Impossible to control remotely

Similar Questions

• VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  Please suggest a solution.

  Thank you very much, it worked!

• I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.

  I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.  When I insisted on getting a phone on their part number, I shut down the computer, waited a bit and restarted again.  Everything seems normal, but I'm worried.  I had to give them a "id" so that they could take control remotely.  I have to worry about remote access to my computer now?

  I fell for the "eventvwr" scam and gave the appellant to control remotely from my computer.  When I insisted on getting a phone on their part number, I shut down the computer, waited a bit and restarted again.  Everything seems normal, but I'm worried.  I had to give them a "id" so that they could take control remotely.  I have to worry about remote access to my computer now?

  Remove all device has been installed to allow remote access.

  You need to change passwords on accounts and examine your computer and all data within being compromised.

  Your line of safer driving is to reformat/reinstall your operating system.

  You can also check the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-fell-for-the-eventvwr-phone-scam/8e79cd60-0a09-4ED6-85b0-056230878815?page=1

  Good luck...

• Trackpad acts as it is controlled remotely

  MY trackpad will not answer me, but the cursor moves as if someone has access to it remotely. How can I fix it?

  There are several possible causes for the behavior. Please take each of the following steps that you have not already tried until it is resolved. Some may not apply in your case.

  1. follow the instructions provided in this support article, so this one, as appropriate. A damaged or defective power adapter could be the cause, even if it's the right kind.

  2 simultaneously press the four corners of the trackpad and release. If there is no effect, it is likely to be temporary, and in this case the device must be repaired or replaced.

  3. disconnect or turn off each Bluetooth or USB pointing device, one at a time, testing as you go. You may be able to identify one that is defective. By a pointing device "," I mean a device that moves the cursor, trackpad, mouse, trackball, or tablets. A regular keyboard isn't a pointing device. If you have a desktop without a built-in trackpad design, at least an external pointing device must be active at all times.

  4. If your model has an infrared receiver for use with an Apple Remote, turn off .

  5. start in safe mode and test, preferably without launching any third-party application. If you do not have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you cannot start in safe mode. If there is no difference in safe mode, continue to the next step.

  6 reset the system management controller.

  7. If you use a mouse or a trackpad, Bluetooth, investigate potential interference sources, including 3 USB devices.

  8. a swollen in a laptop battery can encroach on the trackpad underneath and cause erratic behavior. If you have trouble clicking the trackpad, it is probably the reason. The battery must be replaced without delay.

  9. a faulty device or a damaged cable can cause the built-in trackpad to a MacBook to behave erratically. If you use the wired devices, disconnect them one at the time and the test.

  10. There is also a report of movement erratic cursor caused by an external display that was plugged in but not turned on.

  11. If you use transfer, disable it in the general pane of system preferences.

  12. If the mirroring of airtime to a TV is turned on, turn it off.

  13. If none of the above apply, or if you have another reason to believe that your computer is remotely controlled, pull it out of the network by turning off Wi - Fi (or your Wi - Fi access point), disconnect a Bluetooth network connection, then unplug the Ethernet cable or a USB modem, whichever is applicable. If the movement of the cursor stops at the same time, you should suspect an intrusion.

  14. an appointment of 'Genius' in an Apple store to do the machine or the tested external trackpad.

• control remote for PC

  I want to HP 700 - 500z PC with TV tuner, came with a TSGH-2401 remote control.

  Where can I get the instructions for the user to control?  I'm not familiar with the device.

  Do I have to install a TV signal antena?

  The remote is an infrared device, so it sends a signal to an infrared sensor on the computer. Yes to use the TV feature that you have to attach an antenna or a coaxial cable from the provider of pay-per-view television tuner at the back of the computer. Within the Cyberlink Media Suite, you should have solutions TV from Cyberlink. Windows 8.1 is more a Media Center feature rich, but I think that you can add it with a download from Microsoft. Once you join a TV signal to the tuner card and open the program it will guide you in the use of the remote control.

• privileges of admin., controlled remotely on p.c. that I bought (used) how deepen total control

  p.c., I bought used is installed on a network that a person has full control of remotely. I tried AFAIK short a complete sys destruct, I don't want to do. I was sent this person and explained new PC owners, but not luck. How can I free my PC from that

  Do a clean install every time you buy a used computer.

  You don't know what Malware, Keyloggers are installed on it.

  See you soon. Mick Murphy - Microsoft partner

• Best practices for controlling Remote Sites ESX servers

  Hi all

  I was wondering what the best practices or the options are for the management of the ESX servers in remote offices or branch.  I know that you can always use the VI to control on the site server, but what happens if you want to use some of the functions of the virtual Center?  How remotely manage and leverage capacity of Virutal Center in remote sites or branch offices, since you can't have Virutal Center installed in a domain.

