of my scanner HP through WIA worked very well. Now I have problems analysis with either WIA or the window of the HP scanner.

  When I finally tried to solve the initial problem scanner HP in resettlement of the disk to scan, I kept getting the message that it was not compatible with Windows 95 or 98. But I have Windows XP.  So I finally downloaded and installed scanner drivers, software and upgrades on HP website. Well, the works of scanner, but now there are new problems.  1 - once the hp scanner window is displayed by clicking on import through Scanner HP, most of the menu at the top of the window items is not available. For example, I go to settings and all that is now available is to scan in color. There are 5 other options I should be able to click on, for example, resolution.  And I need that.  I thought, no problem, I'll just use WIA as before, as well as the WIA window came much faster than the HP one.  Problem 2 - in elements, I can go to WIA, but it says "NO compatible WIA devices have been detected."  That's happened?  I tried to go into Panel, scanners and cameras, add a device... but he could not find the scanner and of course, he cannot read the HP disc because of the inconsistent message of windows 95-98 (on my Windows XP computer!).  Can - I just uninstall my scanner and if I make the WIA will be able to find it after that?  I do not understand how I could use WIA and now I can't.  I know it has something to do with that I downloaded and installed at HP, but what?  I hope someone can help.  I have a huge project that I'm trying.

  Hello Hotrodgrandma,

  Thank you for your message.  It seems that when you have downloaded and installed the driver from the HP website, you cannot have downloaded and installed the updates as well.  Click HERE to open the HP website and download the appropriate files.  Below, I will give an overview of what you need to download and install in order.
  1 ScanJet 4200C/Cse/Cxi PrecisionScan LT software/driver
  2 HP PrecisionScan LT for ScanJet 4200 c Scanner update. This update allows the parser to work under Windows XP.
  3. all three updates, in no particular order.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• use lightroom 5.  photo editing and forgot to plug my external drive in lightroom.  connected drive and now only have a twirly Rainbow

  im a newer user of lightroom 5 on MAC, but have learned quite quickly.

  I've been editing a series of photos, and while it picks up today I forgot to plug my Lightroom external storage drive on my laptop.

  So without thinking, I plugged the drive in my laptop, hoping that the drive appears and synchronization.

  Right now, all I have is a twirly on-screen Rainbow.

  Don't know what to do.

  Can I close Lightroom and save all my changes?

  I have to unplug the drive and restart lightroom?

  Thank you in advance for any help, this is the first time that I made this mistake

  Even if no one answered, thanks for looking anyway.

  Problem solved.  It seems that Finder on a MAC has been frozen / broken so he did not see the drive.

  I uninstalled the external storage drive, created a folder on the desktop and exported all the pictures that I was working on since Lightroom where.

  I closed Lightroom (and upgraded to 5.5), killed the Finder and restarted my laptop.

  Inserted my external storage of Lightroom and it has been recognized, grew up in Lightroom and everything was fine.

• Items 11 was for windows pc now, I have a macbook pro

  Can I download it again for free? I have a serial number and v11 is cross-platform.  Appreciate help with this.

  Yes, there is no charge to download again.

  PES 10: 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

  EP 10: 11 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html

• Address IPCONFIG auto cannot locate my Ip address. Other computers on the WIFI at home have problems of "IP address conflict address" How can I fix

  Auto IPCONFIG can find 169. addresses. My IP BigPond do not answer to 169. I force the IP to get internet now. I'm trying to return to power enable all desktop computers 3 and 5 laptops (all windows) to use WIFI that we used to be able to 2 months ago. BigPond advise me to get in touch with Microsoft on 132058 and I can only do this Mon - Fri 9.00 - 5.00 which is extremely difficult so that an employee who works 12 hours. After hours of contact would be much more preferable. How can I have my computer 'automatically' identify my IP without forcing the numbers. When I force the IP on the other computers on the home WIFI network they can not access the internet due to a "conflict with an IP address. They should automatically be able to identify and define the same IP address as the primary computer without problem. How can I fix?

