iMac, sleep, no downtime required password?

Similar Questions

• With some sites (not all) that require passwords, how can I get Firefox to resume registration of passwords when the site is not in the list of exceptions?

  For some banking sites that require passwords, I'm 99.3% sure that I have at one point, never said 'Remember password'. Now, I want to change my mind. When I go to Options/Options/Security/Remember.../Exceptions, the sites are not listed, but I'm not always asked the question "want to remember...". »

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• Wi - Fi pass drops after iMac sleep mode

  Help, please. I had a lot of Wi - Fi problems after upgrade to Yosemite. I know that many others have had similar problems and the Genius bar was not able to find a solution. I get the same "I never heard of this problem before" and then run simple diagnostic tests. Here are some features:

  -iMac 21.5 "2011 Office

  -OS X Yosemite 10.10.5

  -Have had problems with connectivity Wi - Fi based on the current version works, but the worst problems came with Yosemite

  -iPad 2, Asus computer laptop and HP printer work fine. I tested the Modem and the router, they work well

  The problem: after my iMac Sleep Mode wake up my network connection is interrupted. I have to physically click the Wi - Fi connection and wait it is the signal (it takes about 30 seconds). It is not a big problem, but it becomes very frustrating after what happens every time. I have other users in households who also have this problem and they are not very good with the iMacs.

  Someone had this problem and was able to remedy?

  Thank you in advance,

  Scott

  Open Network preferences > click on the gear down > select set Service order > drag Wi - Fi to the top of the list of Service order > click OK > click on apply > close preferences

  

  If this does not help, go to > use Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support

• How do you prevent Firefox to go sleep and re - enter password required?

  The screen, I watch turns off after a while if no activity and I need to type my password to return... My computer settings are all set to never sleep or turn off.

  This isn't Firefox. It is the computer screen saver.

  • Set the screen saver for a longer timeout
  • Disable the screen saver asking for a password

  PS, what Firefox is doing during that time?

• Sierra on iMac sleep restart OS

  Select the day before leaving the iMac, or when sleep occurs when the value in energy saving; Sierra of OS - macOS 10.12 (A 16, 323), Darwin 16.0.0, system restarts on hitting escape to wake up.

  Hi SteveSJS,

  I see that you are having problems with your Mac restarts once you press the ESC key to wake your Mac from sleep. I understand you want to your Mac to wake up from its sleep without problem. I'll be happy to help you.

  The first thing I want you to do is a SMC reset, and then test the issue out by putting the Mac to sleep and wake it again.

  Reset the management system (SCM) controller on your Mac.

  If the problem is still there, please start Mac up in safe mode and then put your Mac to sleep and wake up then as you normally would. Check if the problem persists. So go ahead and restart your Mac to pick it up on your normal user account.

  Try safe mode if your Mac does not end commissioning

  Alternatively, you can test to see if this problem occurs in an another user account on your Mac. For more information on the implementation of a different user account, please see:

  How to test a question in another account on your Mac.

• My iMac can't sleep; I have a request to someone who has an iMac sleeping properly.

  My iMac has constantly made call sleep and wakes up on the screen every 15 minutes approximately.  I ran the "journal of the pmset g" Terminal command and tries to interpret the results.

  May we with a Mac post well behave the terminal results in "Journal of the pmset g" so I can see what looks like a normal output?  It will help me to get a better idea of what's different in my results.

  Also, if someone does not know how to interpret the log, please let me know if you can clearly see problems with my system.  From journal here:

  2016-09-11 07:37:37-0500 sleep entering Sleep state due to 'Idle sleep': TCPKeepAlive = active using AC dry 331

  2016-09-11 07:37:39-0500 Wake queries [proc = mDNSResponder request = maintenance inDelta = 5885] [proc = UserEventAgent request = SleepService = 27897 info = "AppRefresh:com.apple.apsd.apprefresh, BGTask:com.apple.SoftwareUpdate.Acti vity" inDelta,] [proc = UserEventAgent request = TimerPlugin = 31886 info = "AppRefresh:com.apple.apsd.apprefresh, BGTask:com.apple.SoftwareUpdate.Acti vity" inDelta,] [proc = UserEventAgent request = SleepService inDelta = 27897 info = "AppRefresh:com.apple.mail.ApplicationRefresh BGTask:com.apple.Safari.Safe Browsing.Update",] [* proc = UserEventAgent request = TimerPlugin inDelta = 3597 info = "AppRefresh:com.apple.mail.ApplicationRefresh BGTask:com.apple.Safari.Safe Browsing.Update",] [proc = request NotificationCenter = maintenance inDelta = 48312 info = "com.apple.notificationcenter.dnd"]

