IdeaPad U410 works do not in Normal Mode

Similar Questions

• Yahoo Messenger opens in safe mode and not in normal mode

  August 10, my flash has crashed when I was with google chrome, then all of a sudden, yahoo Messenger is wobbly. Then thought that yahoo needed to update Messenger, so I checked and of course, there was a newer version. I downloaded and that one point until yesterday if my computer went to sleep while I was connected to yahoo messenger or if I signed up I could not sign in and the purple area remains impossible to click anywhere or even move desktop. Could not only to return with a restart of the computer.  Now it doesn't open in safe mode and not in normal mode.

  I have been in contact with the support of Yahoo messenger and they gave me things to try as Messenger clear cache via the prompt commands, uninstall and reinstallation in Mode safe mode with networking, reset of IE9, check the connection, etc... Yesterday I did all these steps and this time I saw came error window "missing windows component, flash.ocx". I went to Flash via the Control Panel, and of course, my ActiveX went awol. Then I got using IE9.  Instant yahoo Messenger WORKS FINALLY! And I got the smiley face on the login window animation, BUT I can't use it in Mode without failure.  Login window won't be developed in Normal mode.  Is there something I have to toggle to open in Normal Mode?  I have this blue and yellow shield on it. I did the thing of Mr. fixit and there he had set for a few minutes, then she came back.  In the said detailed report something hidden icon got corrupted and something to rebuild the icon cache...
  -Using Windows 7 Home Premium 64-bit

  Hello

  1 are. what fixit you referring?

  2. do you get an error message when you run Yahoo messenger in normal mode?

  Method 1:

  Right click on the Yahoo messenger and select run as administrator.

  Method 2:

  Perform a clean boot and check if you are able to launch Yahoo messenger in normal mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  To rebuild the icon cache, refer to this link.

  Forum FAQ:How to rebuild the icon cache

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• LabVIEW program works in highlight mode and does not not in normal mode

  Hi all

  I want to explain my program first,

  I wrote a program where try to establish communication between Labview and the microcontroller. I am trying to select the com serial port automatically by this program. I joined VI which shows the logic that I used. LabVIEW checks each port working on the computer, writing of visa "and expected to read the '." The fi ' is recived then the loop ends here and shows the good port where the microcontroller is connected. Otherwsie, he continues to look for... each logic works I tried to check in any case, it is work, but it does highlight mode. When I try to run in normal mode, the loop is not able to properly read the microcontroller running permanently. I checked for the output baud rate, no bytes ect., tried somany ways... but it still does not work.

  I checked with all the delays, but I could not understand the problem. I don't have much expirence with Labview... Can someone please help me solve this problem?

  Thank you

  Dembélé

  I see a lot of possible race conditions in your code and no time between write 's' and read the port.

  Also follow these steps:

  

  Do this way:

  

  You may need to reverse your logic too.

  

• Windows Vista works in safe mode but not in normal mode. Desktop freezes and cannot go to the Task Manager

  My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.

  Hello

  • All changes made on your computer prior to this question?
  • You have an antivirus installed on your computer?

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Also try running a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning
  Anthony.

• DAQmx write (digital) works in mode "highlight execution", and not in normal mode

  Hello!

  I would like to create a simple vi (it will work as a Subvi watchdog in a project) to send TTL 5V 0V 3 seconds 3 seconds, by performing an iteration in a loop.

  Use a card PCI-6703 to that effect (beside that I use for the generation of analog static waveform on several stations). I also have a DAQ USB6212 card, and I have test my digital output with this USB card digital input via MAX.

  The strange thing is that when I run my code in mode "highlight execution", I get what I want: 5V 3 seconds, 3 seconds, 0V, iteration.

  When I try to start it in 'normal' mode, I only see the 5V constantly from the output through my digital entry in MAX.

  I know I'm doing something wrong, but no idea what...

  Please find attached the vi simple.

  Thanks in advance!

  Kind regards

  Your overall loop time is 3 seconds (3000 MS of waiting).  You have a 3 second delay between writing the real and write the value false.  But as soon as the false is written, the loop reminds immediately (the second set of 3 waiting operates in parallel to the writing-Delay-Write sequence) so the real gets drafted immediately after the fake.  It will be just a blip.  So that if you run in the execution of climax, the code goes pretty slowly so that you see the Boolean value False as LabVIEW takes his time data flowing drawing wires.

  Put a delay function after your DAQmx write wrong, as well.

• Desktop won't load do not in normal mode

  Windows 7

  There are weeks that I posted a question about the inability of my Samsung laptop to load the office in Normal Mode.

  I have received many useful suggestions, for which I am extremely grateful, but nothing has worked.  The laptop comes with Windows 7 pre-installed, so I did not drive.  I don't have the foresight to create an ERD, and although I thought that I had set up the restore points, Windows might find no.

  CHKDSK reveals no problem, any more than Norton 360, Registry Reviver, renewing security or Driver Reviver.  ReImage trying to analysis of malware but gets stuck on one of the Norton 360 program *.dat files regularly. SCANNOW tells me I've corrupted or help the missing files that it cannot repair or replace, which is not optimal.

  I don't see any alternative but to back up the entire computer and re-install Windows and bought a Seagate external drive for this.  Do I need to buy additional software for a successful migration and restore.

  Are there tips to achieve this?  What guarantee is there only to restore the contents of the computer I do not re - import the problem?

  Other brilliant ideas out there?

  I don't see any alternative but to back up the entire computer and reinstall Windows

  -> Not "re-install" Windows. You must perform a destructive factory restore, using the hidden disk partition.

  Do I need to buy additional software for a successful migration and restore.

  ->, You can't "migrate" settings of your software and system. You will need to reinstall everything after the factory restore.

  Are there tips to achieve this?

