IdeaPad Y560p blue screen, power of the core problem.

Similar Questions

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• How can I re - boot my laptop windows xp from a blue screen I get the message of UNMOUNTABLE BOOT VOLUME

  I recently got a blue screen that appears on my computer windows xp laptop which has a message of UNMOUNTABLE BOOT VOLUME and I was wondering how I can re - start the laptop to return to normality for the use that I'll have to use my windows 7 but I need to use my windows xp for various General things and would like to have help on how can I get rid of this? whenever I'm using one of safe mode, it does not access this section is

  Kind regards

  Julie stearn

  Hello

  1 how long have you been faced with this problem?
  2 have you made changes on the computer before this problem?
  3. What is the exact error message on blue screen?

  The following article might be useful: Unmountable Boot Volume

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• Stuck on the keys saying - hibernation.tapped blue screen power on and power off

  Came home from work, powered to the top of my machine, there is a blue screen saying - put into hibernation. I filmed all the keys, use the power button to turn on/off. Help! PLEASE, I BEG YOU!

  Hi @Bobbybobbyh,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post and wanted to help. I understand that you've got a blue screen on startup of the laptop.

  Please follow this document to troubleshoot issues:

  HP PC - Error Messages on a blue screen during start-up or start-up (Windows 10, 8, 7)

  Let me know how it goes.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• otebook goes to power blue screen asking for the password

  Help, please! I have a HP 210-1150nr which took a clean mind. It begins at a blue screen invites me for a walk or an administrator password. After you have entered the wrong password, it reads system disabled with this code-64466112 - I hope that there is help out there for this. I have a paper due.

  Hello:

  Try this code...

  71544134

• Blue screen, lines on the screen on the start screen

  During the game Fallout New Vegas, the computer froze. I was forced to turn off the power switch. When I rebooted it was blue in dotted lines that go up and down the screen vertically then it bluescreened. The blue screen says that 'nvlddkm.sys' was responsible for which is something to do with my graphics card driver.

  I tried to boot into safe mode and uninstall the drivers and the device manager card and reinstalled everything but it kept happening.

  System information:
  Dell Dimension 9200,
  Vista 32-bit,
  NVIDIA 7900gs,
  Intel Core 2 CPU 2.13 GHz 2.13 GHz,
  2 GB of Ram

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Windows 7 memory 64-bit dump blue screen while playing the Star craft 2 and Battlefield 3 in and out of sleep.

  Original title: 64-bit Windows 7 memory dump blue screen

  Specifications of the computer

  CPU: Zambezi FX-4100 3.6 GHz (Turbo 3.8 GHz) AMD Socket AM3 + 95W Quad-Core Desktop Processor FD4100WMGUSBX

  Motherboard: ASUS M5A99X EVO AM3 + AMD 990 X SATA 6 Gb/s USB 3.0 ATX AMD motherboard with UEFI BIOS
  GPU: 01 G-P3-1460-KR of EVGA, GeForce GTX 560 (Fermi) 1 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card
  RAM: G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1066 (PC3 8500) desktop memory model F3-8500CL7D-8GBRL
  PS: CORSAIR Builder Series CX500 V2 500W ATX12V v2.3 80 MORE certified Active PFC Power Supply
  SSD: OCZ Solid 3 VTX3-25SAT3 - 60 G 2.5 "SATA III 60 GB MLC "
  HARD disk: SAMSUNG Spinpoint F3 HD103SJ 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "drive hard internal-Bare drive
  OS: 64 - bit Windows 7 Home Premium
  It's a new generation and I have all updated drivers, bios, and Windows updates. I set my virtual memory for two hard drives (min: 8000/Max: 24000). I run PrecisionX in the background with stock settings, and Asus II HAVE suite and my CPU is overclocked to 3.8 (recommended turbo). I run CNettoyez on a regular basis to solve registry problems.
  I had my new blue screen of generation of dumps from memory, about four times since I built it. It comes into play, i.e. of Starcraft 2 and Battlefield 3, and once when he came out of sleep. I ran a memory test, and he says that he has no problem. Suggestions or anything like that, I need to test again?
  On a side note: don't suck my HDD or is it decent? 1 TB, 3 Gb/s, 32 MB cache. My OS is on my SSD as well as Torchlight 2, and the rest of my stuff on my disk HARD of Starcraft 2 and Battlefield 3, media and stuff.

