Impossible to delete the driver HP 8 files in repository under system32/driver store so that I can reinstall the printer software

Similar Questions

• Impossible to recharge the printer software

  Hello

  I had to reload my software for my Photosmart c4580 printer. Unfortunately every time I try I get an error message after extraction of files says:

  Microsoft Visual C++ Runtime Library

  Runtime error!

  Program: C:\Users\andy\appdata\local\temp\7zS2A75\setup.exe

  This application has requested the execution to terminate in an unusual way

  For more information, contact the application support team.

  Is there anything I can do to make it work please?

  Thank you

  Andy

  Hi Andyjp,

  Thanks for keeping me posted. The instructions I gave you for step 11 were supposed to be a shortcut to restart the Windows installation program. We can go about this another way, by following the instructions below.

  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • Type services.msc and press enter
  • Locate the Windows Installer
  • Right-click Windows Installer, and then select Properties
  • Stop the service on the general tab, then Start again
  • Verify that the startup type is set to automatic rather than manual

  Once it comes to compeleted, you can proceed to step 12.

  Here is another possible solution, I've found. Error running Microsoft visual C++ of Microsoft Community

  Please let me know if that fixes the problem, thanks.

• Impossible to delete the files from the printer queue

  Original title: printer HP 1510

  My printer cannot print documents due to an execel document won't delete, I have asked for all documents will have to be cancelled, but it will not erase that.

  Hello

  Method 1:

  Try to follow the steps in this link and check if it helps: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

  Method2:

  Try the following steps to delete the printer spooler and activate the spooler service and check if it helps:

  a. click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.

  b. double click on "Printer Spooler" in the Services list.

  c. click stop , and then click OK.

  d. Click Start, type "%WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  e. now restart the print spooler service and check.

  Note: make sure that you have created a System Restore point before trying these steps.

• delete the printer driver by political group or batch script

  I am migrating our server F & P from 2003 to 2008.  I created all of the printers in server 2008 and tested, and they print correctly.  Test the issue I am running is this: I can add the printer Server 2008 for fine local workstation, but users are unable to print the new queue.  If I go ahead and deleted the printer and remove the driver completely and then add the printer on 2008 server works very well.  So, I'm looking for a way to remove printers and drivers of each workstation via Group Policy or batch scripts to make my life easier.  Thank you.

  Hello

  Given that the problem is related to the windows server, I suggest you post this question in the Windows Server Forums.
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.

• I have a Canon EOS 7 d Mark II. I would like to shoot RAW files. Is there a version of PS that I can use to adjust the CR2 files without having to adapt to DNG files, first?

  I have a Canon EOS 7 d Mark II. I would like to shoot RAW files. Is there a version of PS that I can use to adjust the CR2 files without having to adapt to DNG files, first?

  Hi Nesta,

  This camera requires Camera raw 8.7, versions of Photoshop CS top ^ (latest) should be able to process raw images from this camera.

  Recommend you go with the last a Photo collage software | Download the free trial version Photoshop CC

  Kind regards

  Assani

• wireless printer shows offline and impossible to reinstall the printer software

  original title: offline wireless printer

  my printer is offline and it wont let me not reinstall the software? I also restored the computer to a date where he worked and which did not help... It works when I plug in the usb cable, but not through the wireless... but my Wi - Fi works on the laptop... operating system 64-bit of Windows 7

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2. what exactly happens when you try to install the printer software? You get the error message?
  3. what exactly happens when you try to print by connecting the wireless printer?
  4. What is the brand and model of the printer?

  Uninstall the printer drivers and related software, and reinstall them.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Lack the HP (Officejet Pro 8600 Plus) utility. no need to reinstall - cannot uninstall the printer software

  I had to wipe my iMac and resinstall IOS Mavericks (10.9.5).  Printer (Officejet Pro 8600, 9N11g) works, but won't scan (double-clicking icon in "original item cannot be found") and the HP utility on dock icon is absent, replaced by a "?."  I found instructions to uninstall the printer software so I can reinstall... but there is no longer any HP or "Uninstalling HP's" on my Mac HD folder.  Not there at - it a HP folder in the library/printers folders.  Research Spotlight shows no HP or Hewlett-Packard folder on my hard drive.

  I downloaded a 'HPPPrinterDrivers3.0.dmg' and ' HP-Injket-SW-OSX - Mavericks_v12.34.37.dmg, "which I'm hoping will contain updated software/drivers to reinstall the printer and I hope as the HP utility so I can resume the scan function, but I can't understand how to remove the current printing software, and I don't know if those are the files migrate to use.  I understand just remove the printer will not be enough.

  Can someone provide step by step instructions how uninstall the software and installation (since I don't know if I have the correct dmg files)?  Thank you.

  Hello

  First I offers to repair disk permissions, and then try to reinstall the HP software.

  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you are finished, run the HP-Injket-SW-OSX - Mavericks_v12.34.37.dmg and follow the instructions on the screen, be sure to select the option of Scanning HP when installing to get all the features of the software.

  Please, try the above steps and let me know the results,
  Shlomi

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to uninstall the printer software

  I can't get my printer HP Deskjet 3940v at work; I tried the troubleshooter without result. I want to completely uninstall the printer.

  I have the original disc for the printer that it is came with, so if I can remove all of my hard drive then I can re - install the printer and see if that solves the problem. I don't think that the problem lies in the hardware itself. HP offers more support for this printer.

  Here is the problem and my question for the forum: (I am a novice) I went to Control Panel then printers and removed the printer from this location. But I don't think that uninstalled everything. I looked in programs and features, and I see there, no program to uninstall. (No HP, no Deskjet, no program to a printer).

  I downloaded Revo Uninstaller and it still doesn't show any HP or other programs of the printer on my computer. But there must be something that has to do with the printer still on my computer. I looked in other posts on this site but didn't know what steps to uninstall a printer under Vista.

  Can someone tell me the steps to completely uninstall the printer software?

  I use Vista Home Premium OS on my Sony Vaio computer.

  Hi Mike,.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  Did you do changes on the computer before the show?

  You can uninstall and reinstall the printer in Device Manager and check if that does the trick.

  See these articles for more information:

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

   

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

   

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is useful. If you need further assistance on all issues related to Windows, just tell me and we will be happy to help you.

• Cannot access the printer software after installing new ink cartridge

  I installed new ink cartridges. It prints well but I can't access the printer on the computer action tab. I can't check ink levels, align the pages or check on maintenance. When I click on the folder of the printer it opens but it says it's searching for items. The printer of action file is not there. Anyone know what could cause this? I can't open the Toolbox of the product. What I have to reinstall the printer software, or is there something else I can do to fix this. I have windows 7 and a 3000 deskjet printer. Thank you.

  Harold R. Rodgard

  Hello Harold,.

  The question most likley do not have much to do with the replacement of the ink cartridge.

  Lately, HP has released a new software, due to the latest MS updates, you must update the software to get all the features.

  Go to start > programs > HP > select your printer folder and follow uninstall them.

  Now, download and install the new version of the software from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DJ-109022-2&cc=us&DLC=en&LC=en&OS=4062&product=4066429&sw_lang=

  Shlomi

• I have DV files on my HDD how set up so that I can import them into a first draft?

  I have DV files on my HDD how set up so that I can import them into a first draft?

  Try with a single to put the suffix .avi and .mov to see if that fixes it so the file can be imported into the BODY.

  If that works, it should be possible to run a simple package adds the suffix