Illustrator 5.5 - not enough memory (I have 12 GB)

Similar Questions

• Adobe Illustrator CC 2015 not enough memory error (vivid RAM)

  Hello world

  I use Adobe Illustrator CC 2015. I opened the file and I was working, when I decided to save my documents I got this error message. Someone who knows? How can I solve this problem? Thank you

  

  quit out of any other open application to see if you can save your document.

  How much RAM do you have? What else is open?

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g meory and with 3.6 ghz cpu

  I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?

  How much memory you allocate to Photoshop in the preferences?

  Terri

• not enough memory to download email, have removed many of the emails, emptied the trash, sent files help!

  It keeps giving me the message that it can not download my emails because there is not enough memory. I deleted more except the ones I really want to keep. I deleted trash, sent, what we can do. Except keep towards the top with download them every day. I use my Ipad for most. Or how can I get them to download on their own. I go to 'new' and scroll down to my email address to get new emails.

  I do not know how to compact files

  So I hope you read the article I linked to.

• record to the DSP not enough memory

  Hello illustrators

  Im trying to save as a psd file from illustrator to imoprt it in photshop and go from there

  I did over 100 layers and when I try to record as keep 300 DPI and the layers thus given an option in the dialog box

  I get the message not enough memory to save the file.why t - he not save? my laptop has enough memory to another 4 pcs.

  Thank you.

  Illustrator is a 32-bit application, until CS6 hits the streets. This means that it can only acess about 3 GB of RAM in it any time.

  Try breaking the file have in two different files and then recombine them into Photoshop.

• Cannot complete the preview. There is not enough memory. ID = - 108

  We run CS5.

  One of our customers sent us a file they would like printed.  The file is 1 MB in size and format PDF - nothing unusual about any of this.  As usual, I saved the file and tried to open it in Illustrator to put up a test for our client, and check and make sure the file is print-ready.  I received the error message: "cannot complete preview.  There is not enough memory. ID = - 108".  I press OK and it opens an empty file with some benchmarks of this crop.

  I tried to find a solution online, but all who have this problem seems to have virtually no RAM.  I am currently running on a computer brand new with Windows 7, 16 GB of RAM and Intel Core i7 processor.  I didn't think my RAM or cache have been the problem, but just to be safe, I turned off the computer, let it rest for a few minutes and it starts again.  The same problem.

  I am able to open the file in Photoshop and Acrobat - but even when I save the file in a lower resolution and turn it into a jpeg file, it will not always be open.  I get the same error.

  I need to be able to work with this file.  How can I solve this?

  Thank you!

  Josh,

  What happens if you create a new document and then try file > place the awkward file in it?

• I can't open attachments generated in Excel or Word. Get an error there is not enough memory or disk space.

  MIcrosoft Excel cannot open or save documents more because there is not enough memory or disk space.
  To make more memory available, close workbooks or programs you no longer need.
  To free disk space, delete files that you no longer have need of the disc you save to.

  I have 4.75 TB of disk space available. I tried to close open programs and I can't always open attachments.

  I did a search on google and found some info that seems to suggest that it is a question of MS Excel /Word.
  Read the info on this link:

  • http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-Excel/Microsoft-Excel-cannot-open-or-save-any-more/961a153e-6c68-4b22-b896-94601a28d7e2?auth=1

  Two comments Anula D'Souza and Gus cops offer different solutions, so try both.

• I just noticed that at the bottom of the content library, it no longer displays "new playlist" that does not mean that I did not enough memory?

  When the new playlist is more to show what this means that there not enough memory left.  My hp desktop computer said I have only 931 GB left.

  The new playlist option is always available under the file menu or by using the CTRL + N keyboard shortcut do not know why the button was taken away in the last update of iTunes.

  

  You can also click anywhere on the bar of the left hand under your existing reading list if there is space, and you will see the option for the new playlist.

  I hope this helps

• Not enough memory

  I installed Skype, talked with people normally, but now I can't. I had to move my mouse around the Skype to make it visible and when I clicked on it somewhere that the error would pop up - 'not enough memory is available to process this command. " I hope you guys could help me

  You won't have much fun with the latest versions of Skype on your computer Windows XP obsolete, especially with only 502 MB RAM installed. The problem is with the graphic resources of handling.

