Implement the json JWT with labview web token

Similar Questions

• How to save all the files associated with a Web site?

  I'm an administrator (but not the creator) of a Web site that I am responsible for the update. I don't have the documentation that I need to do some of my tasks. So I thought that I could find enough simply to save the site from Firefox.
  The last time that I have this (several versions of Firefox there is), there is a command "save under" which would save the main HTML file in your selected folder AND save all the subsidiary referenced files in a single subfolder, so built a local version of the site.
  When I tried this today in v20.0.1, the two options "Save As" only created a single file of the current page with all the original references links on the left.
  Is there another way to 'dumping' of the entire application on my hard drive?

  I initially save as "Web Page, complete"? , but the hrefs all mentioned on the real web site, not to any local versions.

  I also tried the Scrapbook addon. It does not seem to do what I want, but I can't find where it stored all the files. I'll be back with the author of the album.

  PS. Why can't I find setting controls in shape when you enter a question?

• Saving the JSON files with Notepad in UTF-8 format causes error in Unflatten of JSON VI

  After doing a flatten to JSON and write in the text file, I open the file in Notepad and edited one of the fields. Then I registered under and marked 'UTF-8 '. The function JSON Unflatten fails with the 375003 error "the JSON string is not valid. The JSON strings must be encoded in UTF - 8 and must conform to the JSON grammar.

  I did change the numerical value in the field. Does Notepad save not a 'real' UTF-8 file? Someone else had this problem? Which makes it pretty hard to let users to change if the software cannot read it.

  Notepad adds a BOM header said at the beginning of the text file. This indicates a conscious drive UTF UTF type so boutien multibyte UTF encodings (e.g. UTF-16, UTF-16BE, UTF-32). Unfortuntaly notebook is so 'smart' to do it seamlessly and without any notification.

  If you use Notepad ++, or any other smarter text editor, you can avoid this problem of having this BOM autmagically added to the file to save.

  Basically, UTF - 8, you get three codes hexadecimal 0xEF, 0xBB, 0xBF at the start of the file. You can read the file yourself and check these three characters in this order and remove them if they exiist, before passing the string to your string in JSON format Unflatten and everything should be good.

  See here for more details on the UTF BOM.

• How to implement the wafer map using LabVIEW?

  Hello LabVIEW Masters!

  I have a project which includes control and searching for information on a PROBER. One of the difficulties I have now is how to implement a WAFER card using LabVIEW. According to the requirements of my client, the element of pads varies between 6 k and 23 k. I guess that do everything (a = a ctl/indicator led) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have a better idea on the way whose that?

  Please, I seriously need your help...

  Thank you and best regards,

  Dennis DG

  Hi Dennis,

  This wafer GerdW post card appears to me as a sort of histogram (for example http://www.ni.com/white-paper/4158/en#toc3);

  Altenbach post well this example that shows how to use a plot of intensity to create a 2d histogram:

  http://forums.NI.com/T5/LabVIEW/overlay-plots-as-intensity-graph/m-p/211222#M119248

  Learn how it works and try to adapt it to your specific task.

  Alex

• Application errors of the RT with the PXI-4461 with Labview real-time 9.0.1, DAQmx 9.0.2

  HI -.

  I recently converted a PXI time system real OS (PXI-1042 q chassis, controller PXI-8187, DAQ, PXI-4461, DAQ, PXI-6259). I can write and run DAQmx applications in real time with the 6259 very well. Whenever I try to write a labview RT app to use the 4461, however, it will fail. Note that I can use two cards through MAX I tried switching card slots, just in case it was a problem. Both cards worked with labview, the PXI chassis was before Windows.

  Attached are pictures of the screw base demo I built to show the problem. Since I was a mistake (-200758) if I started from the raw strings, I tried to create a MAX task and use it. The task, but he complained of a buffer is too small. I explicitly put the buffer to work around this problem and still get the same error (-200608). I've also attached a screenshot of the software currently on the Max MAX RT PXI system is version 4.6.2 btw. (I installed the most/all this from DS1 Dev Suite 2010 version).

  Please let me know if I hurt something installed, versions if 4461 just don't play nice with the new BT or RT software, or if something is wrong. Thank you.

  Kregg

  The first error you see is (details in the help-> error explain in LV)

• How to access the pci 9054 with labview

  Using pci9054 for communication, how can IAM I configure pci 9054 with labview.

  Thanks for your reply,

  I have 6 months experience in programming.

• Is it possible to open several tabs at the same time (with some Web sites on the tabs) by simply using an icon?

  I have several Web site tab groups that each would open by double clicking a single shortcut.

  For example: when I do my banking online, I would like to open a single shortcut, and then that would open all of my banking sites, each in a different tab.

  Do you mean start via a shortcut on the desktop?

  You can add all the URLs on the command line, separated by a space.
  
  If the list is too long, so you must use a firefox.cmd file to start Firefox with all sites.

