iMac - screen Calibration two iMacs

Similar Questions

• Cannot save the new color - screen the screen calibration is yellow/green

  original title: I have the problem with the recording of my screen calibration.

  Hello! I need help to solve this problem.

  There was one day where I pressed accidentally some keys at the same time as my display turned on a little yellowish. Since then, I tried to return to normal. I calibrated my display back to normal settings, but it does not save my settings. Every time I have start or restart my laptop, the screen becomes yellowish.

  Is there a solution to this problem? Please help me. Your help is very appreciated. Thank you! ^^

  Hi axel_max,

  Since it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your computer previously, working state.

  If this does not resolve the problem, specify the brand and model of your computer with the computer version of Windows you have installed.

• How can I use Windows 8 to adjust the size of my desk? He 'overflows' the screen about two inches around the perimeter.

  He 'overflows' the screen about two inches around the perimeter. Example: The clock in the bottom right is almost invisible.

  I don't need to change my resolution and cannot do with my monitor. Also, I don't speak of re-sizing the interface, not the wallpaper.
  What kills me is that I did this work before and he doesn't remember how!
  I have the latest drivers for my card AMD (helps nothing in the Catalyst Control Center) and the generic PnP monitor.
  How can I get instead of Windows 8 which allows me to adjust the size of the screen (no icon or text size and no resolution)? Am I crazy, or was it easy to find before?
  Thank you!

  Hello

  This looks like a problem of scale .

  Open the Catalyst Control Center.

  Expand the section My Flat-Panel digital .

  Select the item Properties (digital dish) .

  In the resizing of the Image section, place a check in the option enable GPU scaling .

  Select the image of the scale to the size of the full screen .

  Click Apply/OK.

  Test and let us know the results.

  Concerning

• full screen mode two monitors, 1 VM, possible?

  Is it possible to have my a Windows 7 VM mode full screen on two monitors?

  VMWare Fusion 6 - OS X Mavericks

  Hello

  Open VMware Fusion > in the menu bar, click View > click on "use all displays in mode full-screen.

  Now when you put a virtual machine in full-screen, it must use both screens.

• How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

  I am Brazilian and I use Adobe Acrobat Reader DC a lot. I would suggest an implementation of features present in the PC, I missed a lot of things on Android, which is 'New window' or something like that, like split the screen into two parts in order to see the two different parts of the same file.

  For smartphones, its use is restricted, but for tablets, it can be really useful, because it allows the display of two distinct points of the same file,

  I have reduced considerably the use of paper using this application, however, I need to navigate the file always pick up a few points seen earlier, which causes a lot of discomfort compared to printed documents.

  This is a suggestion, but I would like it to be considered.

  Thank you for your request. We have taken note of the same and must try to integrate it into one of our future releases.

  Thank you.

• Why my printer hp pro L7500 is not match the colors on my screen calibrated in photoshop?

  My hp pro L7500 printer is not match the colors on my screen calibrated in photoshop.

  Hi asnider713, did you get this figured out?

  I suggest for your printer by looking at the site: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?cc=us&taskId=135&prodSeri esId = 2511708

  You should try to calibrate your printer.

• At startup, the screen displays two websites of mozilla instead of one, why?

  To start Mozilla, each time, two sites of Mozilla display. We're 'Mozilla Firefox Start Page' and the other is the screen "on the first installation of Mozilla". Installing the first page is displayed on the screen. Both are active.

  I would like to see a single one. I don't know what to do.

  You can check for problems with preferences.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• Screen calibration new 27 "5 k

  Hey people. I am a photographer, and very new for Mac this is my first. I am wanting to make some changes in my business and do the things this time around. I'm looking for help on doing a full calibration of my monitor 27 "5 k, it produces the same range of colors, brightness and contrast that is my pro printer. My printer is a Canon Pixma Pro 9500 Mark II. I've already preset it for Abobe 1998. I use the same on my Nikon D800. What systems are there for me to calibrate this new monitor? I saw the X-Rite on site B & H, but never bought. Never actually, I calibrated my old NEC monitor on my pc Windows-based... I knew how to adjust everything to get what I wanted off the printer. I'm tired of everything that setting. I want to know what I see on my screen, that's what print off my printer. Any help that you guys and girls can give me will be greatly appreciated.

  A good place to start is with > http://www.computer-darkroom.com/colorsync-display/colorsync_1.htm

  Another is > http://osxdaily.com/2015/10/14/access-expert-mode-screen-color-calibrator-mac-os - x /

• Y50 yellow yellow immaculately - screen Calibration

  Given that Lenovo has said that the yellow problem dark on the Y50 is a problem, but they usually offer a fix, then im open this thread to see if anyone can provide a partial solution to this problem.

