Image system problem

Similar Questions

• Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

  I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

  * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

  Hi jsserrano68,

  Read the following article about the product keys for Windows:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

  In addition, if you need to contact Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  Thank you

  Deb

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Replace the HHD with SSD as drive system problem...

  I hope someone can help out me!

  I want to improve 320GB HHD to the SSD on my X 230.
  I use mSATA as start the device identified as SATA2 (in BIOS).
  I replaced HHD DSS who is identified as SATA0 in BIOS.
  SSD is defined with the mSATA higher boot priority in the BIOS.

  Before moving to the SSD, I did a system image backup on external USB disk.

  When I start my X 230 with SYSTEM RECOVERY CD, it turns out that mSATA DISK0 and SSD is DISK1 and I can't get the image for the newly installed SSD.

  In fact, I did the same procedure that precedes. When I added mSATA, I followed the same procedure to retrieve the image system mSATA and it worked perfectly!

  What should I do?

  The easiest way to run an mSATA with a 'normal' car (HDD or SSD), the method is to remove the drive you want to boot from. Put the rest drive, restart, then the other disk (of data).

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.

• disable hardware acceleration set my image loading problem. is there another way to get around this?

  System details:
  OS: Windows 8.1 Professional (64-bit)
  Graphics card: PNY NVidia GT 610 (2 GB)
  RAM: 5 GB
  Firefox version: 36.0 (32-bit)

  Since yesterday, when the images would load on Web sites, some of them would be entirely black, or black for the most part, with only a piece of the images loaded, only to fully charge a few minutes later.

  Disabling hardware acceleration has solved this problem, but reduces the overall performance of firefox. Is there another way to work around this problem, not to mention that disabling hardware acceleration?

  Note: The only 2 things I have tried have been reset firefox and a new installation of firefox. I don't want to lose my data of the addon and the custom settings of firefox, because it takes too much time for me to put them back where they are now.

  I'm also pretty computer savvy, if you can get quite technical with me. If I don't understand something, I ask.

  
  

• imaging system in Windows xp and how to restore another different computer?

  I have a pc that works regularly, and some PCs are have the problem. I want to create the system image on pc that work and restore it on the other pc that do not work.
  help me pleas...

  As you might gather reply TrekDozer, restoring an image to different hardware is not a trivial task.  However, outside legal issues, software Acronis True Image (what creates disk images) can be supplemented by a feature that Acronis called "Universal Restore."

  Acronis claims (I have not used it myself):

  Ability to restore on a different - material Regardless of the brand, model or installed components of your new computer, Plus Pack restores all its good and due form.

  Acronis True Image Home 2012 is $ 49.99 and the module additional Plus Pack is $ 29.99.

• How to create an image system to the command prompt?

  I need to create an image of 'system' and I can't have accdess Wizard "backup and restore".

  Hi princesscontino,

  Thanks for the question.

  (1) what exactly happens when you try to access Wizard backup?

  (2) there was recent changes made to the computer before the show?

  (3) you have other programs of backup of other third-party backup programs?

  You can configure Windows backup to run any way you want and also to create a task in Task Scheduler to run the weekly wbadmin command to create the system image. For the sup of wbadmin commands, see http://technet.microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  You must run wbadmin from an elevated command prompt. (To open a command prompt, click Start, right click Guest and then click Run as administrator.

  "Wbadmin" command line utility and the utility is available only in Windows Vista Business, Enterprise and Ultimate editions and not in the Home Basic or Home Premium editions.

  You can also check: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• suggestions for an imaging system

  I've been procrastinating to do this upgrade in weeks, but my current installation of Vista is a little weird, with the views change randomly each almost whenever I have something opened in Windows Explorer. It becomes really upset me, so I just want to win7 as soon as POSSIBLE. I want something that will allow me to customize the way files are display AND STAY THAT WAY as Windows 95, 98 and XP. Even the panels of control, trash, and other such things change their format to display randomly. For the most part, they like to go to "icons medium or view one or two columns always the name, but the other varies." It is a separate issue.

  I was advised to the system of the image, but I don't own any imaging software. The only one I've worked with is Norton Ghost, and even if I had a copy, I couldn't use it. I don't have a drive external 3.5 "USB.

  I see an external USB drive of 500 GB on sale at Best Buy for $50, so I'm gong extinguish and purchse it. How can I use this drive to make an image of my current Vista Home Premium install with only the following available? I need a suggestion on what software to use, and how would I do a restore.

  Computer to be photographed:
  Gateway 4200DX, 64-bit quad core 2.4 ghz processor, 6 GB of RAM
  House Windows Pista 64-bit problems.
  580 GB main partition to be photographed
  a "recovery partition" brings her up to 650 GB
  1 DVD - RW drive, more USB ports. I don't remember if it has Firewire or not because I have all of these devices.
  Gigabit Ethernet, but I have no other gigabit devices including my switch, so it's actually the only Fast Ethernet.

