Impossible to connect with Orchestrator Client

Similar Questions

• 'Impossible to connect with the activation server' while trying to activate Windows 7

  Stater of the i run windows 7 on a laptop dell inspiron N5050 32-bit, windows asks me to re-enter my product key each tome I get it it displays after loading: impossible to connect with the activation server, see other ways to activate windows, pls make serious saying my trial period has expired why it cannot connect to the server to check the product key? Help, please

  Original title: activate windows

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• New Vsphere servers (2), cannot connect with vsphere client

  It's strange, that it is a new construction on 2 new servers. With ESXi5 it really doesn't matter what config install so there is nothing to screw it up, so I did the installation of STD, then tried to connect to the server with the client and I get 'call 'ServiceInstance.RetrieveContent' to object 'ServiceInstance' on the server '10.70.1.20' failed.

  This happens on both servers.

  Other messages suggest it is because of the attempts to connect using HTTP instead of HTTPS, but I do not use a prefix, just the IP address.

  If I type the IP address of the server in a browser, I get the standard server ESXi web page so IP connectivity is fine.

  The other strange bits is that I have 3 ESXi 5 server to different hardware built using the same media that works well.

  The vi client log shows this:

  < type = "VirtualInfrastructure.Exceptions.ConnectionError error" >
  < message > the customer has not received a full response from the server "10.70.1.20". (The underlying connection was closed: an unexpected error occurred during the reception.) < / message >
  < InnerException type = "System.Net.WebException" >
  < message > the underlying connection was closed: an unexpected error occurred on a receive. < / Message >
  < InnerException type = "System.IO.IOException" >
  < message > received an unexpected EOF or 0 bytes of the transport stream. < / Message >
  < / InnerException >
  < Status > ReceiveFailure < / status >
  (snipped)
  If I enable SSH and SSH on the server, try PuTTY gives me an error 'incoming packet was scrambled on decryption.
  It seems therefore that encryption is screwed somehow, but since I can't connect to the server I'm strugglin for troubleshooting options?
  Any ideas?

  https://www.VMware.com/support/vsphere5/doc/vSphere-ESX-vCenter-Server-50-release-notes.html

  From the release notes:

  Using the env of BE2/BE2 Emulex Group (pilot be2net)
  When using vSphere 5.0 with Emulex BE2/BE3 NIC (pilot be2net) in an environment FlexFabric/Flex-10 HP or IBM Virtual fabric adapter (VFA), connectivity may not work properly on virtual machines Windows or server when them VLAN is configured.

  Workaround: Do not use the driver included with vSphere 5.0. Before the upgrade to vSphere 5.0, you can get an updated of Emulex, HP or IBM driver that should be used on HP FlexFabric/Flex-10 or IBM VFA systems.

• ESX4 starts - but takes at least 20 minutes before I can connect with vsphere client!

  Currently, three servers of ESX4. Two months ago, a loss of power and of the restart. Server #1 initialization until the connection to the console without problem. Unable to connect to the server using client vshpere immediately. After 20 minutes, the vsphere client connections began to work.

  Although nothing of him until the #3 server went down today and restarting system apparently came to the console ok, but took 40 minutes before I could connect to it with vsphere client!   Y at - it something stupid I'm missing here? I have not tweaked these boxes, plenty of stock and NO settings have changed since its installation. They never used to take this long!

  Any ideas?

  I'm going to this post too, just in case

  http://KB.VMware.com/kb/1012942

• See 4 and VM Windows 7 x 64: impossible to connect with the customer to view

  I have Win7 x 64 VM.

  There was a lot of questions during the installation of the Agent from the view.

  Now, I can not connect to it with View Client. PCoIP shows me black screen, RDP-connect "all sources of funds are occupied."

  
  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

  Anton,

  Desktop 64-bit are not supported for view 4.0. Please see http://www.vmware.com/pdf/view40_admin_guide.pdf for the full list of desktop operating systems.