  • http://KB.mozillazine.org/Command_line_arguments

• Unable to connect to the generator signal with LabView

  Hello

  I use a Tektronix AFG 3021 B signal generator. I installed the National Instruments driver (tkafg3k) for this device. My computer is connected to the signal in the block diagram generator, I place a block called "Example - Getting Started vi". I run the vi (there is no need of connections, so the vi has just the one block).

  The vi then gives me this error:

  Error 1073807343 has occurred to be initialized with Options.vi of tkafg3k
   

  Possible reasons:

  Driver status: (Hex 0xBFFF0011) primary error: error (Hex 0xBFFF0011) - information on the inadequate location or a resource that is not present in the system

  I know that the signal generator properly communicating with the computer because when I run "VISA Resource Manager", I can ask for the name of the device and it returns the correct name.

  -I'm using Labview 8.6.

  -I have NI-VISA installed 4.2

  -The driver that I use is available here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=005994E37F5B2318E0440003BA7CCD...

  -J' use the driver that is for version 7.1

  -J' uses this compliance record: http://joule.ni.com/nidu/cds/view/p/id/1095/lang/en

  What is the cause of this error and how can I solve this problem?

  Thank you.

  -Zach

  Do you really need to use the IVI driver, or you can use the LabVIEW driver? If you have need of IVI, configure you the Max with a logical name, etc.

  PS You have posted to the wrong Board. It is for the signal generators of NOR. You should have posted to the Instrument of narcotics control.

• Use the DAQCard 1200 with LabVIEW 2009 map

  Hi, I have a DAQCard 1200 and LabVIEW 2009 card. Can I use this device with this version of Labview? Is there anyway to make it work? Thank you.

  Hello ACTS,

  There is a difference betweenmx and traditionalDAQ DAQ!

  Installation of NI - DAQ6.9.3 is ok as outlined in this KB entry link above.

  But: you will find all of the DAQmx like this "DAQ Assistant" features! (Btw. why you insist on the use of ExpressVIs?)

  You must use the TraditionalDAQ functions instead. (There should be a few examples too...)

  Yes, DAQmx does not support your DAQCard1200. But TraditionalDAQ6.9.3 will do...

• How can I fix a display problem that appears only on the FireFox browser with my Web site?

  The issue resulted in the attached screenshot is located at http://www.onhold123.com/on_hold_voices.htm. You will see that the dividing line runs in the background.

  You create this page by hand? You can use level block such as p or div tags to contain your litters. It will simplify some style issues.

  Anyway, the separate line is winding upward under the text because the text is not big enough to force the line down below the floating image. You can disable this type of packaging by adding using the clear property.

  Please visit this page for more information: https://developer.mozilla.org/docs/Web/CSS/clear

• How can I implement the family sharing with separate billing?

  I want to implement sharing of the family, but would prefer that the purchases made by the members of the family have been charged to their own methods of payment rather than mine (as a family organiser).

  When family members purchases will be deducted from the balance (if they have a), or taken from map of the organiser (if they do not have a balance or if it does not cover the purchase, in which case the excess will be charged at map of the Organizer), a member may not use their card for purchases (and any balance on the account of the Organizer cannot be used).

• Analysis of impedance with the Keysight E5061B with Labview Network Analyzer

  Hello world

  I hope that all do you well,

  I need to configure and to measure the impedance in E5061B monitor using labview, I have some scpi commands and. VBA file I don't know how to use them

  can someone guide me how to measure impedace, Z-parameter

  SCPI parameter:http://ena.support.keysight.com/e5061b/manuals/webhelp/eng/programming/command_reference/command_fin...

  Thanking you,

  Kind regards

  Violet.

  Start by manually setting the device and do pay attention to the front panel of the instrument parameters. You should be able to map to the functions of the SCPI. The driver can be sought for these functions. Make sure you ave than on context-sensitive help. If you can't find a function of the driver that does exactly what you need, you have the source code.

• Cannot publish the FTP site with TypeKit Web fonts

  When I publish on Business Catalyst, I can see the fonts I used. When I publish the FTP host, my TypeKit Webfonts are not used.

  Marc

  The Ste URL or domain you specify in the dialog box of Muse FTP must be "www.excelendeavormedia.com" because it is the server that should be able to use Typekit fonts, as well as the page. Keep in mind, this has nothing to with the FTP process itself!

• How to create a 404 with LabVIEW web services page?

  Hello community,

  I guess the question says it all... I have my site up and running, but I would like to create a default 404 page just in case the user mistypes something. How can I do?

  Thank you!

  
  

• Impossible to implement the loan boost with my 4 GB memory card.

  I have an exactly 4 gb usb/memory card and when I put it in my computer it won't let me not ready he thrust? can someone please. Thank you

  original title: ReadyBoost

  Don't worry, it seems to work now, but I really enjoyed your attempt to help. Thanks :)