Impossible to connect remote with back to my Mac

Similar Questions

• Can't connect to a computer with back to my mac

  I have a Mac Mini which I use as a Media Center, I want to control it from my macbook using 'back to my mac', both are running el capitan and the two ar completely updated. My router is an airport extreme 5th generation and is entirely up to date and all upwards completely.

  Successfully, I went through all the game instructions on the help sections.

  The Mac Mini is displayed in the Finder on my Macbook pro. I use the split screen, but I can not connect when you press the button "connect as".

  

  I can't login as a registered user, or with my apple ID

  I ve looked for an answer to this, but can´t seem to find a.

  I'd appreciate any help with where I'm wrong.

  Thank you

  Tim

  Can you connect to screen sharing when both machines are on the same network, bypassing the CCMM?

• How to: use desktop connection remote with windows 7 to windows xp sp3

  Original title : is it possible to use the new remote desktop provided with windows 7 to windows xp sp3 I want to use the audio options

  Hello
  Please I want to know if there is any way to use the new options included in windows Remote Desktop connection 7 update connection Remote Desktop in windows xp sp3 or as the RTD of widows 7
  is there a way please just send me email to * address email is removed from the privacy *.

  Thanks in advance
  hamadakhalaf

  Hello

  You need third-party software to do this, I suggest you use your favorite search engine and check for the software that supports this option.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out this link:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/a29f6207-4551-4AE1-941e-364919f50ad4

  It will be useful.

• I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

  Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Access PIX using SSH when connected remotely with VPN client

  Hello

  I think that this should be a fairly simple for someone to sort for me - I'm new to PIX configuration If Yes please excuse my stupidity!

  I changed the config on our PIX to allow only access via SSH (rather than via telnet as it was previously configured)

  Now, everything works fine when I'm in the office - I can connect to the PIX using SSH without any problem.

  However, if I work from home and connect to the office using my VPN client (IPSEC tunnel ends on the PIX firewall itself) I find that I can not connect to the PIX.

  I have configured the PIX to access ssh on the office LAN subnet and the client pool of IP addresses used for VPN connections by using the following commands:

  SSH 172.64.10.0 255.255.255.0 inside

  SSH 192.28.161.0 255.255.255.0 inside

  where the 1st line is reference to the office's LAN, which works very well, and the 2nd line denotes the IP address pool configured on the PIX for VPN access.

  Can someone tell me how to fix this? I have the feeling that its something pressing!

  Thank you

  Neil

  Try the command "management-access to the Interior.

• Back to my Mac works for you after the update to 10.11.4?

  After the update to 10.11.4 on my Mac Book Air I can't see my other computers at the office. I turned it works on desktop computers (yesterday that he would not allow it to work, but today it is) and the computers can't see each other in the Finder, even with restart Finder. Did someone else with problems of connection/browser with Back to My Mac?

  Hey brycesteiner,

  I understand that you have a problem with Back to My Mac. Let's see if we can get this sorted out.

  I would first start by taking a look at the article below to address the problem with the configuration of the router and the parameters of sharing on the Mac that you connect to.

  Get help using Back to My Mac
  https://support.Apple.com/en-us/HT203907

  Take it easy

• Causes of alphanumeric password iPhone SE keybord problem often react not so impossible to connect IOS 9.3.2,and so I went back to the code number 4

  Causes of alphanumeric password SE iPhone keypad problem often react not so impossible to connect IOS 9.3.2,and so I went back to the code number 4

  What is your question?

• 'Impossible to connect with the activation server' while trying to activate Windows 7

  Stater of the i run windows 7 on a laptop dell inspiron N5050 32-bit, windows asks me to re-enter my product key each tome I get it it displays after loading: impossible to connect with the activation server, see other ways to activate windows, pls make serious saying my trial period has expired why it cannot connect to the server to check the product key? Help, please

  Original title: activate windows

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Go crazy with connection remote sysdba in my config RAC

  Hello
  
  Sorry for this question sounds stupid but here's my problem.
  
  I can't connect to a dummy on node1 (for example) my cluster instance by using password file and the connection remote sysdba to prepare a DG config
  
  Here's what I did:
  
  Create a password file:
  orapwd file = $ORACLE_HOME/dbs/orapwSID password = mypassword entries = force 10 = y
  I have check the password file and that's ok
  Create a static entry earphone in the infrastructure of grid as follows
  
  Listener = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = Listener))) # line added by Agent
  LISTENER_SCAN3 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN3))) # line added by Agent
  LISTENER_SCAN2 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN2))) # line added by Agent
  LISTENER_SCAN1 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN1))) # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2 = ON # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3 = ON # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent
  
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = TST_DGMGRL.jkolicorne.fr)
  (ORACLE_HOME = oracle/grid/11.2.0.3.0)
  (SERVICE_NAME = TST_DGMGRL.jkolicorne.fr)
  (SID_NAME = TST)
  )
  )
  
  
  [grid@node1 admin] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on March 24, 2013 10:24:31
  
  Copyright (c) 1991, 2011, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
  Start date March 23, 2013 23:04:38
  Uptime 0 days 11 h 19 min 53 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /oracle/grid/11.2.0.3.0/network/admin/listener.ora file
  The listener log file /Oracle/gridbase/diag/tnslsnr/Node1/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.40) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.41) (PORT = 1521)))
  Summary of services...
  Service '+ ASM' a 1 instance (s).
  Instance '+ ASM1' READY State, has 1 operation for this service...
  Service 'TST_DGMGRL.jkolicorne.fr' has 1 instance (s).
  Instance "TST", status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  
  I create the entry in tnsname.ora as follows
  TST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = node1.jkolicorne.fr) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = TST)
  )
  )
  