  Mike

  (Apologies for the exact same about three threads)

• Connection with the client VPN for RV110W problem

  Hi guys: I just installed a RV110W router to my small business and I try to connect via VPN from home client.  I was unable to do so, no matter what I try.  Relevant information:

  1. I can connect to the router via remote very well management, so I know that the router is accessible from the Net.

  2. internal address of the router: 10.81.208.1

  3. active PPTP.  PPTP server IP address: 10.0.0.1

  4 IP addresses for PPTP clients: 10.0.0.10 - 14

  5. two VPN clients added - one with PPTP, with the QuickVPN Protocol Protocol.  Both are enabled (and Yes, I triple checked passwords)

  6 encryption MPPE and Netbios active.

  7 IPSec, PPTP and L2TP all active gateways.

  8 VPN client: 1.4.1.2

  9. computer: laptop running Windows 7 family (64-bit), with the firewall Windows is activated.

  10 home network: 192.168.2.196

  It is causing to tear my hair out.  What Miss me?

  Shannon

  Hi Shannon,

  I am pleased to see that you're progress.

  Shannon Rotz wrote:
  I changed the RM port to 443.  Unfortunately, now I can't connect to the router via browser, either by remote management or from the local network - I get the usual "page cannot be displayed".  How do I get back into the router configuration GUI?
  

  You should be able to reach the GUI by typing https://192.168.1.1(assuming that you have not changed the default IP address) normally once you replace http (port 80) with https (port 443) the internal router web server automatically will redirect you to the https page if you type http. Open your command prompt and try to do a ping of the IP address of the router to ensure that it still meets this address

  With regards to the VPN client:   Up until I changed the port, the same error message kept coming up, i.e. "Unable to establish connection" (or something like that), with a list of possible reasons why it couldn't connect. Now the message has changed - I'm getting "Server's certificate doesn't exist on your local computer".  If I continue trying to connect, then it says "Activating Policy", followed by "Verifying Network", then "The remote gateway is not responding.  Do you want to wait?"  This is definitely progress, since I never got this far before.

  You are a quarter inch offline. If you look at the log.txt in C:\Program Cisco Small Business\QuickVPN Client, in my view, you will see "Failed to ping router remote VPN! This means that your PC is blocking the ping to the router response. Usually, if you look at this point the status of Client VPN in the router (first of all need to remote management) you will see that your user status is "connected." If the router thinks that the connection is established, but the PC does not work. You might want to try another PC at this stage to verify that it is indeed a problem with your PC. This problem is usually caused by the 3rd party software antivirus/firewall blocking the ping response. Microsoft Security Essentials can do this as well, so if you turn it off. If you do not have another PC to test from, call Cisco Small Business Support and ask a technician, try to connect to the lab. You can find the number to call here

  On an impulse, I tried setting up a Windows VPN connection, i.e. created a new VPN connection in Network and Sharing Center, using a PPTP client ID that I had created.  That connection actually worked, except for one problem:  I can't see the remote network.  If I could solve that problem, I'll just tell the other clients to use a Windows connection rather than QuickVPN.
  

  Good thought. If you do not see the remote devices, make sure that they do not block VPN connections. (Windows or third-party firewall, antivirus, antispyware) With a connection, PPTP or QuickVPN, you should be able to go to run, type the IP address of the device that you want to connect to (i.e. \\192.168.1.101 ) and see the list of shared folders. After the PPTP connection is established, try to ping the address LAN IP of the router. If it is successful, try to ping a LAN device such as a network printer or a PC. Again, PCs may block ping requests if they have a firewall running watch so for this.

  Answer please if you have any questions.

• create the connection with the client of sqlplus

  Hi@everybody,

  I have a little problem with the oracle Instant Client connection I installed on my Windows 7 64 bit. First of all, I have chips files:

  instantclient-basic - windows.x 64 - 12.1.0.1.0.zip

  instantclient-sqlplus - windows.x 64 - 12.1.0.1.0.zip

  and uzipped together in a directory. This directory is in the PATH in Windows 7 environment variable.

  Now I want to try to get a connection to my Oracle 11 GR 2 (11.2.0.3) database on CentOS. When I do an EasyConnect connection:

  QUICK > sqlplus system / pwdofsystem@hostname_of_db_server:1521 / NOM_SID

  There is no problem to get the database.

  But when I try along the way:

  QUICK > sqlplus "system @(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=hostname_of_db_server) (PORT = 1521)) (CONNECT_DATA = (SID = SIDNAME)))".