  You can try to disable the display of animated emoticons.

  Open tools-> Options-> appearance IM. Uncheck the option: "show animated emoticons.

  If that still does not help, then uninstall the currently installed version of Skype and install the old version 7.5:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-7-6-crashes-on-startup/m-p/4031560#M35324...

• Tecra M9: not enough memory to run

  Hello

  I have a problem with an application that freezes with messagebox not "enough memory for the operation".
  I repeat, the problem on 7 different model laptop Tecra M9 with configuration: 1024 + 1024 MB RAM with Nvidia NVS130M.

  I tried to change the virtual with ratio 1.5 * ram, 2 * ram memory... and even without virtual memory... every time the same result, when the memory used by file (visible in the Manager of tasks bargraph) occupies about 1.30 GB, the message box appears an application stopped.
  I did a disk defragmentation, checked the Ram, tried the 3 G option in boot.ini, no way.

  Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  I don't think it is the right solution for 'downgrade' the size of Ram, if someone already has this kind of problem?

  Thank you in advance

  Hello

  > Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  Hmmm, check if you can run Notepad with another RAM module removed.
  I'm not quite sure but it is possible to m the error could be related to a dysfunction of the RAM.

• TCP IP not enough memory

  I do tcp ip asks the customer side my executable (not in development mode I test my development mode my client application does not show enough memory but in application .exe it shows not enough memory very soon). Is there a solution to this i have also added late next to Scripture. one more thing my usuall data packet size is 200 to 300 bytes. and a few times I got a big one given to b received as 589513793 bytes.

  Yet one thing my executable perform well on desktop rather than laptop and win xp as win 7.

  Thank you for the time and help

  concerning

  Why don't you use a timeout on the TCP, playback function? Chances are that you lose your framing and playback four bytes could be the data packet, depending on how things are running hight. Try to set all the timers TCP-1.

• Not enough memory is available to complete this operation

  Hi I have a problem with reading the data of Access database. If I want to analyze a product these datas on 6 months, for example, I got the message error "not enough memory is available to complete this operation"

  The line of code that makes this error is

  "aValues = RecordSet.GetRows (-1, 0, aColumnNames).

  I have 1 GB of RAM on my PC but I also tried on PC with 2 GB of RAM it does not help.

  Is this a problem with the Microsoft MDAC? I work with Win XP SP3 and MDAC 2.81 SP1.

  I have no idea more wa could be the reason...

  Someone has an idea or the same problem?

  Best regards

  Hi Suttema,

  I would like to try a request for Recordset buffered, instead of asking all records at once.  See if this example helps.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Can not open opening Adobe Photo DeLuxe 4.0 said not enough memory RAM

  Original title: opening Adobe Photo DeLuxe 4.0

  Does not open, says not enough memory RAM. I have 6 GB of RAM!

  Hello

  ·        What operating system is installed on your computer?

  ·        You did changes to the computer before the show?

  ·        What is the full error message that you receive?

  Try it out below mentioned suggestions and check if this may help:

  Method 1: Change the memory allocation for PhotoDeluxe Business Edition:

  a. start PhotoDeluxe Business Edition.

  b. Choose file > Preferences > discs to work.

  (c) in the use of physical memory section, change the used by PhotoDeluxe set to 75%, and then click

  d. OK.

  e. restart PhotoDeluxe Business Edition.

  Method 2: Rebuild and resize the Windows swap file:

  a. close all applications.

  b. right-click on my computer and choose Properties from the context menu.

  c. click on the performance tab, and then click virtual memory.

  d. Select the option 'Let Me specify my own virtual memory settings'.

  e. set the Minimum and Maximum virtual memory to a value equal to twice the amount of

  your computer's installed RAM, but it is not greater than 64 MB. For example, if you have 16 MB of RAM, the value

  the Minimum values and Maximum to 32 MB. If you have 48 MB of RAM, set the Minimum and

  A maximum of 64 MB. (Do not include any RAM for a RAM, such as Connectix RAM expansion utility

  Doubler).

  f. click OK, then click Yes in the dialog box confirm virtual memory settings.

  g. click close in the System Properties dialog box.

  h. click Yes in the dialog to change system settings to restart the computer.

  Contact the Adobe Photo Deluxe forum to get help.

  http://forums.Adobe.com/thread/360663