  When I try to connect, I get this:
  
  [oracle@node1 dbs] $ sqlplus sys/Copine@tst as sysdba
  
  SQL * more: Production release 11.2.0.3.0 on Sun Mar 24 10:25:41 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  Enter the user name:
  
  
  I did the same configuration in one instance and it works very well, the only difference is the listener as follows:
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.88)(PORT = 1523))
  )
  )
  
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = TST_DGMGRL)
  (ORACLE_HOME = home/app/product/11.2.0/grid)
  (SERVICE_NAME = TST)
  (SID_NAME = TST)
  )
  )
  
  
  Any idea?
  
  Thnks a lot
  jko

  This is (at least partially) the problem:

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = TST_DGMGRL.jkolicorne.fr)
  (ORACLE_HOME = /oracle/grid/11.2.0.3.0)
  (SERVICE_NAME=TST_DGMGRL.jkolicorne.fr)
  (SID_NAME = TST)
  )
  )
  

  the ORACLE_HOME must point to the House of RDBMS, not the House of GI.

• Back to my Mac drive remote access

  I tried to set up my Time Capsule and the hard drive connected to it to be accessible on the internet via Back to My Mac. My Time Capsule is the main router and the modem to the ISP provided is in bridge mode. I followed the instructions of installation to the letter, but it still not connect when I try to on the internet. I tried to connect life iPhone tethering and friend home as well with no luck.

  Tried to help out a little and when I go to the iCloud tab in system preferences, I get the following message on the CCMM: Back to My Mac can be slow because multiple devices on your network provides network services. Turn off NAT and DHCP on one of the devices and try again.

  The problem is that NAT is enabled, my Time Capsule is set up for back to my Mac and I enabled sharing of files on it, as well as on WAN access records. I also tried the deactivation and activation CCMM on both Time Capsule and in settings iCloud, still the same error. My only goal is to be able to connect to the Time Capsule and access the files remotely.

  I hope someone can help.

  Thank you!

  provided the ISP modem is in Bridge mode

  It may or may not be, because ISPS generally have some strange ideas about what the term "Clipping" might mean.

  What is the number and model of your modem?

  If all goes well, it is a simple modem.. .with a single Ethernet port the device... as in the example just below, which is the type of device that you really need to be able to access on your network from the Internet devices.

  

  I hope once again, it is not a type of modem/router or gateway device, which combines the functions of the modem router and separated in one package... as in the example below. Often, it is not possible to configure this type of law only as a simple modem device... and what the ISP calls 'Clipping'... is not really. Thus, you're left with a problem NAT which slows down and restricting remote access.

  

• "Unable to connect" remote pages ("could not read the chrome manifest file'); local pages OK; proxy server is configured to none - what to do?

  Firefox 5.0.1 claims to be updated (how he knew that if she could not connect to the Web?), Windows XP Home 2002 SP3 Dell DIM3000 Pentium 4, 3 GHz, 1 GB of Ram.

  Internet Explorer (8.0.6001.18702 with 128-bit encryption) and Opera (10.2? can't get it to display its version) both can access all the local and remote (Web) pages - Firefox does very well with all local pages but impossible to connect to what anyone remotely.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• Impossible to access wifi with other access points

  WNDR4500v3 with firmware V1.0.0. I32

  I bought this router on dec 25 2015 to replace a dead linksys router.
  The router feeds a switch of 16 points from one of the 4 ports.
  I have a win 7 pc connected to one of the other routers 3 ports.
  Then a VoIP connected to port 3 of the router.
  I have 2 other wireless access points connected to the port 16.
  We feed a remote building through a wired connection to the firset access point
  The other access point is also fed by a wired connection.
  The old linksys router had him for 4 years.

  As I said I bought this router as a replacement... but since its worthless and the two wireless access point do not have internet connection.
  So either I get it work or will return it for a refund within 24 hours.

  Figured that out it was Network Manager and windows share the unknown connection of marking.

  In advanved sharing setting I have to change to use for user accounts and passwords to connect to other computers

  Then all the problems went away.

  No more giving up connection and with no internet connection.

• Do not reboot back to my Mac with my Apple ID

  Back to my mac feature suddenly turned itself and cannot be started again the days on my Macbook Pro 2011 (Mavericks 10.9.5) and Air 2015 (Yosemite 10.10.5). I have drawn a few screenshots below, please take a look.

  It worked perfectly fine and I changed no settings at all. The only thing I've done, don't know if it of related or not, is updating Safari to version 9.0.2 on Mavericks and perhaps some security update, it is not displayed in the current list in the app store.

  I tried ticks/start function in setting > iCloud, but quick to slightly once again. Tried to log off, restart, create a new user, re - install OS X, restart the router, use different wifi networks and call support to iCloud. Everything has failed.

  However, back in my works of Mac with the other Apple Mac ID, simply do not work with ID of origin; It's a @me.com ID linked to an email to yahoo and do not upgrade to icloud by car and yet, my other identifiers as well Apple. I also tried to identify you with the related yahoo email, don't worry too much.

  Someone at - experienced this give some advice? I can't my mac remote distally now...

  

  

  

  Try to activate again Back to My Mac. It may be a temporary problem.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!