If the value by default, not to lose information as reboot pc to factory settings?

Similar Questions

• See the value of zero instead of "the value entered does not match the format of the field [].

  I use the simplified notation filed to perform subtraction on a budget form.

  They all have an excellent work and have no problem display a value of zero when it's a simple subtraction (value1-value2).

  However, on my last field I want to take the total income and subtract what I spent (approximately 40 fields) and get a balance zero.

  When I try to do it I get this warning "the value entered does not match the format of the field [].

  The calculation works fine and displays the correct value for all the foregoing ".» 01 "and displays negative numbers. 01 "and underneath as well (if I go on the budget), she just may not show a zero, which is my goal for this equal to zero each month.

  I tried to watch if the forms and have not found an answer that works even for my situation.

  
  Happy to post the form here, just do not know how to do it.

  Thanks in advance,

  The custom calculation script may be something like the following:

  Get the value of field of income, as a number

  var v1 = + getField("Income").value;

  Set up an array of domain names

  var aFieldsToSubtract =]

  "ThithesB,"

  "TailleB,"

  "EFundB,"

  "MortgageB,"

  "HomeItemsB,"

  "HomeRepairsB,"

  "ElecticB,"

  "GasB.

  "WaterB."

  "SewerB,"

  "TrashB,"

  "PhoneB."

  "InternetB."

  "AutoInsB,"

  "UmbrellaB,"

  "IdentityB,"

  "CosmeticsB,"

  "ToiletriesB,"

  "PocketEBB,"

  "PocketCBB,"

  "GiftsB,"

  "HouseSuppliesB,"

  "PersonalOtherB,"

  "PersonalOther2B,"

  "GroceriesB,"

  "RestaurantsB,"

  "ClothingB,"

  "CarGasB,"

  "CarRepairsB,"

  "CarOtherB,"

  "MedicalBillsB,"

  "MedicalOtherB,"

  "EntertainmentB,"

  "VacationB,"

  "DebtCarB,"

  "DebtStudentLoan1B,"

  "DebtStudentLoan2B,"

  "DebtStudentLoan3B,"

  "DebtCreditB,"

  "DebtOther1B,"

  'DebtOther2B '.

  ];

  Subtract the values in field

  for (var i = 0; i)< afieldstosubtract.length,="" i="" +="1)">

  v1-= + getField(aFieldsToSubtract[i]).value;

  }

  Set this field value by rounding the result to the nearest

  Event.Value = util.printf ("%.2f", v1);

  Do not think of this as a band-aid, think the correct way to perform the calculation, because it is. Note that "Thithes" may be a spelling error.

• Error message - the value entered does not match the Format of the field

  I get an error message in Adobe Pro x: "the value entered does not match the format of the field [JF13].

  I have JF13 scheduled as follows:

  Calculate tab:

  If (Number (this.getField("ck4").value) > 0) this.getField("JF13").value = Number (this.getField("FL019").value); else this.getField("JF13").value = "";

  It is programmed in this way, so if the user checks the checkbox in front of the field, only then will JF13 fills a value, which pulls of FL019. I also value parameters 'number' because the data to display in the form of a dollar amount $xxx.xx.

  FL019 is a hidden field on the form which takes an amount of a central computer and its settings can also be programmed to 'Number':

  I get four popup windows with the above mentioned error message, and the only way to make the stop message is to remove the «number» field format. However, when this is done, if a number any ending in a zero is entered, it cuts the zero. This is not acceptable either.

  Is there some kind of script that I could add or otherwise to prevent the error message and the cutting out of the zero on JF13?

  I'm not very proficient with javascript, any help would be appreciated!

  Just include the two quotes, not the comment brackets.

• "The value entered does not Format of the field.

  If something similar has been posted, I apologize! I tried to look for it and has not been able to find the answer.

  I have a form to determine the potential savings, if a customer makes our products to a competing product. Our sales staff filling in many areas that allow us to determine the annual cost that the customer currently committed, as well as the potential annual costs associated with our product. At the bottom of the page, using a simple calculation JS, it determines annual dollar savings by changing brands.

  I would also like to include the annual savings as a percentage of current costs, but for some reason, I cannot get the script to work. The error message that appears indicates: "the value entered does not match the format of the field [annual percentage savings]."

  Now, the two fields referenced in my script are formatted in dollars, so I don't know if this makes a difference or not. My script is below.