  Other computers:
  Acer Inspiron laptop, exact number I forgot.
  1.7 ghz dual-core processor, 1 GB of RAM
  Windows XP Professional, Windows Vista 32-bit Home Premium can be reactivated easily enough as I never took the trouble to delete the partition.
  2 USB 2.0 ports for external hard disk
  Less than 60 gb internal hard drive.
  Fast Ethernet connection (I think, could be gigabit after all. Is not serious because unless you are using a crossover cable, I just have a fast Ethernet switch)
  slow CD - RW drive, I'm not sure speed accurate it is, but it often seems somewhere between 20 and 40. Definitely not better than a 40 X.

  Dell Optiplex GX110
  processor 1 GHz, 512 MB RAM
  Windows 98SE/Windows XP dual boot.
  1 hard disk 40 GB, 60 GB 1 hard drive is divided into a 20 GB and a 40 GB partition. Less than 10GB available on any partition.
  USB 1.1 ports. (It is old and used Win98 for a decade).
  XP complains that my flash drives could be faster if I connect them to a "high-speed USB" so I guess they are 1,1. They seem certainly to a transfer rate.
  * The machine to work only with a 3.5 "floppy drive. I can't move it to the new machine, because they have no floppy ports.
  CD-RW/DVD-R maximum drive write speed never burns with success, but maximum reading speed of 48 x works very well. Effective max 16 X or 24 X burning speed.

  So, I need something that I can use the material to the system image and still be able to restore it if I accidentally erase my data or find that I can't get the drivers to work. Any suggestions?
  Something with a low learning curve for someone who used to regularly use Ghost to his old job in 2007 would be appreciated.

  I use DriveImage years. I've never needed to restore an image, but occasionally the individual file was always available for recovery, when something is wrong. And it's free...

  Noel

• Unable to create point of system restore, System Image & System Repair Disk

  Hello

  I'm on HP Pavilion dv6 notebook, Windows 7 Edition home premium, (Intel core i7, [email protected] Ghz) CPU, RAM (4.00 GB).

  2 days back, I installed kaspersky IPSec 2016.

  After installation of this I started to experience different startup issues as initially I wasn't able to open the application (word, excel) Microsoft, infact I wasn't able to work on any application, even could not shut my system.

  today when I started my system again to check again the question that I was surprised to see that I could access my Microsoft & other applications.

  As a preventive measure, now I want to do system restore, disk image point & system repair disk but unfortunately, I am not able to do this.

  Here are the problems I face to create above.

  1 system restore point - specified error as ' restore point could not be created for the following reason: a volume shadow copy service component has encountered an unexpected error. " Check the event log applications for more information (0 x 80042302)

  2. System Image disc - error indicated as "Windows cannot find device backup on this computer. A volume shadow copy service component has encountered an unexpected error. Check the event log applications for more information (0 x 80042302)

  3 system repair disc - of the errors illustrated as "system repair disc could not be created. The parameter is incorrect. (0 x 80070057).

  Pls advise.

  Thank you for the update from us.

  The message you get may be caused by a corrupted system file. We offer you to perform analysis DISM that can help resolve the corruption of Windows error.

  Let us know how it goes.

  Kind regards.

• Cannot creat Image system (Acer Aspire)

  Hi all its my first question to post here. I decided to do since I tried the other suggestions of different forums but nothing helped.

  We have this Acer Aspire x 3900 WIN 7 Home Premium 64 - Bit 6 GB of RAM 1 TB HARD drive (partitions of 2 - C:300 and D:700 Go. Problem is that I can't create system external HARD Disk Image

  Error:

  Cut due to a device error in the volume of the source or the destination volume. SE of origin or of destination and on a disc.

  run Chkdsk / R on the volume, and then try the operation again. (0x8078012D)

  More information...

  Cannot run the application because of an error i / O device. (0x8007045D)

  Help, please

  I tried below, but still does not.

  running chkdsk of source and destination HDD

  sfc/scannow

  checked the option "allow the files on this drive to be indexed.

  http://www.YouTube.com/watch?v=oSdWDHY3F2I

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/system-image-backup-error-IO-device-error/0c2c6efa-9cd1-4D41-B509-63993150abab

  etc...

  Hello Levis,

  Thank you for joining and offering us the opportunity to help Microsoft Community.

  Do you have any third-party software backup installed on the computer?

  I appreciate that you've tried several troubleshooting steps before posting for us. I would ask you to try the advice given by JRChicago June 9, 2013 in the link provided below.

  System of image 0x8078012d and 0x8007045D errors

  You can also download and run the check disk utility provided by the Acer Support. See the link below for the download link.

  How can I test my hard drive?

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

• RAW image workflow problem

  I met a strange behavior on the Minolta RAW image processing. (This strange behavior has occurred for the first time in the last series of images. I have used this workflow at least a year.)

  Minolta RAW is not recognized by iPhoto so I used Adobe DNG Converter to produce DNG files.

  The original RAW files typically were 12.1 MB on the disk. DNG files vary in size, but were usually between 7 and 9 MB, but strangely, the dimensions are given in 256 x 192.

  When they are imported into iPhoto, the definition is, as you'd expect, is not good.