  It seems much more likely that the fault is in your TG782T on Windows.

  Either way, a 'normal' router will work with many more than 4 Ethernet ports (though most only have a maximum of 4 physical Ethernet Sockets) and more than 5 wireless connections.  It is therefore likely that your ISP has "customized" your device in a way that limits the number of connections - and it is probably this "customization" that gives you your current problems.  It will be a little difficult to do this via an Internet forum (rather than sitting in front of your computer), but it should be possible.

  Please specify the following sentence: "disconnect this computer and try a new computer is always the same problem as the gateway must always have this setting, this computer in IP."  What is "this setting of intellectual property?

  In the area of local connections > Internet protocols (TCP/IP), how is the 'work' computer configured?  Normally, it would set on "Obtain an IP address automatically."  What was the setting of 'alternative' that your ISP you are trying?

  The first thing to do is to get information on your work computer.  Follow these steps:

  1. click on start, and then type the three letters cmd in the run box, and then click OK.
  2. Enter the following command and press ENTER:
  ipconfig/all > "% UserProfile%\Desktop\ip.txt" {Enter}
  3. open the IP.txt file to your desktop
  4. copy and paste the text into your response.

  One of the lines in IP.txt will be something like the following:

  ... Default gateway. : 192.168.1.254

  This number is the IP address of your router.  Open a web browser (Firefox or Internet Explorer) and enter the IP address of your default gateway in the address box.

  At this point, it is possible that it will ask you a user name and password.  If you did not one, use admin as username and leave the password empty box.  If this does not work, there is a way around this, but it involves several phone calls from your ISP.

  Unfortunately, the only manual for the TG782 I could find is terribly incomplete. http://www.thomsonbroadbandpartner.com/GetFile.php?id=6978

  After login, you should see a page with a menu on the left (see p. 26 of the pdf above thomsonbroadbandpartner).  Click on the entry for "Home Network."  Unfortunately, the manual does not show the screen that appears when you enter this part of the configuration utility.  What you are looking for are the settings for the DHCP server on the router, which assigns IP addresses to computers connected to the router (no matter if they are connected by wire or wireless).

  Because the manual for your TG782T is not describe it, take a look at this, which is a part of the Linksys WRT54G Router configuration utility:http://cid-18b259158254905b.office.live.com/self.aspx/.Public/router%20setup.jpg

  Under the Network Configuration, the local IP address is set to 192.168.1.1.  On your router, the default value for this entry is 192.168.1.254.  Just under which are entered for "DHCP Server" "" starting IP address"and"Maximum number of DHCP users."  Here are the settings that you want to search.  The two critical parameters, as regards your current problem is are (1) the server DHCP must be "enabled" and "(2) the number of DHCP users Maximum" must be equal to or greater than the total number of computers that you want to connect (wired and wireless).

  Sorry I can't give you more specific instructions.  Usually, the user guide for the router will display all the available screens in the router configuration utility... but not this one.

• I had to do a clean install, now I have problems to register upgrade

  Due to a problem of Windows Explorer that kept crashing I had to do a clean install of my Vista Ulatimate. Now it doesn't let me save the program. I've tried doing a reinstall and that didn't stop my crashing Explorer. Forum was probably fifty solutions to this problem, which has not worked for me and Microsoft told me they didn't help me solve with out charge me, so now they're trying to me live in the purchase of a new program or the upgrade and that sucks.

  You MUST start the process after WIndows starts - do not have the DVD in the status bar when you start, but insert once started.

  To be honest, you should have settled this first thing - now, all you can do is try to uninstall SP2 and hope it works, but be prepared for a double-full installation if it does not work properly.

  http://www.winsupersite.com/article/product-review/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista

• Vista recovery file. In some ways, I put the files in there, and now I have problems. I've been able to get to where I could see the files but I don't know what those delete or move.

