Illustrator color shows in the black color picker if is not

Similar Questions

• Paid inDesign but shows that the CC Evaluation Version and will not validate

  First of all, this is the THIRD time, it happens to me. It happened every single time, when a client needed urgent work that I couldn't deliver. Pay for a subscription system that is actually harming my business is simply UNACCEPTABLE.

  That being said, here's the problem:

  . launch of creative cloud

  . InDesign appears as paid and bought, as it is

  . Click identification. It is paid for "trial has expired".

  . window validation

  . "validate your product...". "then closes

  . opens again. then a similar endless loop

  I tried to remove opm.db several times. running Adobe cleaner, re-install CC... didn't work!

  Last moments where he worked by uninstalling CC and ID completely and reinstall. Because of the hours I have a slow connection.

  Finally, I resorted to this "solution" this time again, but nothing helped. I have now lost a whole day of work. Customer expects his work tomorrow morning. "I had problems with my software" is NOT an acceptable excuse.

  Hello

  The problem you mentioned above occurs because corrupt license on the computer of the user file or can be due to problem of account.

  Please try the steps T/s listed on the following link...

  Troubleshooting of Activation creative cloud (solved 99% of the questions)

  If it still not working please contact Adobe support for account related issues. Contact the customer service

• Color picker error: "could not complete your request because the program error.

  IM using CC2015 on an iMac El Capitan. I get the error "Could not complete your request because of the error of the program" what colors for dropper or picking tool.

  Thanks for responding, I have the latest version on a new iMac. I am

  convinced that it is a software bug. I solved the problem by erasing all

  My predefined tools. Adobe needs to solve this problem, he has apparently been

  around since at least 2003.

  Wednesday, December 2, 2015, Akash Sharma [email protected]>

• Designjet C1633b: Test Page shows only the black bars

  I followed the instructions of Bob and actually got my Designjet wake up!  I have his parallel cable connected to a USB adapter and programmed to the USB001 virtual port in my computer of latest windows 7-64 bit.  I use the driver for the HP Designjet 600 (E/a0), which has always worked well on my old xp 32-bit windows computer pro.  Plotter responds to the command "print test page" but shows solid black bars instead of text.  Suggestions anyone?

  (I paid $5500 for this beautiful machine and it works like new.  I refuse to throw in the landfill.  My deskjet 882c original still works perfectly, despite all the improvements of windows over the past 30 years.  If they are unwilling to keep their drivers, HP must indicate their tracers have limited life no matter how much they cost.)

  I'm no computer expert, but I solved my problem getting my Designjet c1633b to print designs new autocad via my 64-bit computer.  All I had to do what trace my drawings to pdf files.  I was then able to print the PDF on my HP Designjet 24 years, as if it were brand new.  I had a little problem at the beginning: my designs were narrowed and margins have been oversized so the scale of the printed image was off.  I solved that by defining the pdf print command to "full size".

  Sorry HP, but as long as this beautiful machine continues to run, I'll continue to use it.

• Satellite A660 boots up to the black screen with blinking cursor not upper left

  My new Satellite A660-10W sometimes (not always), when turned on, boots up to a black screen with a flashing cursor in the top left. If I stop by pressing the power button, it stops immediately. I then wait a few seconds and press the power button again and then it usually starts very well.

  Could it be updated during this process and I'll be more patient (usually wait a few minutes) before shutting down when this happens?

  Usually something like that shouldn't happen. Satellite A660 is no different from all the other models and OS must be loaded shortly after Toshiba welcome screen appears.
  Do you use your laptop with factory settings or you have changed something?

• Show/hide the image with audio (audio does not if necessary)

  Then, I ran some tests to see what was going on so I could better explain my problem.

  I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

  When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).

  

  I tried two ways:

  having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).

  and

  Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

  If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

  There is no break on one of the buttons around this period, so I know this isn't that.

  What I am doing wrong?

  Thank you! :-)

  I'm happy to say after hours of frustration, I finally got to work.

  I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

  to display the image,

  hide the other images and

  Use the assign with 705 rdcmdgotoframe

  and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

  I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

  Thank you!!

  ~ Gina

• I have a HP Photosmart 5512. Just replaced the black cartridge, now, it will not print black.

  Windows XP OS

  Even tried a second new black cartridge in luck, it was defective.  Still no luck

  I downloaded HP Print & Scan Doctor.  He ran.  Not that it prints.  Don't know why, don't care.  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&lang=en&softwareitem=MP-114642-1

• Hard drive shows in the Bios and Device Manager but not in disk management.

