ID. Frame.dll at startup

Similar Questions

• Apoint.exe could not load lanucher DLLs at startup

  Hi all

  any ideas how to fix this error.
  Is it a virus.
  Apoint.exe could not load lanucher DLLs at startup
  T

  Hi all

  any ideas how to fix this error.

  Is it a virus.

  Apoint.exe could not load lanucher DLLs at startup

  T

  Alps pointing device driver...

  If it is a laptop, get the latest touchpad driver and install it.

• mcastmib32.dll on startup and cannot find the cause!

  My HP Windows XP based computer is coming up with the error message "the application or DLL is not a valid windows image. Please check this against your installation diskette. »

  It started all of a sudden and I have run several antivirus programs, but cannot get rid of it at startup!

  Googling this file name, it appears that it is a kind of malware, so depending on what "several antivirus programs", you have run, I'm sure you do:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  The scans by operating clean, if you still have the problem, we can solve it.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

• Error loading c:\program files\arcadeweb\arcadeweb32.dll at startup

  Original title: error loading c:\program files\arcadeweb\arcadeweb32.dll

  I get the error message (error loading c:\program files\arcadeweb\arcadeweb32.dll) I click ok and it goes away, but returns the next time I bring my computer.  Place UN til yesterday, I received the message for rundll.  What should I do?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: If you have ArcadeWeb program installed on the computer, and then reinstall that program and check.

  Step 2: Alternatively, you can try to perform the clean boot on the computer to resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Blue error screen advapi32.dll on startup

  Restarted the laptop to finish installing a new update for itunes and other apple products. Has been sent to a blue screen at startup which said:

  STOP: c0000135 {Unable to locate component}
  This application has failed to start because ADVAPI32.dll is not found. Reinstalling the application may fix this problem.
  Have tried rebooting in safe mode options, tried to fix the problem and I tried to debug only to be sent back to this screen each time.
  Do not have a boot drive for the Vista operating system.
  How can I fix?

  Hi Emily,.

  Thanks for posting the question in the Microsoft Community!

  Method 1:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows using the command line in options for system recovery.

  Method 2:

  I suggest you try to do a restore from WinRE (Windows Recovery Environment) system and check if it helps.

  To perform the WinRE you must insert the installation disc:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Let us know if it helps.

• Dll on startup file startup problem

  I'm under 64-bit Windows 7 Home Premium on a laptop ASUS. When the computer starts, I get an error message saying: "there was a problem starting c:\users\...\ASUS\wbttywwl.dll. The specified file is not found. "What did do this file and how can I solve this problem? Thank you!

  Hello
  You did changes to the computer before the show?
  A DLL is a library that contains code and data that can be used by several programs at the same time.
  Method 1: Scan of SFC and see if that helps.
  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833
  Method 2: Put the computer to boot and see if that helps.
  A clean boot to test if any element of service or third party application startup is causing this issue.
  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• RTHDCPL. EXE - illegal system DLL on startup - HHCTRL. OCX

  DLL error! Help me?
  That's what I got after a recent windows update has taken place and I had just rebooted my laptop,

  «Application popup: RTHDCPL.» EXE - DLL system repositioning unauthorized: the user32.dll system DLL has been moved in memory. The application will not work correctly. The move took place because the DLL C:\WINDOWS\system32\HHCTRL. OCX occupied an address box reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL. »

  What in the world could possibly occur between the time an update? I'm wiped out.

  I guess maybe it's to my speakers because I google this RTHDCPL. EXE... and he came up with the name of the audio device I have. ANY HELP AT ALL would be appreciated as I don't have any time to waste, I need this laptop for work.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  It s on the same theme

• LabVIEW locks on DLLs at startup of c# openfiledialog.showdialog)

  I'm pretty new to .net connectivity, but I have a dll with a class that when built (using the constructor of node) running my windows form.

  public class RunForm
  {
  public RunForm()
  {
  Application.Run (new Form1());
  }
  }

  The form opens and it works fine until the form called openfiledialog.showdialog ().  The file dialog box never opens and it crashes labview.  Just to be clear, when I build this in a windows application, there is no problem.  I don't know what I'm missing.

  Don't know what exactly it is you're doing (creating a library of classes to run a Windows form of LabVIEW seems a bit complicated for me), but generally in such cases, the problem is that the VI is not configured to run in the UI thread. Open the properties of the VI and in the execution of the section the value "System of execution preferred" 'User Interface '.

• file error missing a3d.dll at startup

  start my computer, I get the messages,
  "a required DevCon32.dll is not found. Make sure that the file is in the correct directory.
  who is little followed
  "the file on windows a3d.dll cabinet driver is necessary. type the path where the file is located, and then click ok.
  I found out it's an audio file that is missing and that is the reason why I can not all the sounds from my computer.
  I have a creative soundblaster and I looked on the site creative for a solutuion. all the suggestions that have been made, either do not work or I have no idea what it means. I uninstalled and deleted all the programs of creation of my pc and tried to reinstall the drivers. None of which work. I wanted to find a way to let my computer expert access to solve the problem for me, but it is just as difficult. any advice?