  If someone had a list on the files that belongs in the recovery file, that would for sure. I see some of them at the date of the file. Maybe someone can help me with that. Vista is the computer on which I work. He went down to where he would go and I restored it back then I couldn't he did it again. Thank you. Chuck

  Hello

  By "file recovery", you mean the recovery Partition?

  Who was photographed by the manufacturer of the computer's hard disk and there is nothing to do with Windows or Microsoft.

  It is general information on the recovery Partition:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To fix any problems that have occurred with the D: Partition Recovery, you need to contact the manufacturer of your computer to remove everything that was added on.

  See you soon.

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Had a virus on the computer, deleted, now I have problems with the homegroup and DSN

  Cause of my current problem:

  2 weeks ago, I found that my computer has a virus. He removed the BFE service, firewall Windows, Windows Defender, blocked my anti-virus (Trend Micro), cut other security services... he pretty well blocked, deleted or close all my computer security programs.

  I was able to fix, but my computer did not work in the same way.

  I was able to return back BFE and Windows Firewall, turn on other security services and get up my antivirus and running. 2 weeks later my antivirus deleted 9 virus and thousand and something web threats.

  Now to my current problem:

  I was able to establish the homegroup on my computer, but when I check the files that I want to share, Save custom settings, same when I go to a folder and select 'share with homegroup' manually

  When I hit Homegroup troubleshooting need to network troubleshooting and I end up getting this error "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding"

  I tried following this threat: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/erroryour-computer-appears-to-be-correctly/aeb7b5df-55ac-456e-aba3-96f9d90898d6

  Did not work. I tried reseting my router and modem but nothing. I can't first homegroup to work if I does not resolve the DNS.

  This problem is probably due to the fact that the virus tried to redirect my DSN to computer hackers, but

  I am running Windows 7 Home Premium 64-bit

  modem: Motorola MIPDSLA

  Router: Cisco Linksys E1000

  any other information needed on my computer please let me know

  Sorry for this post is really long, I tried to summarize as much as I could

  I thank all those who took the time to re-read this threat and decided to help me.

  Although there is a small chance, you may be able to fix this on a service by service method, it is may be easier (and faster) to do a clean install.

  I would also mention that if you got a virus to trend was obviously not a very good job of protecting you.  May want to rethink the installation of malicious software program.

• I've updated to Lightroom cc and now I have problems with permissions... How do I rectify this? I followed the instructions online, but I can't change the preferences folder permission to read and write.

  Help, please! I updated Lightroom CC through the creative cloud and now lightroom will not organize the citing on 3 files permissions issues. I tried to follow the instructions to manually fix the issue but I can't change my permissions on required files. IM using an iMac with OS El Capitan.

  Salvation without flinching,

  Did you apply permissions to all items included for these files to Adobe?

  Apply permissions to all items in a folder or disk

  1. Select a folder or disk, and then choose file > read

  2. click on the lock icon to unlock, then enter an administrator name and password.

  3. click on the pop-up menu Action , then choose "apply to the included items.

  and you also have to give all the permissions to the Adobe User Library folder (~ / library) as defined by miguana in the initial post.

  Reference article: 6.4 CC 2015.4/Lightroom Lightroom, Photoshop or bridge hangs or crashes at launch

  Kind regards

  Claes

• Why Bing appeared suddenly? Now I have problems.

  I use FF for a few years as my main and preferred browser. A week before, Bing appeared in the address line and I do not get the same results I used to during a search. My research give vague and irrelevant results. I want to get rid of Bing. I tried to uninstall FF and then re - install, but Bing is still there. How can I get rid of Bing?

  Hello, this looks like a problem maybe caused by adware on your pc. Please install the reset search addon - he'll come back more often customizations make these adware programs in default firefox: https://addons.mozilla.org/firefox/addon/searchreset/

  If the problem is still not resolved then go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.).
  
  also go to Control Panel / programs and remove all toolbars or potentially unwanted software from there.
  
  Finally, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software