  > I would use robocopy.exe to save profile on an external drive records. He will take care of the visible and hidden folders and does not further access problems. Post again if you need instructions.

  What guarantee is there only to restore the contents of the computer I do not re - import the problem?

  -> So that you restore your files from data only, there is no risk of re - import problem.

• my monitor is broken on my laptop and I connected an additional monitor. How can I get the extra monitor to work while not in safe mode?

  Someone hit my monitor and broke. I connected a regular monitor, but will only work in safe mode. How can I disable the broken screen so that I can use my laptop?

  Hi, try the normal mod F1, F4 or F5 Fn (function) button for the track changes and change the default monitor.

  Safe mode, select monitors in Control Panel.

• won't start do not in normal mode

  Computer does not start in "normal" mode.

  Make this info below; do not take into account info from SM to go in the link (this is simply a guide for you)

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Table of contents > Vista

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     Uncheck the box Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  Mick Murphy - Microsoft partner

• Computer automatically starts in safe mode and not in normal mode

  Original title:

  My system is Windows Vista, which is stuck in safe mode.  I tried several to restart in normal mode to have the computer open again in safe mode.  Need help to get out of safe mode and return to normal mode.  Thanks for any help!

  Hello

  1 you get an error message when you start the computer, which leads it in safe mode?
  2. are you aware of any changes made to the computer, before the show?
  Follow these steps and check.
  a. click on Start and then run.
  b. type msconfig in the Open box and click Enter.
  c. click on the Startup tab.
  d. uncheck the box for safe mode.
  e. click on apply and OK.
  I hope this helps.

• Desktop not appearing is not in normal mode

  My windows Vista is running in SafeMode with networking, but in normal mode, after that I entered the password for my account, the office displays ever upward, I have just a blank (black) screen for hours. I tried to restore the system at various points in the past, but the problem remains the same. Also, until the computer has crashed, I have a blue screen for 2 seconds and then restarted the computer and the desktop never appeared in normal mode since then. Any suggestions?

  Thank you.

  Hello

  Do you have scanned for viruses in your system? If yes what virus has been detected in your system?

  Check the below registry in safe mode entry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\shell

  Check the value data for shell. Should be EXPLORED. EXE only. If it is changed, then remove the malicious content & keep only EXPLORER. EXE.

  Hope this will help you.

• can connect to internet in safe mode but not in normal mode

  Hi all... I use windwos 7 ultimate...
  My problem is I can connect to the internet in safe mode, but unfortunately I can't connect to internet in normal mode...

  I have try several step to address this problem, but it seems is no good at all, and for your information guys, I format my laptop 4 times.

  and I update my network driver.

  I use kapersky 7 and malwarebytes even they cannot detect virus or trojan etc which are harmful to my laptop...

  Please help me guys

  Try this:
  -Click Start
  -Type the word msconfig in the search box and press enter
  -Uncheck the box each tick on the Startup tab.
  -Click the Services tab, then check the box hides the Microsoft services.
  -Uncheck the box each remaining tick.
  -Reboot the machine.
  -If this problem, restore the ticks in groups of 8 until you find the culprit.

  ATTENTION: If you connect to the Internet without a router, then you MUST make sure that your Windows Firewall is active. If it is inactive then you will expose the machine to the pirates.

• internal WiFi works in safe mode but not in normal mode.

  I have very hard to pass the data on the net - when restarting, wifi is on but does not work and showing off shortly. My phone via bluetooth connection seemed to work for a while but today although it shows not connected no pass data even after two reboots. Start in safe mode, however, shows wifi on and it works! (that's how I'm connected right now). So it must be a software originally this problem - but how do I tell me what it is? This has happened for a long time - well before the upgrade to El Capitan.

  Place your cursor on the WiFi icon - press Option and then click on it

  Run the Diagnostics wireless

• my computer stop in safe mode but not in normal mode

  When I try to log on my computer from the start menu it just hags and never shuts down.

  When that I disconnect in safemode, I close.

  Can someone help me solve this problem.

  Curtis_883

  Hi Curtis,.

  1 did you changes to the computer before the show?

  2. What antivirus do you use?

  I suggest you follow these methods and check.

  Method 1: Disconnect all the external devices connected to the computer and check if you are able to stop.

  If you are able to stop the external device connected to the computer is causing problems so connect only one device at a time and check the functionality. If you find the device that is causing issues update its device drivers on the manufacturer's Web site.

  If the method above does not work, proceed to the next method.

  Method 2: while the computer works fine in safe mode, perform the clean boot. This will eliminate software conflicts, help us identify the problem application.

  To do this, follow the steps in this link: http://support.microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   
  See also: turn off a computer: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

  I hope this helps!

• Apple TV Airplay of 4 works is not in Sleep Mode

  Hi all

  I have a problem with my new ATV4 and the use of airtime. If I turn on the ATV with the included remote control, I have no problem using airtime and everything works as it should. However, if I put my ATV in standby mode after a few minutes the Airplay icon will disappear and I am not able to start it by sending the contents of airtime to it (btw the remote for iOS devices app is also not able to connect in standby mode and run it). Now, I've already owned an ATV2 and with this device I've ever had any of the problems noted above. I tried many things such as giving the ATV a fixed IP address, deactivation and reactivation Airplay, restart and finally completely restore the device. After that nothing helps I contacted Apple for support and after several calls which included to restore the device again once they are now trying to tell me that my problem is
  not a problem at all, but it is intentioned behavior of the device. Please can someone of you confirm that you are able to connect to your ATV4 also during the night before and wake up, it? With this information, I would then contact support again.

  I already thank you in advance and best regards

  Oliver

  Yes, I am able to launch an event Apple AirPlay TV 4 sleeping. In my particular case, I have a mixed network (ethernet and wifi) between the two devices.