  Other then a VPN dedicated to all remote offices or a branch is there another way to use Virtual Center to remotely manage the ESX servers in remote offices or branch?

  What are your current plans DR if the main site is going to host VC?

  You can run your VC in a VM and have power clone on a remote site or both incase of total failure.

  Then with the help of RCL etc. under the texiwill recommend and/or vMotion VM VC to other sites if necessary.

  Andy, VMware Certified Professional (VCP), http://www.vmadmin.co.uk/

  If you have found this information useful please give points by using the buttons at the top of the page accordingly.

• Impossible to control the volume

  Hello!

  I turned on my computer today and he said all of a sudden "* WARNING! "Cannot access Volume control *" at startup. I looked under _Sounds and Devices_ Audio under _Control Panel_ and he says: ' * no audio device. " I don't know how to solve this problem. Can someone help me please?

  Thank you!

  Hello

  What model of laptop do you have exactly?
  What operating system do you use?

  Have you tried to reinstall or update the audio driver?

  Please publish more details!

• Proposal to control remotely - Andorid App - Toshiba L 39, 4333 - TV

  I don't know where to post this proposal, I hope that someone from Toshiba reads this.

  Please if possible, on the remote for smartphones app add information about the intensity of the signal antenna, this application could become nice information feedback tool while adjusting the antenna, which is usually from a different location than television.

  Each Android application can be assessed in the play of Google's Android store.
  There, you can add some comments and suggestions for improvement unique about the android app.
  I guess it would be a better place to add this information.

• All the sounds of my event disappeared and have been replaced by a beep loud. Impossible to control via Control Panel.

  My sounds don't work anymore and the only noise I still is a strong signal. The sound is still very well when I play DVD, etc. I can't fix the sounds via Control Panel - I reapplied the sounds of Windows by default, but the problem persists. In addition, the beep does not disappear when I choose No. sounds or turn off the sound.
  This could be a coincidence, but this problem started when I tried to update AdAware and had an error of update that resulted in an error message reappears frequently interfered with Windows startup. I uninstalled AdAware and no longer see the error message, but still the beep.
  Thank you in advance for your help!

  Hello Ecate,

  Thank you for your message.  Take a look at the link below.  The beep question may just be the substitution of sounds of your system.
  http://blog.netnerds.NET/2007/05/5-ways-to-stop-Windows-Vista-XP-2003-from-beeping/
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to access remotely to Zoneminder on port 80

  I have a Cisco Linksys E2500 modem and I can't access Zoneminder which is basically a Linux video security DVR software package.  It runs on a Ubuntu Linux server.

  I have HTTP port 80 forwarded to the address static IP of the server Ubuntu but I repeatedly get an error indicating that the connection has expired whenever I try to access Zoneminder remotely as in access it remotely from a coffee shop.

  I have absolutely no problem to access the Zoneminder when I on my home LAN.

  I can access other software from remote sites on the parameters of the port 4369 with a favorite TCP protocol.  In other words, 4369 port is forwarded to an another Windows workstation with a static IP address assigned. Absolutely no problem with 4369 port forwarding.

  Also, I tried port 80 on the site, YouGetSignal, which is used to test port forwarding.  The Web site indicates that port 80 is closed.  But when I test port 4369, the site indicates that the port is open.  Zoneminder that uses port 80 is fully operational when I test port 80 via YouGetsignal.

  My ISP told me that they do not block the ports including port 80.

  Any help would be greatly appreciated

  Thanx

  Try the following steps:

  [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

  1] open the software and go to the option that says "settings of the router.

  [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

  [3] then click on disable SPI Firewall Protection Security tab, uncheck the box filter anonymous Internet requests...

  [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

• Impossible to disable remote VPN

  Hi Experts,

  I tried to disable remote access VPN in a SAA.

  ASA (config) # no webvpn
  ASA (config) # end

  ASA # sh run webvpn
  ASA #.

  I removed activate inside and activate an external command in webvpn. But still I'm getting the guest in client AnyConnect and when I try URL https I get the page with the error "file not found". How can I disable it completely?

  I don't want any web page when I type the URL of the VPN.

  FC

  Maybe you have other services that use port 443, as crypto ikev2 turn off customer service port 443, that this will make the ASA listening on 443 even if webvpn and http are disabled.

  By entering Show execution | in 443 you can check.

• How to connect JROCKIT mission control remote weblogic server?

  Hello
  
  "I have it here is my start weblogic setting" - Xmanagement:ssl = false, authenticate = false, port = 7091. I also got in managed01.out the message below: -.
  [JRockit] Administration server started on port 7091, ssl = false, authenticate = false.
  
