Idle screen goes blank and unable to wake up
when im playing music I usually put my screensaver for about 15 minutes. It works great when I use it for windows or my images, but recently on a screen saver program I bought online which worked well for a while, then that seems to me now have problems.it starts well on command but in about 15 minutes my computer enters an empty state without displaying anything and my music stops playing then I touch any key and it goes upwards, so what do you think could be my problem?
Thanks, Mcpseudo
Hello Mcpseudo, Your computer may go into a hibernation or a "standby". Below, I've added a link which I hope will help you. Please let us know status. Sleep and extended: Thank you James Tags: Windows Hello.. IM sharir of Malaysia... I am currently running windows vista Home premium sp2... with processor Intel (r) Core (TM) 2 Duo CPU P7450 @2. 13 GHz... 4.00 GB of RAM... my system is 32 bit OS type... My problem is when im turn on my computer laptop everything seems fine but the problem is that after I log on my screen vacuum become and only my cursor appear... after 1 minute of waiting my windows reappear as usual... only this problem occurs whenever I connect... so what should I do... ? In addition, I have scan my computer with Kaspersky Internet Security 2011... Hello aqua9teen1, Go to control panel, click Action Center. See if there are errors listed there. You may need to expand to see all questions. Then I'd suggest that you update your video drivers. If you have a computer that you purchased in a retail store, then you can go to the computer manufacturer and see if they have updated drivers. Or you can also go to the manufacturer of the adapter driver updates and videos. Please answer back with an update. Sincerely, Marilyn Satellite C screen goes blank and only the visible mouse pointer Hello My laptop Windows 8 is a couple of months Today, when I try to start it shows the splash screen and then the screen turns black with only the pointer of the mouse showing. I can move the pointer on the screen, but windows does not load. What happens if you go to the BIOS by pressing F2 while turning on the laptop? In which case it's just a software related issue, you should be possible to repair the system using the Toshiba HDD recovery or the Toshiba recovery disc. The comments appreciated. (Dell LCD) screen goes blank when I connect. Requires power to the power on and off screen, at least 15 to 20 times before picture stays on. Any suggestions? No to the problem site so don't have the model numbers. Dell computer and about 8 years. Looks like your monitor is having problems sync-ing for the resolution settings that you have defined for your monitor. When you get your screen is displayed, right-click on an empty area of your desktop-> properties-> (tab) settings. Then, in the 'Screen Resolution' area, try to move the cursor to the end of 'Less' and click 'apply '. It will then try to change to this new resolution. If your screen is empty for now, just wait about 30 seconds and it will return to the previous resolution (which can mean that you need to power cycle your monitor you have done to get it back)-otherwise accept the settings if your display looks OK. Try to find a solution that works with your monitor. It is also possible that your monitor is going bad. HTH, JW wanted m6 sleekbook: How can I stop my laptop screen goes blank. My laptop screen keeps going blank. and sometimes I'm in the middle of something. the laptop keeps runing like nothing happened. Hello @Iggy6, It seems that you have a unwanted material. You can contact HP telephone Support, for additional options. Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. I hope this helps. Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you! Kind regards! Crash - screen goes blank white, or clear & requires power to restart. Original title : Windows Vista crashes? I have a Dell Inspiron 1501 running Vista with SP2, IE9, on a local network using a D-Link wireless router. Crash - screen goes blank white, or clear & requires power to restart. Not particularly at some point, everything seems to happen. The msconfig poster system log event viewer critical errors at the time of the accident - the event log source indicates "plateau of WLAN, & R300? Also just today a new - source of journal of the events 'DistributedCOM' & 'Application Hang. So, whats happening & what to do? Hello · You get the error message? · Were there recent changes made on the computer before the show? Follow these methods and check if that helps: Method 1: Follow these steps and check if that helps. Step 1: I suggest to start the computer in Safe Mode and check if the problem persists. http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode Step 2: You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135/en-us Note: Don't forget to start your machine in normal mode by following step 7 of the link. Method 2: Follow the form of measures troubleshooting article and check if that helps. Pick up the pieces after a computer crash http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash Method 3: I suggest to optimize windows and check if the problem still persists. http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance Method 4: I also suggest you to improve the graphics and motherboard chipset and drivers on the manufacturer's Web site and check if it helps: http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly Screen goes black and white after the computer starts. Original title: after starting Windows 7 everything is OK for a minute, then suddemly the screen is white and white and I Pascal t do anything or get into programs. After the start of Windows 7, everything is OK for a minute or two, then all of a sudden the screen goes white and blank and I can't move forward. If I disconnect and try again. Don't get into F8 either. Hi Eunice, Pilots, conflicts with other programs, malicious software and memory can cause starting problems. 1. did you of recent changes on the computer before this problem? 