  2016-09-11 07:37:39-0500 PM Client delays Acks to notifications of sleep: [com.apple.apsd is slow (2564 ms)]

  2016-09-11 07:43:05-0500 core customer delays Acks to notifications of sleep: [driver AppleThunderboltNHIType2 is slow (msg: WillChangeState to 2)(364 ms)] [BroadcomBluetoothHostControllerUSBTransport pilot is slow (msg: SetState to 1)(4014 ms)]

  2016-09-11 07:43:05-0500 assertions PID 91 (mDNSResponder) MaintenanceWake created "mDNSResponder:maintenance" 00:00:00 id: 0x0xd00000d44 [system: SRPrevSleep kCPU]

  2016-09-11 07:43:06-0500 assertions PID 91 (mDNSResponder) published MaintenanceWake "mDNSResponder:maintenance" 00:00:00 id: 0x0xd00000d44 [system: No. Assertions]

  2016-09-11 07:43:06-0500 assertions Kernel Idle sleeping antireflux: IODisplayWrangler

  2016-09-11 07:43:06-0500 display Notification is enabled

  2016-09-11 07:43:08-0500 Wake Wake of Normal sleep [CDNVA] due to XHC1/HID activity: using AC dry 646

  2016-09-11 07:43:08-0500 core customer delays Acks to wake notifications: [AirPort_Brcm4360 pilot is slow (msg: SetState to 2)(345 ms)] [AppleIntelMEClientController pilot is slow (msg: SetState to (1) 326 ms)] [PRT0 pilot is slow (msg: SetState (2) 1212 MS)] [AppleHDADriver driver is slow (msg: SetState to 1)(468 ms)] [AMDFramebufferVI driver is slow (msg: SetState to 2)(941 ms)] [en0 pilot is slow (msg (: DidChangeState à 2) (2015 ms)] [AMDFramebufferVI pilot is slow (msg: SetState to 2)(599 ms)]

  2016-09-11 07:43:38-0500 notification display is off

  2016-09-11 07:43:38-0500 assertions Kernel Idle sleeping antireflux: - none -.

  2016-09-11 07:53:39-0500 assertions PID 55 (powerd) InternalPreventSleep created "com.apple.powermanagement.darkwakelinger" 00:00:00 id: 0x0xd00000d65 [system: SRPrevSleep kCPU]

  2016-09-11 07:53:54-0500 assertions PID 55 (powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id: 0x0xd00000d65 [system: SRPrevSleep kCPU]

  Sleep / wakes up from boot to the 2016-09-10 21:25:10-0500:0 Wake County dark in this sleep cycle: 0

  2016-09-11 07:53:54-0500 sleep entering Sleep state due to 'Idle sleep': TCPKeepAlive = active using AC dry 960

  Thanks in advance.

  My end result is below. I hope this helps. Sleep works very well for me on OS X 10.11.6. Let me know if oyu have any questions on other parameters.

  2016-09-11 11:09:02-0500: showing all currently detained IOKit assertions of power

  Systemic assertion status:

  BackgroundTask 0

  ApplePushServiceTask 0

  UserIsActive 1

  PreventUserIdleDisplaySleep 0

  PreventSystemSleep 0

  ExternalMedia 1

  PreventUserIdleSystemSleep 0

  NetworkClientActive 0

  Classified by process of owning:

  The NEST 99 (hidd): 00:09:47 [0x00004d1e000903c4] UserIsActive named: 'com.apple.iohideventsystem.queue.tickle '.

  Timeout fires in 75 seconds Action = TimeoutActionRelease

  56 (powerd) PID: [0x000000180008012c] 05:38:25 ExternalMedia named: 'com.apple.powermanagement.externalmediamounted '.

  The Assertions of the kernel: 0x10c = USB, BT - HID, MAGICWAKE

  ID = 500 level = 0 x 255 4 = mod USB = 12/31/69, 18:00 description = com.apple.usb.externaldevice.fa140000 owner = Hub keyboard

  ID = 501 level = 0 x 255 4 = mod USB = 12/31/69, 18:00 description = com.apple.usb.externaldevice.fd140000 owner = Backup + Office M

  ID = 502 level 255 = 0 x 100 = MAGICWAKE mod = 12/31/69, 18:00 description = en0 owner = en0

  ID = 503 level = 0 x 255 8 = BT - HID mod = 12/31/69, 18:00 description = com.apple.driver.IOBluetoothHIDDriver owner = BNBMouseDevice

  Idle sleep antireflux: IODisplayWrangler

• IMac sleep update af 2016-004

  After that I applied yesterday the security fix for 2016-004 to my Imac (dec 2010 model) I can not enter the mode 'sleep'.  I tried to do a safe boot (found a note on the net, that it has solved the problem for some) but this isn't for me

  When I try to use mode 'sleep' - the screen turns white as usual and my external USB drive turn off - but I sounds like the fan in the Imac does not turn down. After a few minutes it back on the screen

  Until yesterday, everything worked very well - and the update of security is the only change that I made

  Any ideas?