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;
  var y = this.getField("Cost_Per_Year_Current").value;
  F.value = Event.Value / y.value;

  If (y.value < f.value) event.value = ";

  Given the percentage is not strictly necessary, but it adds to the form, so that any help would be appreciated.

  Thank you!

  Post edited by: MelissaZoller (format)

  I would use:

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;

  var y = this.getField("Cost_Per_Year_Current").value;

  If (y<= 0)="" event.value=''>

  else {}

  Event.Value = f / y;
  If (y< f)="" event.value=''>
  }

  In this way there is no division by zero or a negative number.

• My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx

  My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx

  See the manufacturer's web page for detailed instructions on 'Factory Restore'.

• How autoinitialize controls to the value by default to run?

  Hi all

  I am trying to initialize the default values to controls just after the run button is hit. This only works if the control is loaded with default values before running. I am a frame and any kind of help will be really appreciated.

  Your VI is stupid. You must understand the data flow. Not sure if the control is going to write to the indicator, first, or if the case statement will run. What finally will you do with your program. I hope that you have some kind of while loop (do NOT use the continuous run button). Then the method would be just outside the loop and don't run once - no need an instruction box. You could also place inside the first State of a state machine.

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• Reg: Retrieve the value by default-

  Hi Experts,
  
  Need help with writing a query.
  Table "Tab_2" a column 'c3' which checks its value from the values in the column "c1" "tab_1" and therefore from value of the column "c2".
  But if a value of c3 is not present in the column tab_1 "c1", "c2" value "DX" should by default.
  
  Please find below the scripts Create & Insert:

  create table tab_1(
      c1 varchar2(200Char),
      c2 varchar2(200Char)
  ); 
  
  create table tab_2(
      c3 varchar2(200Char),
      c4 varchar2(200Char)
  ); 
  
  insert into tab_1 values('104,113,146,165','1x');
  insert into tab_1 values('204,213,246,265','2x');
  insert into tab_1 values('304,313,346,365','3x');
  insert into tab_1 values('default','dx');
  commit;
  
  insert into tab_2 values('146',null);
  insert into tab_2 values('265',null);
  insert into tab_2 values('333',null);
  commit;

  Here's the query where I'm stuck:

  SQL> with x1 as
    2  (
    3      select
    4          REGEXP_SUBSTR(c1,'[^,]+',1,level) id1,
    5          c2
    6      from tab_1
    7          connect by level <= length(translate(c1,'~0123456789','~'))+1
    8          and prior c1 = c1
    9          and prior sys_guid() is not null
   10          and c1 != 'default'
   11  )
   12  select
   13      id1, c2, c3
   14  from x1 RIGHT OUTER JOIN tab_2
   15      on (x1.id1 = tab_2.c3);
  
  ID1        C2         C3
  ---------- ---------- ----------
  146        1x         146
  265        2x         265
                        333

  Please let me know if any clarification is needed.
  
  -Nordine

  Another way... without the generation of line

  SQL>  select t2.c3,nvl(t1.c2,tx.c2) c2
    2   from tab_2 t2
    3     left outer join
    4       tab_1 t1
    5      on (','||t1.c1||',' like '%,'||t2.c3||',%')
    6     join
    7      (select c2 from tab_1 where c1 = 'default')  tx
    8      on(1=1);
  
  C3         C2
  ---------- ----------
  146        1x
  265        2x
  333        dx
  

• Programmatically trigger a structure of the event with the value (signaling) is not responding

  Hey, in my attached program I check if the two steps of translation are in a specific position. If Yes, I want my code to execute a sequence of movements. If this isn't the case, I'm asking the user if he wants contributed from this position anyway. It has three options: Yes, go to load (the specific position) and cancel. If he hits Yes, I am using a property of signal value which should update the controls Boolean true, allowing the sequence. Cancellation and work "to load" perfectly fine, but 'Yes' does not work. I think I need a structure of the event to ahndle the value of the Boolean control 'x' change event, however, the addition of this structure of the event for some reason any even do not allow me to click on the Start button of the procedure.
  Thanks for any help in advance.
  Doug

  Really, you should look into using a State Machine.  You should have really not what happens inside a structure of the event.

  In addition, I would like to use a shift register to store this value instead of a front panel control.