  First, he asks me the password for the system. I enter the password and then I get an ORA-12560 error.

  I already read about that mistake, but I can not understand, why I need an entry in tnsnames.ora file when I gave sqlplus all parameters directly. Or is there another failure?

  Thank you and best regards,

  David

  TAKE OFF THE UNIQUE CITY, you will be connected

  Run this without single quotes.

  PROMPT > sqlplus system @(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=hostname_of_db_server) (PORT = 1521)) (CONNECT_DATA = (SID = SIDNAME)))

  I guess if you spend the whole ting quotes, sqlplus is consider as a single 1 setting and assuming that the whole thing as username.

• Problem / connection with the client to view

  Our assessment notice.

  View Manager: 4.0.1 build-233023

  Discover the composer: 2.0.0.210930

  Reviews: 4.0.1 build 2029

  So far so good. We have created a dynamic office and were able to deploy desktop computers. We use an ad group to allow users to this pool.

  To access desktop computers in this pool via the web portal is no problem, but when the same user attempts to use the Client to view we get a message that authentication has failed. In the View Manager events, I got these messages:

  1 (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) XXXX\YYYYYYYY: 18B0AC59A9A16F3F0158209FC1CC26) the user USER; USERSID:S - 1-5-21-nnnnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int; has disconnected from VDM

  2. (SESSION: E2C6C98C7A5AB8A624450E4B70DB9A78; 8 D) BROKER_LOGOFF: USER: 18B0AC59A9A16F3F0158209FC1CC26 XXXX\YYYYYYYYY); USERSID:S - 1-5-21-nnnnnnnnnnn; USERDN:CN=S-1-5-21-484522859-389107532-2199480311-219035,CN=ForeignSecurityPrincipals,DC=VDI,DC=VMware,DC=int;

  The strange thing is, I left all this next door for a few minutes and tried to connect via Client discovered again later. This time, it worked, but at the opening of the session of office (office of screen already appeard) closes the windows desktop without any message. After you start the Client view again, the authentication will fail again.

  Time is synchronized in all entities.

  Any ideas, tips, solutions?

  
  AWo
  
  VCP 3 & 4
  
  \[:o]===\[o:]
  
  = You want to have this ad as a ringtone on your mobile phone? =
  

  = Send 'Assignment' to 911 for only $999999,99! =

  What ESX version are you running?  They had the 4.0 update number 2 with PCOIP, http://kb.vmware.com/kb/1022830.

  The opening of autologon, I guess that we refer to log in as current user box?    I have seen issues where if I leave my PC to the top and running for long periods of time it fails, but a simple reboot fixes this problem.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Impossible to connect with users using LDAP

  Hello guys

  We recently did a new install of 11.7 OBIEE

  When you configure the protocol ldap everything works fine, I can see the LDAP users and most of the users can connect to the front with the correct permissions.

  Some LDAP users are unable to log on for some strange reason, I don't know the user name and password of the user is correct because the same user can connect to our old environment but not our new.

  Someone knows this problem before?

  Concerning

  Benoit

  Have you tried with the user at the bottom and top case id?

• Impossible to connect with exsisting last word, how can I change to a new password?

  I have 4 email accounts Thunderbird, all work except this one, the password that I noticed will not work. I would like to change a different password, but do not know how to do this. Thanks for any help

  Your password is your provider. To actually change the password that you would work with them.
  Go to the webmail providers page and see if your username and password will work here. If they do then if it is something other than the origin of the problem.
  If it is a gmail account, it might be their option of apps less secure that you need to activate.
  It could be the wrong server settings. Get an up-to-date list of your provider and check what you have in Thunderbird.

  You could try to erase the passwords stored in Thunderbird and returning to them.
  https://KB.wisc.edu/page.php?id=19006

• Impossible to connect with the correct password

  I happily use my computer and connect using recognition of fingerprints by truesuite access manager, and then all of a sudden I turned on computer, and it says "Please login by password and register your fingerprints. Typing in what I know, it's the right password, he still refuses to connect.

  Anyone know how I could resolve this issue?

  Thank you

  Hello

  First of all, you need to give us more information on your laptop model and the operating system.

  And what exactly happens if you type the password? You get an error message or something else?

