ICONS ARE TOO BIG AFTER THE RECOVERY PROCESS

MY SYSTEM CRASHED AND I MADE THE RECOVERY DISC, EVERYTHING WORKS WELL, LIKE A PC BRAND NEW, HOWEVER, MY ICONS WHEN I'M ONLINE, ARE HUGE, I CAN NOT THE LITTLE ONES, SO I'LL HAVE DIFFICULT TO READ EMAIL, MAIL, ETC.

We have the same problem when you post in all capitals!

It makes it difficult to read and is considered as shouting.

Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

Then:

http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

Change the screen resolution

Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • The icons are too big for the screen

    Hello

    Everything on my computer screen seems too big. From the icons, texts, programs like chrome (pages are inside the window more). I do not change the display settings recently, and I did the updates. It happened suddenly, out of the blue.

    I tried to change the resolution, but it lists only two possible resolutions, 1024 x 768 and 800 x 600. Even when I change, it make no impact.

    What should I do?

    Use a monitor dell with graphics card: adapter Standard VGA Graphics chipset graph mobile/desktop Intel R (HSW) device.

    OS: Windows 7 professional, 64-bit

    Original title: everything seems too big on my computer

    The fact that you have only two resolutions would indicate that the game graphics chip driver is not properly installed.

    The Standard VGA adapter is the rescue driver Windows for what specific cannot be identified or are not available.

    Depending on the hardware of the computer go to the manufacturer's website, search for your particular system, download and install the graphics driver. The screen itself is not relevant.

  • My icons are too big for the screen. Everything on the computer is too big

    My wife was taking programs on the computer and the size of the print and everything else on the screen got bigger. I'm certainly not computer illiterate. I can't even read the e-mail as a result. Please advise as to a solution to this problem. Thank you in advance.

    Here's a simple way to solve what should work.

    1. right click on your desktop.

    2. click on properties.

    3. go to settings and find the screen resolution.

    4. move the bar and look at the picture above it.

    5. press OK when you want the settings.

  • The icons are too big

    The icons are too big for the screen. I'm unable to reduce them. Can you help me?

    You can attach a screenshot?

    • Use a type of compressed as PNG or JPG image to save the screenshot
    • Make sure you do not exceed the maximum size of 1 MB

    Try to assign layout.css.devPixelsPerPx 1.0 (default is - 1) on the topic: config page.
    If necessary adjust the value by 0.1 or 0.05 (1.1 or 0.9) until icons or text looks right.

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

    You can watch the Default FullZoom Level or NoSquint extension to define a page zoom and the size of the default font on the web pages.

  • How can I put everything back to normal size, office pic & icons are too big

    I was in my card program yesterday, when twice, shutting down the computer & I had to re - start. When I come back, everything went too big. The wallpaper is bigger & icons, Windows Live Messenger, Yahoo & even 3 broadband shows much larger than normal.  Also, I get a message saying that there is not enough room for all that appears.  I tracked everywhere to try to find how to put everything back to normal size & cannot find how.

    Hello

    I suggest you try to perform the clean boot and check if it helps:

    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • Satellite A500/A505 - some problems after the recovery process

    I recently used the my Satellite A500, A505 recovery partition to get rid of a particularly persistent virus after running several antivirus programs, all to nothing does not.

    Now the virus seems to have disappeared, but the computer doesn't seem to be in the State it was in immediately after its opening.

    Firstly, the resolution is such that the taskbar, menu start and the desktop icons are all much larger than normal.

    Secondly, it seems to be missing some graphics files enables it to play my games that I put on it from my backup (in other words, it is showing the bottom of the game screen and play music and SFX without showing the character sprites or the menu options).

    Thirdly, my Fn + F6/F7 does not allow me to adjust the brightness of the screen of the computer, the only way that I know how to adjust the brightness of a Toshiba laptop.

    EC who if anything, could I hurt in all this?
    What might be able to do to solve these problems?
    I don't have no internet right now, but I have a USB and eternal patience, so I can use another computer and transfer everything what you suggest on mine.

    Nevertheless, I prefer solutions that do not like it, if possible.

    Surely appreciated!

    To be honest I never heard of this issue.
    In my opinion you should try to make the installation of recovery one more time to check if the same problem occurs again.

    You have created recovery disks?
    If Yes use recovery disks for recovery image installation.

  • Satellite A45-S150 - black screen after the recovery process

    After problems with a virus, I ran the recovery disk and reformat the hard drive and reloaded the OS. When the process pushes me to remove the disc, it begins to restart, but only shows a black screen. I restart the process of recovery only with the same results.

