iMac-r with R9 M295X runs only on 2GB

Similar Questions

• with flv movie runs only on place

  Greetings-
  I have built a Flash movie using the FLVPlayback component and attached a .flv movie in its source. As far as I know that the video file is not embedded in the timeline, it is attached in a separate for reference the .swf file.
  I released the film, and can read the resulting film, as expected, locally. However, when I FTP the files to my server the object Flash player seems to load (on IE, I get the message "Click to activate this control") but nothing happens. I mean nothing. No film, no error message, no "Please wait, loading...". ' nothing. I checked the safety of the local files on the server in question and everything seems in order, even the MIME types are set correctly (as a test, I put another file .swf in the same directory on the server, he called directly and it loaded well; my film in question does not simply play). This makes me wonder what I'm doing wrong in the edition of my process of Flash part. Why it would play OK locally, but not on my server? And why another .swf file would play the same directory and not my movie file? Again, I don't find any errors to speak of, I saw the source, I tried to hardcode the paths towards the film and the swf for the test and still nothing. I miss a chapter in publishing?
  
  Thanks in advance,
  
  Rich

  Fixed.

  Problem: PBTKATC (problem between keyboard and Chair)

  Solution: My server had adjustments of the MIME type for .flv files and not the .f4v. My Flash movie requires a .f4v file and given that the MIME type was missing the film just hung. By simply adding the MIME type the film now works.
  http://www.cfsnap.com/Flash/cervicalRadiculopathy/cervicalTractionDevices.html

  Sorry to have wasted your (and my) time! Note for later: CHECK THE MIME TYPES!

  Thanks again,

  Rich

• Satellite L20-101: I think as 667 Mhz module runs only with 266 Mhz

  Hello

  I bought 2 x 1024Mo DDR2-RAM for my L20-101.
  First I tried 533 MHz, but the laptop does not work with them, so I bought the
  Version of 667 MHz.
  CPU - Z says that the FSB:DRAM - ratio is 1:2 If the two are in fact run with just 266 MHz.

  I've updated the BIOS with the latest version of the Toshiba-home page, but nothing has changed.

  So finally, my questions:
  1 perhaps CPU - Z is false (I don't think so...), are there any other good programms to check the parameters of memory?

  2. If the values in the program are correct: where can I change the value of the report? Is it possible to see more than a few settings in the BIOS or is it a rider?

  Thanks for your help

  Hello

  First of all it is important to mention that the Satellite L20-101 supports a FSB of 533 MHz.
  So the DDR2 400/533 256 MB (PA3389U - 1 M 25) and DDR2 400/533 memory modules 512 MB (PA3412U - 1 M 51) should work and are 100% compatible!

  If you use the module of 667 Mhz, it runs only at 533 Mhz due to the limitation of the front side bus.

  In addition, I think you have misunderstood something.
  Here are the modules DD2 and so the CPU - Z recognizes the speed of the modules as 266 MHz (2 x 266 = 532 Mhz)
  If everything seems to be ok!

  PS; You can also use the other tool called Everest home edition. It s a freeware and very useful to run a diagnosis system and equipment

  Greetings

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

• While the loop within a box Structure runs only once a target FPGA

  I have a card OR cRIO-9012 RIO for the HIL system. I have a target FPGA file when I use a While loop within a while loop I use the box Structure to check a real condition inside I have the function of activation of the ports and selecting the analog and digital ports. But for my code the code runs only once on repeted times that we have in the LabVIEW environment.

  I also need help to optimize the code. I've seen people using While loop timed in the FPGA target I don't use in both cases.

  I've attached my FPGA with the Version of LV2012 file.

  Waiting for your comments.

  Thank you and best regards,

  Ganesha Moorthy

  You have while loops inside the structure to deal with a constant of false cable to the stop condition. These loops will obviously never stop so browse your outside while loop (containing the case structure) can never.

  This has nothing to do with the FPGA target, the same thing will happen in the development environment.

• I bought the only Windows 7 @ my Walmart not realizing it was a DVD, I can run only from CD which (if any) I can do?

  Help!

  I bought the only Windows 7 @ my Walmart not realizing it was a DVD, I can run only from CD which (if any) I can do?

  Borrow an external DVD drive.

  You run the Upgrade Advisor to make sure your system is compatible with Win7?

  99% of the systems should have DVD players, if they were built in the last 5 years or so years - if the system is older than that, there is a good change that it will not be good enough to give a sense running Win7.

  http://Windows.Microsoft.com/UpgradeAdvisor

• Scheduled task runs only if connected (W2k3 server)

  Hello

  This was bugs me for a week now: W2k3 server a customer has a problem to launch a specific scheduled task.

  The task calls first on an application that generates files; Excel is open, then a macro is executed, which saves more than some files; Finally, these files are copied to a UNC path to another server.

  -The permissions on all the files are OK (account used is domain administrator)

  -"Run only if connected" is NOT selected

  -But: Excel displays apparently the first home screen whenever it is opened with this account.

  Any advice would be greatly appreciated!

  Hello Quip666,

  Since you are on a domain, I recommend you to repost your question with the professionals at Technet Windows Server Forum where one of the experts in this area would be better suited to offer you a solution. Thankis!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows loading in black and white, when running in safe mode with network it runs in color, how can I solve this?

  When I load windows it runs only in black and white, I tried to start in safe mode with network and it runs in color, can you tell me how to solve this problem?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Want to run only 1 without anything else running program

  I have an audio software called Acoustica Mixcraft Pro Studio recording, but because of the other system shows and programs that run he drives my lag registration program and jump and does not have a lot.

  I was wondering if there was a way to run the program with NOTHING else on my system running only for solo performance for the program.