  Do you have that something has changed on the system before you rebooted? Have you installed any updates?

• OfficeJet Pro 8600 more impossible to connect with USB or wireless

  Using Windows 7.

  Printer was working fine on the wireless, then it ceased to be able to scan.  So I introduced to USB - all good.  Then stopped scanning.

  So I tried to unintstall and reinstall the software/drivers. Came to screeen where I'm supposed to create the USB connection, plugged into the USB port, plug-and-play software could not find two of the three drivers, nowhere to go.  Yet once uninstalled and tried Wi - Fi.  Printer is connected to the network without problem, but the computer cannot find the printer.

  Have you tried upgrading the drivers on devices - without success Manager, even though I directed it to the installation disc.  Then I tried to uninstall the printer on Device Manager and reinstall the software.  Nope.  Also several printer and computer, router reboots.  Nothing works.  If the printer at the moment doesn't help.  Thanks in advance for any help.

  Subsequently solved myself.  (Thanks for literally nothing to this forum of discussion.)  East went to the pages of HP.com support and firmware downloaded/installed, software, drivers and convenience store - everything I could find for this model.  In other words, I did not rely on plug and play to find the drivers for me, to which he seemed unable to do.  After installing everything that I ran to the resolution of problems and everything was good - computer could see the printer for a working network connection.

• Vshphere Client 5.1 can't connect with esxi 5.0 and earlier

  Hello

  I am facing a strange behavior I me client Vsphere updated 5.1 but now it is impossible to connect with esxi 5.0 and older versions. When I try to connect to an earlier version of esxi it show me update popup but unfortunately on this machine I can't connect to the Internet ihave manually download a patch?

  Talha Correia

  Hello

  You must download and install the client on your computer.

  You can find in the download section of the website of VMware vSphere.

  It comes to 5.0

  https://my.VMware.com/Web/VMware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_0

  Francesco

• Connection with Hulu with ATV 4, is impossible.

  It is impossible to connect with Hulu with ATV 4,!. Can do with the iPad Air2 without problem. Using the same DNS settings on both. I can directly airplay Hulu at ATV4, but not the ATV. Help please!

  DNS settings being that the same are not a guarantee that they are correct, you need to use the settings provided by your ISP, so just to leave them on auto. What exactly happens when you try to watch. You use the settings to the correct location.

• Windows XP SP3 with view Client 5.1: unable to connect: discovers the connection connection to the server has failed

  Hi guys,.

  I need help.  I have a problem with my opinion of Client on a Windows XP SP3 computer.  When I click on connect, I get the following message immediately:

  "Failed to connect to the view connection server. Verify that the server connection mode address and network settings are correct. »

  A few details:

  My client's IP address is on the same subnet as the view connection server

  There is no firewall and DNS solves the login server see very well.  Here is the output of my customer's orders

  C:\ > nslookup X.X.X.172

  < resolves very well >

  C:\ > nslookup dd - view.viewdomain.com

  < resolves very well >

  C:\ > nslookup dd-notice

  < resolves very well >

  C:\ > tracert X.X.X.172

  < works great >

  If I open a browser on the XP workstation which is a failure, I can go to https://dd-view.viewdomain.com.  It displays the page that I need to connect with View Client. What do I think, so this should check the connectivity between the two.

  I've seen customer 5.1.0 build-704644 installed on my Windows XP SP3 client computer

  My connection to the server is running 5.1.1 build-799444 and is configured with a pool of offices 25 clone related with SSL active

  LAST IMPORTANT NOTE: I have the same version of the Client view (5.1.0 build-704644) installed on another Windows 7 workstation on the same subnet and it connects to my view connection server office pool very well.

  I tried to install the three versions of the customer view of this system of XP SP3 including the latest version, when the connection after installation, they all fail the same way. My body needs to function. The client machines can not move to something more recent to Windows XP SP3 because I am not the administrator for them.

  Any ideas?  Is this a bug or is Windows XP SP3 just not supported with view 5.1?

  VR,

  Brian Whyte

  Political of McAffee HBSS blocked 443 attempts out of the customer to view.

  The difference is that the Windows 7 machine that worked was becoming another policy HBSS applied to what was not blocking attempts.