  Some things I'm looking for

  Calibration of the screen-1 - procedure of calibration & recommended profiles boards - can anyone provide a how to on how to do this?

  2 - dynamic contrast - does anyone know how to disable or change?

  3 - another solution?

  
  

• Satellite A200 - black screen with two beeps

  Date: October 17, 2009

  I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

  When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

  Thank you

  Hi mate,

  Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

  Have you already tried to connect an external monitor? You can see a picture on this subject?
  I don't know but maybe what he s m only internal something wrong with the monitor.

  In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

  Welcome them

• Split screen in two and purple lines with yellow screen?

  So, I was watching a YouTube video and my screen started flashing all crazy. So I turned it and turn it back on and now my screen is yellow with purple lines and there are like two screens because it is split in the Middle goes horizontal. Sometimes I turn it on and it works very well for about 5 minutes then it starts flashing and goes back to all these things. I would like to safe mode, but I do not see Scripture because that its all messed up. I also try changing the screen resolution setting, but it won't let me for some reason any. Here's what my screen looks like http://s1353.beta.photobucket.com/user/zachman12356/media/untitled.png.html?sort=3&o=0

  On Sunday, November 4, 2012 18:07:12 + 0000, ZachMan101 wrote:

  So, I was watching a YouTube video and my screen started flashing all crazy. So I turned it and turn it back on and now my screen is yellow with purple lines and there are like two screens because it is split in the Middle goes horizontal. Sometimes I turn it on and it works very well for about 5 minutes then it starts flashing and goes back to all these things. I would like to safe mode, but I do not see Scripture because that its all messed up. I also try changing the screen resolution setting, but it won't let me for some reason any.

  It is certainly not a question of Windows. You have probably one
  problem with one of these three things:

  1. the monitor

  2. the video card

  3. the cable connecting the monitor and video card.

  First try the cable and make sure that it is closely related to the time
  ends.

  If this is not it, see if you can borrow a monitor from a friend and try
  instead of yours. If this solves the problem, you need a new
  monitor.
  If this solves the problem, it is probably the video card. But
  before you replace the video card, open the case and make sure that it is
  sitting in his niche.

  Ken Blake, Microsoft MVP

• touch screen has two lines in the upper part

  I just bought a R5-571 of Best Buy. It's a two in one, but there's an ine doulbe which crosses the top of the screen. However, my initial was that it served a purpose and there was some setting that was originally there, but I couldn't find anything. I took a screenshot, but the lines do not appear in the screenshot. If you use the browser Chrome location would be right in the middle of the tabs down through the entire screen or about 3 mm high and the lines are about 1 mm.

  I would like to take it back to Bestbuy and Exchange.

• Can I have different screen on two monitors background images?

  I use two monitors side-by-side.

  There is a supply virtually unlimited background images to display, including the pre-made themes and slideshows, but no way I can find to have different images on each monitor.

  Am I missing something?

  Hello

  Windows 7 doesn't have this built-in capability. There are third-party software multi-screen solutions.

  I also use two monitors and I think a better ioption is to use two screens wallpaper. It is an image large enough to cover both monitors. For example, I have two monitors set in 1680 x 1050 and I use a screen background image which is 3360 x 1050 and set the tile option. It's a cool effect.

  There are a lot of websites that offer these dual monitor wallpapers. Just use your favorite search engine and look for "wallpaper bi-ecrans".

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to connect the laptop screen to two different TVs?

  I try to show what is on my laptop two two different TVs at the same time. I already have the hdmi cable connected, but I can't seem to find a way to show my monitor on both screens at the same time. I can get it to show on one or the other. Any suggestions?

  Thank you
   
  Original title: connection screen of the laptop to two screens

  Hi GabrielGomezYZ,

  Thanks for posting your question in the Microsoft Community Forums.

  You have a problem with the display of the content on the laptop on more than one TV. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Method-

  I would have you look at the article-

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=DT7eyPCoaLh

  In addition, you can check the items of reference-

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-in/Windows7/work-and-play-better-with-multiple-monitors

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  We know if you need help. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• SX2210T-touch screen with two monitors feature

  Solution found by the user ES128 for touch dual monitor.
  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  Screen touch troubleshooting.
  * Disconnect the 2nd monitor of the PC. Restart the PC so that it only displays one monitor in Device Manager. Depending on your operating system, do the following: -.
  SX2210T Driver (Windows 7 only)
  SX2210T-Touch Application
  SX2210T-Touch Cam
  SX2210T facial recognition Application (no not necessary, only if you want)
  * Test the touch screen on the single monitor feature.

  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  I have the 2220 sort of setting before the 2210 so it seems I have a gigantic version of the laptop Acer Iconia with two screens.