  Carsten Fuhr

  Denmark

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

• My iMac sleep

  I have an iMac 27 "end 2015 a few weeks ago, and the sleep function worked fine. But all of a sudden yesterday, he refuses to go to sleep. I used to use the shortcut keyboard option + command + eject, but it does not work. The screen just turns off. Then I tried to choose "sleep" from the Apple menu, but the same thing. The screen turns off, but the drive never turns down. I know it's not instantaneous, but I leave 30 seconds and it will not turn it down. It continues to run until I have press a key or click the mouse. Already, I went through the evolution of the system preferences. Nothing is shared by the computer. "Wake for network access" is disabled. 'Allow Bluetooth wake up' is disabled. My keyboard is a USB Apple wired one. I quit all programs and applications and it will not sleep. I moved the cursor "display off" from 10 minutes to 1 and then back to 10 minutes. I left alone; the screen is off, but the disks never turned down after several hours. If I want to leave for a while, I let the music so he can't SLEEP. But for the last test, no music was played. I checked if something prevented from sleep in the activity monitor, but they are all the 'no '. Energy saving, "Prevent computer to sleep automatically when the screen is off" is not checked. "Put hard drives to sleep when possible" is checked. I use the same settings I used for on an another iMac. It's very frustrating because it was working fine the other day. I turned off the computer and unplugged it overnight and it will not sleep. Anyone know what is happening?

  Try the tips here:

  If your Mac does not sleep or wake up when expected - Apple supports

  C.

• iMac, sleep and wake up too often

  I noticed the USB external climb the spinning very frequently on the occasions and I was wondering if anyone had some ideas.  Today, some bozo was trying to hack my ssh key access only and I saw it in the system.log

  20 Feb 11:02:20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4847 to 192.168.1.21.22

  20 February 11:03:25 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4100 to 192.168.1.21.22

  20 February 11:04:31 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.2682 to 192.168.1.21.22

  11:05:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3920 to 192.168.1.21.22

  20 Feb 11:06:24 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1139 to 192.168.1.21.22

  20 Feb 11:07:27 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4675 to 192.168.1.21.22

  20 Feb 11:08:27 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1067 to 192.168.1.21.22

  11:09:30 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1077 to 192.168.1.21.22

  20 Feb 11:10:30 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4604 to 192.168.1.21.22

  11:11:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3898 to 192.168.1.21.22

  11:12:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3846 to 192.168.1.21.22

  20 Feb 11:13:24 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1178 to 192.168.1.21.22

  20 February 11:14:26 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4497 to 192.168.1.21.22

  My question is why is go it mac sleep so fast and then wake up again when you access?  Power settings are:

  In use:

  standby mode 0

  Sleep on the power button 1

  womp 1

  halfdim 1

  hibernatefile/var/vm/drag

  PowerNap 0

  gpuswitch 2

  automatic restart 1

  networkoversleep 0

  disksleep 0

  Sleep 10

  autopoweroffdelay 14400

  hibernatemode 0

  autopoweroff 1

  ttyskeepawake 1

  displaysleep 10

  standbydelay 1

  A secondary question is why does have the external USB drive go upward because some accessible a network port?  Nothing on the disc has been consulted.

  Thank you!

  You will need to turn off the wake for network access in the energy saving settings.

• everytime I turn on my pc after being in mode 'sleep', he wants my password, never did this before and I don't like how can I change this back?

  has never done this before, don't know if it was an update or what, but for the last few days he has done this

  Hello

   
  Follow the steps mentioned below that can help you in the matter of fixing.
  (a) go to control panel of .
  (b) select the security system and .
  (c) select (in the Power Optionssection) require a password when the computer fate of Eve.
  (d) eventually select change settings that are currently unavailable
  (e) select do not require a password.
  Hope this information helps.

• When I turn on my computer, already set up profiles disappear and are replaced by 'Kiosk' and 'other users' options that require passwords. I can get into 'other users' and find my previous user accounts, but lose them again after the reboot.