• The value of default setting in organization, self recording reqest

  Hello
  
  When the end-user function triggers a request for free registration, it goes to the Manager's approval. And the Manager must update this request with the value of the organization manually. Is it possible to set a value by default to this?
  
  Please let me know.

  You must create a pre-populate for this adapter.

  Use the code to achieve the same below.

  import java.io.Serializable;
  Import oracle.iam.request.exception.RequestServiceException;
  Import oracle.iam.request.plugins.PrePopulationAdapter;
  Import oracle.iam.request.vo.RequestData;

  / public class PrepopulateRequesterLocation implements PrePopulationAdapter
  {
  prepopulate (RequestData requestData) serializable public throws RequestServiceException
  {
  return (Serializable) "Xellerate users."
  }
  }

• The value entered does not match the value in the field

  I have a simple form on the page, a field callculates a percentage based on the values entered in 2 other fields, works very well, but then all the entries on the form generates this message "the entered value does not match the value in the field".

  Also, you can remove a tab stop of the fields?

  Just happened again.

• What SYS tables (not seen) contains the value NULL spec /not/ column definition?

  What SYS (or tables) store the value of a spec /not/ NULL columns? (It doesn't seem to be COL$)
  
  NOTE: This is NOT a trick question - although it seems to be.
  
  Test configuration:

  BANNER
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  Test configuration:
  1. a table is created by SCOTT in the SCOTT schema with a NULLABLE column.
  
  2. a primary key constraint is added using only the NULLABLE column
  
  3. Requests for information on USER_TAB_COLS, ALL_TAB_COLS, DBA_TAB_COLS and SYS. COL$ see NOT NULL for the column NULLABLE
  as necessary for a primary key constraint. Views derive their data from the column of $ NULL the sys. Table of $ COL
  using

  'DECODE (SIGN (c.null$), -1, 'D', 0, 'Y', 'N'),

  and the table of $ COL shows a numerical value of '0' before you add the primary key and a value of "1" later.
  
  4. a query on the DDL metadata table shows the specification for column NULLABLE of origin involved.
  
  Question - where this original specification NULLABLE is stored?
  
  This question is based on a question asked by another user in this thread
  Columns becoming nullable after a fall of primary key?
  
  I created the following specially for that matter test case

  -- scott ensures table does not exist
  DROP TABLE tbl_test CASCADE CONSTRAINTS;
  
  -- scott creates a table
  CREATE TABLE tbl_test ( col_1 NUMBER,
  col_2 NUMBER NOT NULL);
  
  -- scott queries to check the the column nullable status
  SELECT table_name, column_name, nullable 
  FROM user_tab_cols
  WHERE table_name = 'TBL_TEST';
  
  -- TABLE_NAME | COLUMN_NAME | NULLABLE
  -- TBL_TEST   | COL_1       | Y 
  -- TBL_TEST   | COL_2       | N 
  
  -- Scott addes a primary key constraint using only the nullable column
  ALTER TABLE tbl_test ADD CONSTRAINT tbl_test_pk PRIMARY KEY(col_1);
  
  -- scott queries to check the the column nullable status
  SELECT table_name, column_name, nullable 
  FROM user_tab_cols
  WHERE table_name = 'TBL_TEST';
  
  TABLE_NAME,COLUMN_NAME,NULLABLE
  TBL_TEST,COL_1,N
  TBL_TEST,COL_2,N
  
  -- scott queries to get the table DDL
  select dbms_metadata.get_ddl('TABLE', 'TBL_TEST', 'SCOTT') FROM DUAL;
  
  DBMS_METADATA.GET_DDL('TABLE','TBL_TEST','SCOTT')
  
    CREATE TABLE "SCOTT"."TBL_TEST" 
     (     "COL_1" NUMBER,                   <------ where is this NULLABLE spec stored? 
       "COL_2" NUMBER NOT NULL ENABLE, 
        CONSTRAINT "TBL_TEST_PK" PRIMARY KEY ("COL_1")
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS NOCOMPRESS LOGGING
    TABLESPACE "USERS"  ENABLE
     ) SEGMENT CREATION DEFERRED 
    PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    TABLESPACE "USERS" 

  The DOF shows that Oracle keeps the original spec NULLABLE for the column and uses it to generate the DDL orginal, even if there is a primary key on the table and the system views (and COL$) show the column non NULLABLE.
  