  Is it possible to easily activate or deactivate only run the program without having to put an end to all tasks in the Task Manager? Please let me know it would be a great help! Thank you very much.

  -JayP93

  With just open Firefox, my CPU shows a loading of 1-4%:

  

  If I killed all background processes, then I'd gain almost nothing.

  Now, I wonder what percentage of loading, you get on your computer when you have nothing other than the office running. If it is greater than 10%, which processes load the CPU?

  What load you get when running Acoustica Mixcraft Pro Studio?

  I suspect one of four things:

  • You have enough RAM. 4 is a good number for Windows 7.
  • You have an old machine with a slow processor. See below for a measure of performance.
  • Acoustica Mixcraft Pro Studio places a very high load on the processor. I use WavePad to my sound recording business and its CPU loading is moderate.
  • You have another software, for example a Rolls-Royce antivirus or a firewall that slows down the CPU.

  Below you can see the Performance of my machine index. You can join this table by right-clicking on 'Computer', then Properties, then Tools and performance Information.

  

• Cannot install Lightroom 6 (not CC) on iMac 5K with 10.11.3

  Hello

  I just bought and downloaded Lightroom 6 LS11 (not CC) in the Adobe store. When I start the install.app this appears:

  

  Installation program cannot be initialized. The security settings on my iMac 5K with 10.11.3 allow installations from anywhere.

  What should I do here?

  Thank you for your comments

  Bernd

  Please follow the steps below to delete every thing related to creative cloud of the machine:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall of your machine, see OS x: about the application firewall - Apple Support
  • Turn off the firewall of the security program installed on the computer Internet.
  • Go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  The changes are temporary you can restore these changes once the installation is complete, as this might be one of the reasons why the app is not installed *.

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager)

  4. then run the cleanup tool to remove the clouds creative and Adobe Application Manager (if it remains in the machine)

  5 right-click on the icon in the Finder, then select 'Go - To' folder.

  6. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  7. browse to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  8. new > right click on the Finder icon and select 'Go-' the folder option > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  9. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  Adobe 10 - run cleanup tool. > If present, select "Adobe Application Manager for Mac OS X 10.6" and then click "Clean up selected."

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  11. after that, follow the steps in the SOLUTION 3 in the following document to fix the file HOSTS: applications of Adobe Creative Cloud reverts after 2015 updated CC test

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

  Let us know if that helps.

• How to create a banner size mouseover who starts running only at the end (in Adobe Edge animate)

  A banner general practice is to have the entire banner be clickable as well that trigger the mouseover and mouseout/mouseouthandler().

  In flash, you would do an invisible button that captured the events, and then looks like an internal chronology of a chart of the CTA to play and which would scale upward.  I would also (in the main scenario where all the basic animation) a fade in opacity to the top of the CTA at the end Flash would allow me to set the rollover and rollout on the last image, so no features a rolling code would execute while the button was in invisible state.

  Along the busy, I know how a symbol, with an internal chronology which can evolve the assets. I know how to use the action of another layer to speak to this chronology of symbols and to play and to reverse the trend.

  But I can't understand how the mouseover and mouseout/mouseouthandler() code to run ONLY when the banner has played through the main timeline animation.

  Thank you.

  make a layer/button which is at the top with a transparent png of the size of your project. First frame of the main timeline, the value to display last image off the coast, it appears on the value.

• My new Publisher El 12 runs only once after restarting the PC - how to fix?

  My new publisher of 12 items, runs only once after restarting the PC and seems to work well. I did a "clean install" repeatedly (cleared Temp files, shut down all applications, including Norton Antivirus and then installed DVD after a clean reboot). I can launch organizer of 12 elements several times, but the photo that editor runs only once. After that, I have to restart the PC, and then I can run the Editor again, but once again, only once. I also first 12 items for video files - no problem, he launched several times. I see that Alfredo has a similar problem: How can I fix?... is it a bug of El 12?... Thanks for your help... k-paul

  Thank you very much Peru Bob... your statement works... of course, this stitching is 12 items of closing/out not really closes it (which is why I could not re - start it), so there's always a problem... I can live with that, but why would the program stops not when I close?... k-paul

• Run only

  Hello
  
  I made a request and now I puted in run only mod. How can I run this app and how do I get back the process, so if I need, to make the new functionalty?
  
  Thank you

  Hello

  Let me say your application id is 100, you just point browser on

  http://yourserver:port/pls/apex/f?p=100
  

  It might help to work with the State to build
  http://download.Oracle.com/docs/CD/E17556_01/doc/admin.40/e15521/aadm_build_status.htm#sthref155

  Kind regards
  Jari

• Since its installation in Firefox 20.0.1. There is a box in the center of my screen titled progress install with a bar running below the Green progression.

  Please help this driving me Mad
  Since the installation of Firefox 20.0.1. on my MS Windows 7 Toshiba Laptop there was a box in the center of my screen titled "progress install < with a bar running below green growth."
  Firefox 20.0.1 (FF) works very well and I can drag the box of progress on my screen to my heart's content. Although there no small cross at the top right I can get rid of him by my mouse over the icon (ff), pinned to taskbar program in hover. This gives me a box of progress of installation with small cross, click and his party. That is until I got close and restart (ff) and back it comes in the middle of the screen. I tried to get rid of it through CTRL-ALT-DEL Task Manager, but even once, it reappears on start up (FF) I also stripped (ff) of my machine, once using widows uninstall/change of MS program features and for the second time by using third-party software as soon as I reinstall (ff) new same old problem.
  Thank you
  Cordially Fenfolly

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

  When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

  What country do you live? Because I just checked this album and all songs should be available in the Apple music - and thus be downloadable. (I live in the US BTW.)