  Thanks for your help. I think that I thought about it. The "timing" on my ram is disabled, so I manually set in the BIOS and see what happens.

  Also, it would cause W7 to freeze coming out of sleep? I had this recent problem where when my computer out of sleep and it wouldn't wake up and my CPU LED should blink slowly. After turned it off, I will re-start and it would be nice, but now it is that whenever I put it in sleep mode.

• Blue screen, but can the safe boot mode

  I get the following error

  

  He then gets to my home screen, just before going to my office and then I get the blue screen:

  I am able to boot in safe mode.  I also tried boot of the last good configuration but still knowing the blue screen.

  Please help because I am stuck how to proceed!

  Hello

  Check your cables to the disk hard (on both ends) - remove and replace - do

  not only it to be tight (of course all power first deleting).

  --------------------------------------------------------------------------------------------------------

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  https://msdn.Microsoft.com/en-us/library/ff559023%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 x 64 Pro blue screen intermittently on the new system

  I recently created a workstation and noticed that, sometimes, we get a blue screen.  Error message:

  Windows has recovered from an unexpected shutdown
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: 50
  BCP1: FFFFF940C27298A0
  BCP2: 0000000000000000
  BCP3: FFFFF9600007263C
  BCP4: 0000000000000005
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\052214-12136-01.dmp
  C:\Users\Samuel\AppData\Local\Temp\WER-18018-0.SysData.XML

  Details of the system:

  Windows 7 Professional SP1
  Processor: Intel Core i5-4570 CPU @ 3.20 GHz
  RAM installed: 8.00 GB
  System type: 64-bit Operating System
  Main logic board: ASUS B85M-E/CSM
  DIMM: Patriot Viper DDR3 PC3-12800 16 MHz 8 GB
  Storage: SSD Samsung 120GB SATA 840EVO
  Storage controller: Intel 8 series/C220 SATA AHCI Driver 12.0.0.1082
  Monitors: 3 x LG 27EA33V-B
  Embedded video: Intel HD Graphics 4600, pilot 9.18.10.3186
  Network: 1GbE Realtek, pilot 7.67.1226.2012

  There IE 11.0.9600.17107, but I do not normally use, I use rather Firefox 29.0.1, but only for e-mail and 4 websites; I don't do any surfing.

  I have installed MS Security Essentials and set automatic updates.  IE has old what only once, with 11.0.8 update.  Windows has already updated several times.

  I hope I can join the 2 files related error referred to in the above message.  I put this in the performance and Maintenance category as that seemed the closest to this question.  Can someone please help me to get because of the deep on this problem?

  Thank you

  TD

  P.S. I don't seen any possibility to attach files, it might go to the private message.

  Yes, thank you!

  The attached file of the DMP is the verification of bug PAGE_FAULT_IN_NONPAGED_AREA (50) .

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  ------------------------

  1. uninstall Asus PC Probe as well as any other Asus bloatware as soon as POSSIBLE.

  2 run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• blue screen error and the memory of dumping

  Dear all,

  Beyond 20 days before my knees worked well, with any problem.

  OS: win 7 home.

  recently I updated all the patches update.that time Windows first problem started in the MSE.

  Error: Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  Due to this blocking of the system frequently. some time system starts window in a few second, or after the windows login began with a few min.and then memory dump and the blocking of the system and blue sceen dump.

  while I removed the MSE and also checked, after that also are having problems.

  Help reslove the issue.

  Please find the shared memory dump

  https://SkyDrive.live.com/#CID=F1D72CACC8DEB263&ID=F1D72CACC8DEB263%21126

  As well as the problems of now some think like this as follows,

  A fatal hardware error occurred.

  Reported by component: Processor Core

  Source of the error: Machine Check Exception

  Error type: internal Timer error

  Processor ID: 4

  View details of this entry contains more information.

  Hi Er.Nirmal,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.