    The laptop came loaded with XP, but that the recovery Application is running, it says it is loading Windows 98. Could the original recovery disc was loaded with the wrong operating system?

    What's next?

    Hey,.

    > I restart the process of recovery only with the same results.
    You can install Windows using a normal Microsoft Windows disk?
    So, you can check if the problem is related to the computer laptop or recovery disk itself.

    > it says that it is loading Windows 98
    Don t worry not about this message. As far as I know it has something to do with the software that allows you to copy the recovery image on your HARD drive. Recovery disk still contains Windows XP ;)

  • Icons are too far to the left on the allignment of monitor problem?

    The icons on the screen of the monitor are adjusted too far to the left.  If I could reach in and just move the entire screen an inch to the right, it would be good.  I asked a lot of people 'tech' and nobody seems to know how to solve this problem.  Any help would be appreciated.

    If only the icons are far to the left, you can simply drag-and - drop icons anywhere.

    If the entire screen, including the taskbar is far to the left, you can use the buttons on the monitor to adjust the size of the screen.

  • The games are too big for the screen

    I bought Mahjong, installed the drive and now when I try to play its too big to play on screen

    Here I have a couple of similar games and they are the same

    And yet, everything is normal size.its just if I want to play these games, what have I done?

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Satellite L50 - B - 1 7: my facebook photos are too big on the desktop

    Hi guys

    I have transferd facebook photo to my desktop pic, but its too big and out of the home, the amount of the fine on same computer F/B

    Thanks in advance

    D7 L50-B-1 satellite

    This is exactly the case: you have uploaded images to low resolution and now, if you increase the size of the image on the desktop, the images appear more pixilated.

    Don t be worried: there is nothing wrong with your laptop ;)

  • Satellite A200-1RK: Local Disk F is not available after the recovery process

    Can someone help me?

    I have a toshiba Satellite A200-1RK laptop.
    Usually when I click on where it says MY computer I get three things they are Vista C and dvd rw drive E and Local drive F.

    But after a virus on my laptop and the only way to get rid was a full recovery I did OK.
    But after that I noticed that the local disk F is no longer there when I click on my computer the other two are still there.

    Someone can help and can understand what I'm on everything

    Hello

    1) click on the start menu
    (2) right click on computer and click on Manage
    (3) open the category storage and click Disk Management. Here, you will find your partition (s) to your disk.
    I don't know what you have here exactly, but I guess your drive F is localized. Right-click on it, choose, make new partiton, and follow the steps. It will be published.

  • Horizon 7 Clones snapshots get trust relationship question after the recovery process

    Hello world

    I was wondering if anyone else getting an error when they recover their Instant clones related to trust now AD clones machines.

    Full message:

    The SAM database on the Windows Server doesn't have a computer account for this workstation trust relationship.

    Objects are found in AD and seem to be good. And the initial deployment of the office pool works very well. It's just when I go to recover all the jobs to fail.

    Additional information:

    1 AppVolume AppStack mounted (ver 2.11)

    1 writable AppVolume mounted no model profile

    Hey vplstingels, we are seeing this same problem. Running on 7.0.2. I decided to delete rather than recovering back them is the cause of these from SAM of the database.

  • The desktop folder icon is too big

    A 'friend' adjusted my office and now my folder icons are too big. How their return to normal?

    See if this helps the basics of the Mac: desktop computer - Apple Support

  • CAP - error! 907: given the icon is too big

    Hi all

    As the title says, I've just added a file icon my project (Eclipse-> properties of Blackberry project-> resources-> files of icons)

    The error I get is-

    Error! 907: given the icon are too big: 20751 bytes

    The size is 20 KB.

    Is there a limit on the maximum size of the file icon?

    Thank you

    Teja

    This looks like a project or installation of the BlackBerry plugin has gone corrupt. Try to add the icon itself to a new project and see if it is supported. If so, then its your project. If it isn't then there may be your workspace.

    Try the same thing in a new workspace. If it fails in the new workspace, you may need to reinstall.

  • Icons, windows and adobe acrobat toolbars are very large after the last update

    Im having a problem with the last update of acrobat pro, toolbar, windows, and icons is very big after the last update. how re its size?

    https://www.dropbox.com/sh/pbd33n1q2wirpq3/AABHjSRXo-crpYGVLaOrB2FVa

    Please check the doc: Hi DPI, support Retina display. Acrobat, Reader

Maybe you are looking for