If you provided apple headphones with the phone, it is still under the first year warranty as well?

Similar Questions

• How can you check if you have a problem with the ghost attack

  How can you check if you have a problem with the ghost attack.

  My ISP (Virgin) sent me a letter saying I could have an attack on my apps by the phantom virus.

  How is this true and what can do

  The XcodeGhost malware affects the apps, mainly Chinese, created using a red version of Xcode.  It is not a 'virus '.  (Look at the difference between computer viruses and malware).  Remove the Apple listed here and get updated with the latest versions of the App Store.

• What happens when you reinstal XP OS with the cd that takes me to service pack 2 and I'm at service pack 3

  I bought TurboTax and downloaded, but can I have downloaded previously because I was unable to install due to the previous installation.  After that 2 hours of phone support with TurboTax including screenshare, they stated that the problem lies in the registry. It was damaged and I had to reinstall my OS.

  What happens when you reinstal XP OS with the cd that takes me to service pack 2 and I'm at SP3?

  I finally found my OS reinstall CD, but it's waaaay above my comfort level... what I do now.

  Frankly, if TurboTax is causing this much trouble, I would use another company as the income tax act.

  Of course, you can reinstall Windows. It's a shame, if that's the only way to solve this problem. :-(
  For later use, it is sometimes necessary to download the installation file, physically disconnect from the Internet, set up a clean boot (using msconfig startup diagnosis), reboot and THEN install the large program (and then undo the clean boot, reboot and re-connect to the Internet).

• My University provides all students with the cloud of Adobe for their PC. I downloaded and exchanged a code for this, but it only gave me the trial versions of each product. How can I get full versions, since I have already apparently purchased m

  My University provides all students with the cloud of Adobe for their PC. I downloaded and exchanged a code for this, but it only gave me the trial versions of each product. How can I get full versions, since I already seemingly bought my designated code?

  I recommend you to contact our customer service for more assistance. Contact the customer service

  I wrote you a personal message, please check.

  Kind regards

  Bani

• Pencil of Apple works with the other iPads, or iPad pro?

  Pencil DDoes Apple works with the other iPads, or iPad pro?

  It works with the Pro

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• you receive an update with the 80243004 code error

  whenever I'm trying to update windows, you receive an error with the code 80243004.plz to help to get rid of this problem.
  My operating system is windows vista.

  Hello

  1. What are the updates do not install?

  2 did you change on your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I suggest to perform the clean boot, try to installed updates and control.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• Cannot communicate with the first DNS Server (169.126.63.1)

  Hello
  I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

  Here is my information

  Hello

  1. have you done any software or hardware changes to your computer recently?

  To work with this issue, I would say that you try the methods below to resolve this issue.

  Method 1:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2:

  
  Step 1:

  Let us reset TCP/IP and check.

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Step 2.

  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in the installation - basic configurationcategory.
  3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
  4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click ' Save Settings '.

  Step 3.

  1. click Startand then clickControl Panel.
  2. go in network and sharing Centerand then click onchange adapter settings.
  3. right click on Local area connectionand selectProperties.
  4 Select Internet Protocol Version 6 , and then clickProperties.
  5. click on get automatically a DNS server address, then pressOk.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also visit these links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Hope the information is useful.

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• Good afternoon, buy online lightroom, and I was charged with the first tranche and not yet count on the version full, what can I do?

  Good afternoon, buy online lightroom, and I was charged with the first tranche and not yet count on the version full, what can I do?

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  SAMT

  Removal of watermark Adobe Premiere elements 14 test of the project file... Open the project file of 14 trials in 14 items purchased and then first Expert rendered workspaceTimeline Menu/delete the files. Then restore the timeline content.

  You can not remove the watermark from Adobe to an export of the trial even after you bought the product.

  Some of us have found that just opening the project of tryout in removes it from Premiere Elements purchased the Adobe watermark. Determine the way that works for you.

  Please let us know if everything above worked for you.

  Thank you.

  RTA

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now I'm putting the button in Photo Shop (banner), I have pull down on file/pl

  Message "Hi, I'm rookiee and I just started with the first steps of creating a Web site. the katies-coffee-building file is on my desk and uplouded in the library. That has worked well. Now, I'm putting the button in Photo Shop (banner) in. I pull down on the file Photo Shop button instead and try to select the Banner.psd file. Unfortunately all of the (active) folder is not accessible to all. One is not visibel. Please - need some help here. Thank you.

  @Ach ja, meine Muttersprache ist Deutsch

  You must use the file > Place Photoshop button (Cmd / Ctrl + B).