  So where is the original information NULLABLE actually stored?

  rp0428 wrote:
  What SYS (or tables) store the value of a spec /not/ NULL columns? (It doesn't seem to be COL$)

  I think that it becomes a bit messy depending on order of activity:

  You can see Col. .null$ is set to a non-zero when the desrcibe command displays the column as not null, but it can happen for two reasons:
  (a) user sets the column as not null - in which case you get a line in cdef$ with type # = 7
  (b) the user adds a primary key to table - in which case you get a line in cdef$ with type # = 2

  If you declare null AND add a primary key, you get two lines - that's why it is possible for Oracle to determine if he should remove the flag not null when you remove the primary key and also allows dbms_metadata show the create statement of table without a NOT NULL even when describe it the watch with a NOT NULL - dbms_metadata can respond to the presence of the type # = 2 and absence of the type # = 7.

  Concerning
  Jonathan Lewis

  By the way: by a strange coincidence, it seems to me answering the previous post, three days before it was asked: http://jonathanlewis.wordpress.com/2012/04/19/drop-constraint/#comment-46140 (on the doubts, this isn't - it answers a different question on the removal of constraints).

  Published by: Jonathan Lewis April 23, 2012 11:07

• InputText DataBound is showing the value but does not display inputtext contour

  Hello everyone,
  
  I am facing a problem when working with Oracle ADF. Here's the usecase for this problem.
  
  1 > I have created a simple bpel webservice that returns data from database
  2 > then created the datacontrol therefor in my adf application
  3 > once I dragged and spent attributes return webservice as "FirstName" and "LastName", etc on a page like jsff datacontrol
  inputText.Removed xml links unnecessary and kept as simple as:
  
  < af:inputText value = "#{bindings." FirstName.inputValue}"id ="it1.
  label = "name *" >
  But the problem is when I run the application, the Web service is called, also return values, but the inputText contour is not there. The values will appear as an outputText.
  
  I have this connection, I should mention that I'm using Windows XP 2002 professional version SP3 and JDeveloper is 11.1.1.3.0.
  
  I tried many things but could not obtain the success.
  
  Any solution to this problem will be highly appreciated. Thanks in advance.
  
  Please let me know in the case of any information on this.
  
  Kind regards
  Ayan

  Hello

  This is because Web Services are not editable, but rather ask you to explicitly call a method. To change this behavior, in the data control panel, select the node of the collection that contains the attributes that you have created the form of. Us ethe mouse right button and choose "EditDefinition. Select attributes and open the property inspector. In the property inspector, find "isUpdateable" and assign the value true to the attribute.

  Save the changes and update the Panel (refresh icon) DataControl. The entry field makes now editable

  Frank

• AF:inputListOfValues except the values that are not defined in LOV

  Hello
  
  I have a requirement where the user can select a value in the given list and if the desired value is not available,
  He can type a new value.
  
  Currently I use af:inputListOfValues and it tries to validate the new value with the list of values, he gives
  a mistake. True = immediate adjustment will not solve the problem.
  
  Is their all component which can solve the purpose. If not, how can I do af:inputListOfValues to accept a new
  a value that is not in lov.
  
  Thank you
  Amit

  Have you tried to delete f: validator in the component?
  Look here Re: inputLOV - disable autocommit

• Can not use F8 to bring my laptop to factory settings

  Hello

  I tried last night and when I tried to do the recovery through F8, I got the message:

  "The recovery of the operating system is impossible! Folder of disk recovery of hard drive on the second disc of the first hard drive not found. There is no valid hard drive on this computer disk recovery environment.

  I was completely baffled, I guess that it meant the "HDD Recovery" folder in drive E partitioned. But I in no way changed or changed something on this issue.

  Help, please.

  The only other option that I seem to have found this forum is to create a recovery disk hard drive from toshiba software provided on the laptop, although I'm not sure how it works.

  Thanks a lot if anyone can help, my laptop works really slow and I think that I have something wrong on it without knowing.

  JAde

  Hi Jade

  You are right. Cannot find this folder HDDRecovery and recovery procedure cannot start.
  This folder is still available on the second partition?
  Have you changed anything with the partition?
  Have you can be removed from this folder on the external HARD drive and he settled on second partition?

  One last thing: you created restore media recommended by Toshiba recall?