Impossible to activate VIsta printer sharing

Similar Questions

• Impossible to activate Vista, error: product already in use.

  Original title: activation of Vista.

  I'm trying to activate my vista Home premium on a new drive hard asmy old hard drive failed, but he repeats to me product already in use! How can I activate my product now? as I said I had it installed on a different hard drive but that didn't need now to activate the product on the new hard drive!

  Check how to activate Vista in tribune, here:

  http://support.Microsoft.com/kb/940315

  Tom Ferguson

• Impossible to activate Vista Aero on Satellite L300-15v with Intel processor

  I installed Vista for my Satellite L300-15v, I bought without system.
  I can't put MORE memory for graphics (shared) memory which is between 0 and 256.

  Please inform me how to do this and if this is the reason why the Aero effects does not * or my pc does not satisfy the minimum requirements *.

  Note: L300 is celeron 2.13 | Graphics: Intel 965 - GMA X 3100, 2 GB of Ram

  Thanks in advance

  Post edited by: omda430

  Hello

  First of all, you should check if your version of Vista support Aero.

  Windows Vista Home Basic n t supports Aero.
  If you need a newer version of Vista to use this feature

  Please also check this page from Microsoft: [problems with Windows Aero | http://windowshelp.microsoft.com/Windows/en-US/Help/c33fe91a-9e6f-41f4-ae82-3ed2d5fa2fbf1033.mspx#EZD]

  Welcome them

• Impossible to activate Vista, error: 0xC004E003

  Original title: Windows Vista product key required after 5 years!

  I've been running Windows Vista for nearly 5 years, pre-installed on my PC.  Last week he charge upward and said I had to enter my product key that I was not running a genuine version of Vista.  I entered the key, but every time I go there I get the error 0xC004E003 Code.  I have not updated my motherboard and the only change to my hardware was an upgrade of RAM 2 GB for more than a year.

  I'm under SP2 with all the latest news system installed.

  What I really need to buy a new product key/upgrading to Windows 7 (I hope not that the budget is very tight) or is there something obvious that I'm missing?

  Hello

  I suggest you to see the link:

  Error message when you try to activate a copy of Windows Vista: "the Software Licensing Service reported that license evaluation failed: 0xC004E003".

  http://support.microsoft.com/kb/950755.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

• Impossible to activate winodws updates on Vista Home

  I have the question googles; tried the Microsoft fix filoe but impossible to activate Windows update

  Hello

  (1) what happens when you try to activate the update? You receive an error message?

  (2) who is the Fixit you tried?

  (3) when was the last time it worked?

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and install the updates.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2 : Reset Windows Update components and check with the question.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows

  Method 3: Run the system update tool and install updates.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  If the method above does not work, proceed to the next method.

  Method 4: Perform a full scan of the computer using the following antivirus applications and try to install the updates.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• Re: Satellite A350 - cannot activate Vista

  Hello world

  I have a problem and hope someone can help me.

  After two years I had to reinstall my computer laptop satellite with windows vista. Here's the problem that the productkey is not readable. So I used a little program (productkey86.exe) out of the registry. So far so good. So I installed vista with this productkey but now my computer is telling me that I need to activate. When I try to activate microsoft says: impossible to activate the product.

  Does anyone know what I need to do?

  Hope to hear from you soon...

  THX

  Edwin

  Hey,.

  The problem is that the key on the lower side is an OEM license key and doesn t work with normal Vista installation diskettes. So that s the problem why you can t activate your Vista installation.

  You wrote that you have a Vista installation disc. Why you n t use the key that belongs to this disc? This would work ;)

• Problem to a file/printer sharing network.

  Hello

  I want to do a network to share files, printer and internet. I have already shared the internet by all connection to the access point devices through wireless and connecting the access point to the cable modem, but I can't share any file or folder.

  I tried many things to create a small network of win xp, but I failed.

  I have a wireless access point Dap1150 D-Link wireless modem 1 billion for the ADSL2 +, a PC (win xp) with a normal network adapter and an external wireless LAN adapter + a laptop (win 7) which has two cards and support network wi - fi.

  Please help I have searched a lot but I couldn't find anything useful.

  H

  Assuming that the "billion for ADSL2 wireless modem + ' is a router, and it is configured as one.

  Since you have a Windows 7 computer too, the network must be configured take into consideration.

  -------------------------------

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I network a Mac and a Windows 7 set for printer sharing computer?

  I have a desktop computer with Windows xp, 32-bit, one with Windows 7 64 bit and a Macbook, can I configure them on a network to share a printer using my wireless D-Link hub?

  original title: home network

  Hello

  I suggest you to see link below and check if it helps.

  Networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows-vista/Networking-home-computers-running-different-versions-of-Windows

  Install a printer on a home network: http://windows.microsoft.com/en-US/windows-vista/Install-a-printer-on-a-home-network

  File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/File-and-printer-sharing-frequently-asked-questions

  Hope this information is useful.

• Why anyone cannot repair vista print spooler errors?

  many 'experts' both 'fixes' so much useless information... I can't be alone in here... I tried every recommended around work
  of all the sites I find... and always impossible to add a printer on a vista 64 pc!

  Hello

  1. What is the exact error that you are experiencing when you try to install the printer?

  2. What is the model of the printer, and who is the manufacturer?

  3. What are the steps that you have tried to solve this problem?

  4 is this a wired or a wireless printer?

  5. is it a standalone printer or a network printer?

  6. What is the exact error that you are experiencing?

  I would like you to explain to me so that we can help you in a better way.

  Method 1:

  I suggest you follow the steps mentioned below.

  a. click Start> select Control Panel> in programs and features> select turn Windows features On or Off.

  b. click + sign of Printing Services.

  c. Select LPD and LPR. You must remove the Internet printing Client. Restart your PC to ensure there is no error in the spooler service.

  d. try to reinstall your printer software/driver.

  Method 2:

  I suggest to stop the spooler service, then restart and see if the problem is resolved. Follow the steps mentioned in the article below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3:

  If you use a network printer, then I suggest you follow the steps mentioned in the article below.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  See the links below.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Printer sharing does not work for me

  I reply to a post by Mike in July 2009, about a difficulty to share a printer between a 64 bit vista computer and a xp one.  I followed all of the suggestions until I had to create a new port.  When I typed in the \\computername\sharename window indicated that the path is not found.  I tried several times but still the same results.  All ideas, (if Mike is still there) thank you

  Hi lashlarue,

  I tried to look for the thread that you responded to, but without result; could you please provide the link which you speak.

  What exactly happens when you try to share the printer? Do you get specific error messages?

  Please read the following

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

   

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.