  How did you "sort the missing a3d.dll?

  Have you downloaded the correct driver for your sound card?  If so, where did you download it?

  You have not yet identified the model of your sound card or the make and model of your computer.

  See http://dll-repair-tools.com/dll-files/computer-music-composition-with-devcon32dll -

  In simple terms, devcon32.dll contains program code used by the computer to communicate with your audio card SoundbBlaster. The dll is associated with creative products, but is essentially a Windows system file.

  The Microsoft version of devcon32.dll can be in C:\Windows\system32\dllcache.  You can try this copy to C:\Windows\system32... but this file may not be the "necessary devcon32.dll" which is probably among the driver download package.

• Error function not valid advapi32.dll on startup?

  asking again as my first accepts match failed.

  XP SP3 IE8 4 gig, amd phenom II 840 RAM

  No error of harware in Device Manager.

  I ran security scans, ad scans and antivrus sweeps, nothing helps.

  Reinstalled SP3 I found the only copy of functioning of the ADVAPI32. DLL in the subdirectory of MS and may not perform repair or reinstall from the disc with Service Pack 3 installed. This eliminated the problem and speeded up things a little for about 12 hours and then restart in the morning, everything went hiccups again.

  the biggest annoyance is that almost every program or file, I used to open immediately now takes more than 15 seconds.

  I have cleared the cache, temp files, uninstall files, and listen to the system with the cleaning disk, defragmentation, scandisk and other similar things. other missalligned files is nothing major to come several times.

  im hoping to spare me the gig to reinstall if possible.

  any help would be appreciated.

  Thanks in advance.

  Marking of one (or more) of my answers as RESPONSE will officially close your thread.

• After you have installed the latest version of iTunes, get the error message about AVFoundationCF.dll at startup to the top

  I've been downloding the new version of itunes and my computer froze and I stopped him by holding button turn off and when I go on the computer the next time he says this "C:\Program Files\Apple\Apple Support\AVFoundationCF.dll of the application also does not Tun on Windowns or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  * original title - help me please: (*)

  Hello

  ·                         Follow the information from apple to the link below

  read this information on avfoundationcf.dll

  http://discussions.Apple.com/message.jspa?MessageID=12932050#12932050

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  and also try itunes discussions

  http://discussions.Apple.com/category.jspa?categoryID=149

• Dll problem startup files

  I get the following error message every time I start my Windows 7 PC.

  

  I can not find the WindowsMsg folder in the location. What should be the next step?

  Thank you and best regards,

  Crily

  This type of message is often the result of a question about the malicious software that has been removed by your anti-virus startup program, or sometimes the result of a partially uninstalled program.  In both cases, you must delete the wrong place to start.

  There are various utilities for managing startup items.  This is a good option.

  WhatInStartup
  http://www.NirSoft.NET/utils/what_run_in_startup.html

• run the dll on startup error

  Hello

  I get this message box every time I start my computer.

  There was a problem starting C:\PROGRA~3\8E675BB8.cpp

  at the top of the box is a runDLL.

  I am also unable to install the latest update of Windows, and I get the failure message. They can be connected, but my main question is how to fix the error of .cpp on start up.

  My computer is running Win 7 Ultimate service pack 1.

  Thank you very much for the help.

  Ammar

  Hello

  Google has no information on this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• c:\windows\system32\nvcpl.dll at startup error.

  I get a c:\windows\system32\nvcpl.dll on Win 7 start up. How can I remove it please?

  Please advise?
   
  Original title: c:\windows\system32\nvcpl.dll error

  Hello Clive,.

  Thanks for choosing Microsoft Community.

  What is the complete error message you get?

  C:\windows\system32\nvcpl.dll corresponds to the NVIDIA drivers or any NVIDIA product. While the research with the Dll file that I fell that this could occur when drivers are not updated or if they are damaged.

  You can try the following methods and check if it works:

  Method 1: turn on the computer in start state clean and check to start the giving questions.
  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135     
  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:
  You can uninstall the card readers NVIDIA graphics and the software of the system and then download the driver and see if the problem is resolved.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

   
  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• dll on startup error up to... c:\programData\displaypolicy\notifier.dll

  I get this error at the beginning upward.  How can I fix the problem?

  Hello

  1. you did it before the issue of any material changes or software?
  2. What is the exact error message?

  Step 1: Start your system in safe mode. Check if you are facing the similar question in safe mode.
  To start your computer in safe mode through the article mentioned below.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If safe mode works fine, start your system in clean boot mode. Check if you are facing the similar question in this mode as well.
  Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.