  I bought a laptop with Windows 7 installed a few days ago. I started to set up user accounts, administrator and a guest. So far, I had been able to shut down and restart with the accounts of users even reappear. I turned on my computer and two 'user accounts' had replaced my previous. Named "kiosk", which requires a user name and password which I do not have access, and one named 'other users' that requires a user name and password. I type in comments and no password and then I can access the guest account. When I disconnect my administrator profile is available next to my usual guest account. Restart the "kiosk" and "other accounts" reappear. If it's any help, as soon as I put on my computer, I had named MDX kiosk and administrator accounts. I deleted the account kiosk MDX. I don't know if this is related at all. It is not necessarily a problem, but a disadvantage however and I panicked when this popped up on my computer.

  Yes, you can uninstall MDX (it is called the digital experience of Microsoft) and it will remove the kiosk account and no trace of it, and then restart your machine. All other accounts on the machine should stay, but I would like to make a backup first. This should solve your problem. Associated with the store, you bought from should have done that for you, why they failed, I have no idea (we are instructed to do before the release of the machine to customers). If you don't mind asking me, where did you buy the machine?

• Selection of the language makes the required password field

  Hello

  I use jDeveloper 12.1.2

  I have a login page with name, password selection and the language of the user (component SelectOneChoice - soc1). I have a value change listener in the field of languages selectonechoice which will set the locale to the newly selected language. I put partial triggers on the name field and the password of the user for soc1. It comes to make the labels the user name and password appear in the selected language. This makes the password field if necessary even if there is value in the field. I also noticed that this occurs only when the language is other than English.

  My lines jsff for the user name, password, and language are-

  "< af:inputText label =" #{loginBean.usernameLabel} "id ="it1"value =" #{loginBean.username} "required ="true ".

  showRequired = "true" autoComplete = "off" partialTriggers = "soc1.

  / >

  "< af:inputText label =" #{loginBean.passwordLabel} "id ="it2"value =" #{loginBean.password} "required ="true ".

  secret = "true" showRequired = "true" autoComplete = "off" partialTriggers = "soc1.

  / >

  < af:selectOneChoice label = 'language '.

  "value =" #{loginBean.Language} "id ="soc1"binding =" #{loginBean.soc1} "autoSubmit = 'true '.

  valueChangeListener = "#{loginBean.localeChangeListener} '"

  >

  < af:selectItem label = 'English' value = "" id = "si1" binding = "#{loginBean.si1}" / >

  < af:selectItem label = 'French' value = 'fr' id = "si2" binding = "#{loginBean.si2}" / >

  < / af:selectOneChoice >

  The value change listener code is-

  Private Sub changeLocale (language: String) {}

  This.setLanguage (Language);

  Locale newLocale = new local (language);

  FacesContext context = FacesContext.getCurrentInstance ();

  context.getViewRoot () .setLocale (newLocale);

  }

  {} public void localeChangeListener (ValueChangeEvent vce)

  changeLocale (vce.getNewValue m:System.NET.SocketAddress.ToString (()))

  }

  I have the tag f: view with the locale defined as local = "#{loginBean.locale}". "

  Whenever I change the language other than English, the password field is back with the error required, even if there is value in the field. He can't if I choose the language than English. can anyone shed light on what I'm doing wrong here.

  Thank you

  UMA

  Hello

  I think you are missing immediate = "true" in the selectOneChoice.

  If this does not work, check this post; ADF and JHeadstart: skip validation on selectOneChoice selection

  Kind regards

  Ruben.

• MAIL PAST REQUIRED password enter your password "XYZ" in internet accounts

  Help!

  Mail on your Mac keeps asking for two of my passwords. Passwords do not work and the e-mails come in, but then he asks me once AGAIN passwords after a few minutes.

  I think it has something to do with Internet accounts

  I should end my life now or later?

  How boring!

  Please read If Mail on your Mac continues to ask for your password - Apple support.

  If this does not help or if the problem persists for more than a day or two, please write again for additional suggestions.

• iMac sleep

  Mode "sleep" not to close the external media

  Saving energy/preferences system - is put hard drives to sleep when possible checked?

• Tecra A10 - 15 c: HDD REMOVAL of REQUIRED PASSWORD

  I have a laptop Tecra A10 - 15 ° c which has a Hitachi 250 GB hard drive.
  My client was 1st a password CMOS and here after a HARD drive on the HARD drive password.

  My problem is that the customer does not know what is the password for the HARD drive.
  We were able to remove the CMOS password but now we're stuck with the HARD drive password
  Does anyone know what software Toshiba use to place the security of password disk HARD low level

  I am looking for a removal tool.
  Thank you

  Hello

  You know the HARD drive password?
  If not, then you will be not able to get out this person would be able to remove the password disk HARD unknown. In this case, the HARD drive is useless and you would for a new born.

  PS; Here's a thread where you can find an instruction how to remove the known password HDD:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=219183