  But, when I connect with this weblogic by providing the host and port, I am not able to connect. I am getting error then console opening below: -.
  Cannot open the GPMC for preproduction.
  java.rmi.UnmarshalException: error demarshalling return; nested exception is:
  java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
  at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:162)
  at com.sun.jmx.remote.internal.PRef.invoke (unknown Source)
  at javax.management.remote.rmi.RMIConnectionImpl_Stub.getMBeanInfo (unknown Source)
  to javax.management.remote.rmi.RMIConnector$ RemoteMBeanServerConnection.getMBeanInfo (RMIConnector.java:1031)
  at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:279)
  at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:314)
  at com.jrockit.console.rjmx.RJMXConnectorModel.initializeAttributeInfos(RJMXConnectorModel.java:294)
  to com.jrockit.console.rjmx.RJMXConnectorModel. < init > (RJMXConnectorModel.java:99)
  to com.jrockit.console.rjmx.RJMXConnectorModel. < init > (RJMXConnectorModel.java:113)
  to com.jrockit.mc.console.ui.actions.StartConsole$ 1.preConnect(StartConsole.java:36)
  at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:56)
  at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
  -Caused by.
  java.lang.ClassNotFoundException: com.vignette.monitor.framework.VgnMBeanInfo (no security manager: RMI class loader disabled)
  at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:371)
  at sun.rmi.server.LoaderHandler.loadClass(LoaderHandler.java:165)
  in java.rmi.server.RMIClassLoader$ 2.loadClass(RMIClassLoader.java:620)
  at java.rmi.server.RMIClassLoader.loadClass(RMIClassLoader.java:247)
  at sun.rmi.server.MarshalInputStream.resolveClass(MarshalInputStream.java:197)
  at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1544)
  at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1699)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
  at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:290)
  at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:139)
  at com.sun.jmx.remote.internal.PRef.invoke (unknown Source)
  at javax.management.remote.rmi.RMIConnectionImpl_Stub.getMBeanInfo (unknown Source)
  to javax.management.remote.rmi.RMIConnector$ RemoteMBeanServerConnection.getMBeanInfo (RMIConnector.java:1031)
  at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:279)
  at com.jrockit.console.rjmx.RJMXConnection.getMBeanInfos(RJMXConnection.java:314)
  at com.jrockit.console.rjmx.RJMXConnectorModel.initializeAttributeInfos(RJMXConnectorModel.java:294)
  to com.jrockit.console.rjmx.RJMXConnectorModel. < init > (RJMXConnectorModel.java:99)
  to com.jrockit.console.rjmx.RJMXConnectorModel. < init > (RJMXConnectorModel.java:113)
  to com.jrockit.mc.console.ui.actions.StartConsole$ 1.preConnect(StartConsole.java:36)
  at com.jrockit.mc.browser.utils.PreConnectJob.run(PreConnectJob.java:56)
  at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
  
  Please you finf the screen shot attached. I do not give any name of user and password as authentication is false.
  
  Thanks in advance...
  
  Kind regards
  Sanjeev

  Glad to hear it works for you! Have you tried starting a management console?

  Kind regards
  Marcus

• Impossible to connect remote with back to my Mac

  I already followed the instructions from Apple to set up my MacBook Pro (El Capitan) at home to enable Back to My Mac and when I'm at work That MacBook Pro of David duly appears under shared in the Finder.

  I must have done something right I can do split screen works perfectly by entering my username and password but I can't to connect under... work, whenever it says failed to connect.  I do something good like if I type the word password then immediately for this shimmer/shake to say it's a mistake.

  The domain name of my computer at home is Davids-MacBook - Pro.local and I tried to enter the user name:

  Anson Davids-MacBook - Pro. local\David

  Anson Davids-MacBook-Pro\David

  David Anson

  
  

  but all in vain

  
  

  No idea where I am going wrong?
  

  I can't use back to my mac, because most routers hotel will not support its use (when else would need her after all?)

  I have everything on computers configured properly.

  Back to my mac works fine in your own home-no, not so much.

• I have automatic updates set to download and allow me to install. has stopped working 4 or 5 months ago. Now auto installs updates when I turn off windows. Impossible to control as I used to.

  something changed with my automatic update process.  I have win XP pro, completely up-to-date.  I used the icon, do a right click Select custom, see what updates there and install them when I was ready.  no longer works like that.  Today, as yesterday for is, I see the icon it says XX % downloaded, the icon disappears and then it's as if I never had the update.  When I go to turn off windows he installs the updates received.  very inconvienent.  Any advice.  I checked my settings, always the same "download and draw attention to me..." "Thank you.

  Hi DavidSklover,

  Refer to the procedure described in the link provided to reset the windows update components and check if it helps.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  Let us know if this solved the problem.