  I recently had a hard drive fail because of the excessive heat in the computer case (he also took a memory too). When I plug the drive as a secondary drive in any computer it will appear in the Bios and the Manager of devices, but not in disk management, nor can it be considered be as ZAR and Spinrite disk utility.

  The disc spins up and down when turned on and seems to work. Just trying to recover data from the disk, so I can put it on a new drive.

  Any ideas?

  If its not shown in disk management I would use this bootable HD to the utility check disk (probably all riders is set correctly?)

• After the opening and closing of the color picker dialog box, I get a non-specific error message.

  Anyone seen this before?

  This happens with various PS projects and did not happen before the last update.

  Thank you Heinz.

  Please refer to a similar thread the color picker error: 'Could not complete your request because the program error'

  Let us know if that helps.

  ~ Assani

• Display dialog color picker JSX / CSAW

  Can someone guide me on how to display the color picker dialog box in Illustrator by programming?

  In photoshop that is really easy, just:

  app.showColorPicker (true);

  In Illustrator, I couldn't find any mention of such a method, or another option to display dialog programmatically, you would normally get when you double click on the square in Illustrator fill color.

  Is this possible using app.executeMenuCommand or some other method?

  I am writing a script that opens the color picker in response to a click of a button. I want to be able to get the chosen color and use it in the script.

  Thanks for the help!

  Dominik

  I don't know if you bring up the Illustrator color picker, in the meantime, you can play with the JS color picker

  alert ($.colorPicker ());

• Substitute the Trackpoint Cap why replacements don't have the black plastic piece? T420

  So I feel like my trackpoint began to wear on my T420 and I went to replace it today with the similar CAP of the Collection of Cape of Trackpoint (73P 2698) I ordered with my machine. When I took off my hat, I was surprised to see that there is a piece of black plastic attached to the underside of the CAP. None of the caps in the collection have this plastic piece, and I seem to be unable to remove it from the CAP. Without the black plastic piece, corks do not seem to fit properly.

  Someone at - it ideas?

  just take this black plastic of the old CAP and reassemble the back, then put in your new trackpoint. The stick plastic you saw does not go out like that, but you can put everything back in place.

• "SLIDE SHOW"IN THE GALLERY"GADGET

  SLIDE SHOW IN THE GADGETS DISAPPEARED AND I CAN NOT FINE HE TRIED TO PUT MORE PICTURES IN AND ACCIDENTALLY DELETED AND DON'T KNOW WHERE TO LOOK FOR HIM, HE IS APPEARED MORE LIKE A GADGET AVILABLE

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Sidebar-and-gadgets-overview#section_4

  Adding and removing gadgets

  You can add any gadget in the sidebar. If you wish, you can add multiple instances of a gadget. For example, if you are tracking the time in two time zones, you can add two instances of the clock and set the time of each accordingly.

  View all

  To add a gadget to sidebar

  1. At the top of the sidebar, click the plus sign (+) to open the Gadget Gallery.

     Add Gadget button

  2. Double-click a gadget to add it to the sidebar

  See you soon.

  Mick Murphy - Microsoft partner

• I bought the product but my download does not record who and always wants to buy it.  I am connected.

  My trial of Adobe Creative cloud was missing so I decided to buy it.  (I got an acknowledgement, so it worked.) I downloaded Illustrator, then it says the download is complete, but does not record the fact that I already bought the product and connects me basically just return to the page where I can buy... that does not also record that I bought already.  However, I am always connected online.  What should I do?  I needed this ready for class in the morning.

  See you soon!

  -Alison

  Try the sign outside and signature at the back on Creative Cloud App

  Sign out, sign in | Creative cloud desktop application

  If it is not turned on, then I suggest you to check that your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• Only use the STL color picker in Illustrator?

  I want to only use the STL color picker in Illustrator. Yet it still shows the default RGB color picker. Is there a way to change this behavior?

  I use CS6.

  Thank you!

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Error beep sound when you open the color picker in Illustrator

  Hello

  I have a strange problem. Every time when I double click on the color picker in illustrator, I hear a boring. It's the same when you make a mistake, only then I get a dialog box with information about the error. The color picker appears and flashes at first. It works normally. I got turned down the volume, but of course that is not a solution. Anyone has any idea what it is?

  On my laptop, it works fine.

  Thanks in advance.

  Mark

  OK, I fixed it. I changed the workspace and he again changed back and it has been resolved. So, we'll probably never know what happened. Thanks fot your time.

  Select this option.