2. What is the brand and model of the computer? Method 2: Using the last good known Configuration Method 3 Startup Repair: frequently asked questions Hope this information helps. Answer the post with an up-to-date issue report to help you further. No changes but my screen goes black and computer stops on its own This has just begun. Screen goes black and the computer shuts down. Is also off sometimes when I try to wake him up. Hello Mary LouJoseph,. Click the link for the who might help with your problem of black screen. Let us know if that helps. Marilyn Portege M400 is frozen, screen goes black and the fan speed increases when moved Can someone help me please? I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition. Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS? Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again. Hello Respect137, welcome. Ryan Thieman have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do? have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do? =============================== Might be interesting to try to reduce your graphics How to put in back of graphics hardware acceleration If they improve the question, you should look for the If you do not know the make and model of your Also you can find info on your video by driver Expand "Graphics cards" and right click You should find the make and model of your If the driver on the Web site is no longer Once installed the new video driver... you Good luck... I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD. Hi cgrosenick, -What software changes you did on the computer before the show? Follow these steps: Method 1: Start your computer in last known good configuration mode. For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality Method 2: Follow the steps in this article: Computer stops responding with a black screen when you start Windows XP When using gpu high performance my laptop screen goes black and white HP Touchsmart TM2-1010ea Windows 7 64 bit recently updated to AVG, nothing of other news. When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color. Hello mcbethtings: Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer. Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw. (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp. Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition, Take a look at this: http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html Hope this helps Post back if necessary __________________________________________________________ If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly. screen goes black and I hear 3 beeps slow cpu. A few minutes after turning on the power button on the computer, my screen goes black and I hear 3 beeps slow cpu. It makes me have to hold in the power button to turn off the computer and restart. This happens as regularly after I've been on the computer for awhile. What is causing the black screen and beeps? Hello You normally get beeps and it does not start. You will need to go to your computer manufacturer's website and find out what BIOS you have in your computer model. Then check in these links 'beep' error codes know what hardware has problems. http://www.pchell.com/hardware/beepcodes.shtml http://www.computerhope.com/beep.htm See you soon. When a Labview built executable tries to create / edit the .ini file, located in the same directory as the .exe and when all this is happening in "C:\Program Files", Windows does not have this privilege for a standard user and labview does not create My windows xp computer has no sound! Help, please. My computer recently crashed and we had to install a new hardrive. Now, I can't get my sound to work. Even when I plug a speaker, windows says I have no speakers connected. Help, please! 2007WFP, driver Windows 7 64 bit? I recently replaced my desktop computer Dell XPS 410 with a powerful Dell 17R 5737 laptop connected to many devices via a Dell docking station. I'm hoping to use a Dell 2007WFP Flat Panel Monitor (connected to the old XPS410 origin) as my monitor for CUCM for Multistream version requirement? Is anyone able to tell me the version CUCM Multistream requirement work? I'm hoping to get it deployed to a CUCM 10.5.2 cluster, but I'm not sure if it requires version 11, I've not had much luck finding an answer... Ok.. I bought a laptop with Vista pre installed Sony. Then, I bought a copy of Win 7 Upgrade to upgrade, I did.Shortly after, my laptop broke and I got a new laptop through my insurance company which had Win 7 pre installed. I just got a new desktop Similar Questions
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
You see the BIOS screen and all the BIOS settings?
Could connect you external monitor to the laptop just to check the 2nd display?
Have you checked one of the procedures mentioned?
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Method 1:
We will first of all disconnect all external devices except the keyboard and mouse, if necessary and see if the problem is resolved.
If the problem persists, you can start the computer to the last good known Configuration and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/using-last-Knofwn-good-configuration
If the problem persists, I suggest to perform a startup repair and check if that helps.
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
This is whyis my screen black when I start Windows 7?
Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I don't know what is causing this problem but would be
suspicious, it is related to a corrupted or obsolete
video driver.
Hardware acceleration instructions
in the following article.
http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
(scroll down to: "If you are using Windows 2000 or XP")
site Web of MFG. your video card
a updated driver Win XP compatible video. Or...
If your computer is a laptop... Search support
site of the manufacturer of your computer.
Video adapter, see the documentation that
supplied with the computer.
go to Device Manager: you can launch
By clicking Device Manager on... Start/run and
type or copy / paste:
devmgmt.msc
And then press ENTER.
the name of your graphics... then
choose... Properties / tab pilot... FYI.
adapter display as well as the version of the driver.
current than you run...
Download and install it. In addition, installation
instructions that should be followed closely
should be available on the support site.
can restore your full acceleration.Maybe you are looking for