  If I edit a DNG file or iPhoto using Photoshop, then save them on the desktop as the jpeg, the result is a file which is usually 5 MB in size, but the dimensions are 3264 x 2448. This file can be re-imported into iPhoto and the results are perfect.

  Of this, I infer that the camera records the data correctly and that it is stored in the file, but what went wrong during the conversion from RAW to DNG?

  Thanks for any help.

  Jim,

  I can't reproduce the problem, because I work with Windows. This seems wrong; I hate it, when the software is being too intelligent and prevents from functioning correctly. Adobe also makes this rubbish, for example keeping the ACR adjustment settings in a database.

  I'm sorry but I can't contribute to the solution. I thought that the problem is in the content of the DNG file, but it seems to be in the records of the IPhoto. I did a search and found that when you import photos into IPhoto, it opens each image and creates several smaller of the versions. However, I am sure you know much more about what I am doing (as it is as I know about this).

  Anyway, have a good year and a best photo management system.

  GAbor

• Since the installation of FF36beta to win 10, saving images has problem

  Hello

  Installation FF36beta, recording images having the problem, so when I select the folder and click on save, it will goes to savings but not saved and all time show 'unknown time remaining' and not made progress. but when I close Firefox, the next performance after a few moments, the image will be saved.
  I have tried to find the answer for fixing, clear history of downloads, disabling the addons Manager download, but are not fixed.

  I use windows 10 and since I installed windows 10, my browser FF 36 beta + updates.

  the problem has been fixed in the beta of FF 36 10

• Update of Mac app Store system problem

  Hello

  I have a problem with my Mac App Store. It displays some system updates (Safari 9.1 update secrurity 2016-002 7.2 command line tools 10.10.5)

  but it doesn´t install those. I can click on update, it starts for a few seconds and then nothing happens.

  I even downloaded it from apple, but this doesn´t never work.

  Any help will be much appreciated.

  Thank you much in advance.

  Greetings

  Daniel

  Try to manually download this update from the drop-down list. If all goes well he'll fix everything that's wrong with your kit.

  Download update of OS X Yosemite 10.10.5 Combo

  By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.3

• Qosmio X 500 - 11U restarts when games &amp; cooling system problem message

  Hello

  I have a Qosmio X 500 - 11U PQX33E, bought in the summer 2010. Since 2012 (1 month after the warranty ended) he started to do restarts without reason, but I gave much attention to it, as it happened rarely. However, after 1 year things are worse and I ended up having a cell phone game that I used only as a PC Web browser. From time to time, I blew the fans to clean... Finally, I decided to fix it.

  I gave it to a technician, he cleaned, replace the dough thermal CPU - GPU and replaced one of the fans who did not work properly.

  Still nothing has changed. I tested it again (by running windows experience rating), and it crashed as before.

  I made the big decision to go back to factory settings and I made a clear installation of all components of the system (including the stuff of all the toshiba).

  Restart again for the note windows. ... (the same thing happens when I run any high graphics games)

  I have flashed the bios to v2.90

  Restart again for the note windows. (the same thing happens when I run any high graphics games)

  In addition to the above, because I did the clean install of the system, I started to get the message ' WARNING: a problem with the cooling probe happened... return it for service.

  I can hear the fan is working but when I run the diagnostic tool for Toshiba, the CPU usage is at 50% and the fan to 0%, even in use high power (yes I changed both power settings)

  Any help would be much appreciated, because I really feel VERY bad after paying 2500 EUROs for a gaming computer I can not operate for its intended use.

  Thanks in advance

  However when I try to run all 3D graphics applications (and some flash feature facebook games) it blocks (auto-off)

  The laptop turns off automatically in order to avoid the damage hardware parts... which can occur due to a higher internal temperature...

  You mention that the fans do not work

  (use of fan is at 0% because my fans are now connected to the USB ports

  I suppose that the temperature rises and the laptop turns off because cooling fan use in 0%

  To me, it looks like a typical hardware malfunction and from my point of few service technician must verify and fix it... here in the forum, we can only talk and discuss possible solutions but finally the hardware problems should be fixed by engineers of the service...

• Anyone who doesn't know how to fix this image backup problem?

  Try this post once again in the hope of getting an answer this time

  I continue to have this problem where Firefox is slow to respond during the recording of the images.

  When the problem occurs, and it does not happen often, I'll either ctrl + s or right-click, select "save image under...". "and after I click 'Save' I see it at the bottom right

  "One active download (remaining unknown).

  All the time which shows, Firefox is slow to react. As soon as he goes, Firefox is fine.

  Why Firefox is and what I can do about it?

  Also, why Firefox re - upload images to save them? Why can't we just save images by copying them from a cache, they are stored in display them in the browser window?

  I know of this add-on https://addons.mozilla.org/en-US/firefox/addon/3404/ and I, but it is useful when I want to record multiple images in a folder. When I want to, for example, save an image of 'good work', the other "wallpaper," the other "show family" and so on, it is heavy.

  This can be a problem with the anti-virus control that Firefox runs, calling your AV software once the download is complete.

  See http://kb.mozillazine.org/Unable_to_save_or_download_files