Connect error after hard drive encryption

Similar Questions

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• Computer "not responding" when I connect the external hard drive.

  Hi all

  When I connect my external hard drive to my laptop, it is detected and the icon for the material appears in the taskbar background. But when I go to my computer, it happens that does not. I can always open other programs etc that are not related to the hard drive, but nothing to do with the hard drive "fails". As soon as I plug it on, the laptop starts responding again. I tried it on another laptop and the same thing happens.

  Any ideas?

  Hi Wendall81,

  -How long have you had this problem?

  Follow the steps below:

  Method 1:

   

  Step 1: Boot in safe mode and check if the problem persists.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

   

  Run a check disk on the external hard drive.

  For instructions, see check your drive for errors .

  Note: If any bad sectors are found by running the check disk utility and recovery of the attempt of bad sectors option is checked when checking the disk for errors, data in the bad sector can be lost as they tried to recover bad sectors. Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• try to connect to a hard drive WD 1 TB

  OK, so I'm trying to connect to a WD 1 TB hard drive and I can't, I can ping by ip address name and I have two other computers that can use the hard drive very well I don't know what I'll do worng all computers is windows 7

  Hi eric242934u2,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect HDD WD 1 TB.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  3. what exactly happen when you try to connect the WD hard drive?

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the fix it tool the link and verification.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I would also ask you to contact the computer manufacturing.

  WD external drive is not recognized or detected in Windows XP after installation and use that also applies to windows 7.

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I connected an external hard drive to my MAC pro. I want to delete a folder, but there is that no move to trash option shows the jury. Kindly help me on this.

  I connected an external hard drive to my MAC pro. I want to delete a folder, but there is that no move to trash option shows the jury. Kindly help me on this.

  In the Finder, right-click on the drive and select information. Under sharing and permissions have read and write privileges?

• Windows detected new hardware wizard appears each time I try to connect an external hard drive via the USB port.

  Whenever I try to connect an external hard drive into a USB port, Windows detected new hardware wizard will appear. He then not recognize the external drive at all. It does not appear in disk management. In Device Manager, it is listed as a 'device' USB bus controllers not. Under "other devices", there the question mark yellow and says the device is not configured correctly (code 1). External hard drive works fine on other PCs. It's a plug-and-play device. Port and USB cable work fine with other devices. Just this external hard drive has never worked on this PC.

  Hello

  I suggest that you try to remove USB controllers to the clean boot state and control.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  See also:
  http://support.Microsoft.com/kb/310575

• Impossible to connect an external hard drive

  I unplugged my hard drive of the computer and re plugged. I can feel and hear it runs that power is connected but there is no light on and the computer keeps telling me that it is unplugged. I have checked and re checked all connections. If the wire to the computer could be broken and if so what call? He isn't a regular usb cord. There is a wide connector at both ends.

  Original title: ex hard drive does not work

  Hello Ellen,.

  I understand that you have a problem when connecting your external hard drive to your computer. This could be a hardware or to issue drivers. It is also possible that your cable is defective. You can try to reconnect the hard drive to another USB port. If you use an external hard drive or a hard drive internal SATA cable /IDE cable.

  Please, try the following and see if it helps.

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  I hope this information helps.

  Please let us know if you need more help.

  Thanks and greetings
  Sarandeep S - Microsoft technical support.

• How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  Never mind.  I found the license key for the previous product and was able to complete the installation.  Being a "pack rat" has its merits, sometimes.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Error 'No hard drive installed' after reboot

  suddenly my laptop stopped working.  When I rebooted, it says no hard drive installed

  I hit f10 repeatedly key at startup, and the problem was solved.  Everything went very well upward.  Thank you very much!!!

• Satellite M70 - after HARD drive partitioned, the OS does not start

  Hello

  Good then this is a real doozy, and I hope that someone will help.

  I started to fix my satellite m70 girlfriends using the disc of recovery etc, everything went fantastic, the HARD disk has been erased and Windows + all software has been reinstalled.

  Then I thought it would be a good idea to use partition magic to partition the hard drive, so I chose the main hard drive and cut 10GB of it to put in place a new partition.

  I rebooted, and then after Windows restarted again completed.

  NOW, it does not charge, it says no operating system, so I tried to start with the recovery disk and all over again...

  If I click on continue (to start the recovery process), however it is said now that the "Error #1828", free space is too small.

  I'm really angry that this has happened and I just want to start over again.

  Can someone help me with this?
  I can't access the Bios either (not sure if that might help), because I don't know the password (must be a fault im not aware of).

  Help, please.

  Thank you
  SG

  I think that this is the reason why you used a tool to change the size of the partition. At best, this should be done before you install Windows and 10 GB is a little too small for Windows. You must use at least 15-20 GB for the first partition where the BONE is placed.

  To resolve this problem, you must delete all existing partitions before using the recovery disk. Therefore, you can use a Windows XP disk or something else. Just boot from it and delete all partitions. Then the recovery disk should work.
  Check it!

• Recurring HDD error - new hard drive

  I've been in contact with HP on a recurring problem with my g6 Pavillion - there periodically blue screen errors and then won't turn on, shows an error 'hard drive '. Then, he refuses to start up for anywhere from a few minutes to a few days. I sent it in for repairs, she returned with a new framework of screen (?). More hard drive errors. I called and they sent a new hard drive for me.

  Today, I installed the new hard drive. When I tried to start it for the first time, I was greeted with yet another error of hard disk. I ran a test, he said that the hard drive was fine (it used to say that before, sometimes too, which is probably why they do not have to replace it in the first place). Turned off and turned on again - it has started well.

  Now it works, but I don't feel no better about it because she had this initial error. Is this normal for a new disk hard failure right after having been hung? It has been installed of course very well, I'm typing this message on a fully functional laptop now. I'm tired of living on a portable player (it's a bit like living in a suitcase), so I should be grateful if you would ensure that the laptop is not just going to crash again, but it seems to me that the new hard drive will not be my solution.

  I have an extended warranty - but I don't have the luxury of time when it comes to sending, as I am a student full time and use the tutorials online every day.

  She would need replacement motherboard, which is not necessarily a death knell for the computer. Since you have a guarantee, it would be covered. Unfortunately, he would send it in for service. It could be done locally outside the warranty if you live in a decent sized city for maybe $ 300-350.

• Error reading hard drive

  on startup, I get an error of hard disc.
  message also says press Ctrl/Alt/Del to restart.
  Sometimes it works and after doing this five or six times, the computer loads windows etc.
  Sometimes, I also have a read error when the computer is used and the system stops a car restart.
  The drive sounds very loud when I have this problem. Sound like something mechanical is to hit some sort of stop.
  As I could eventually get the PC works as it is now I think ther hard drive should be OK.
  This could be something to do with the hard disk driver?
  Has anyone else had this problem?
  Appreciate any help I can get.
  David Giles

  Hello David

  It will be interesting to know what model of laptop you have. Is an old or a new model?

  In any case, it seems that the HARD don t drive works fine (if there is a rattling noise). Is it possible to check with another HARD drive?

• Pavilion Mini 110: Mini 110 suddenly invite you for the BIOS password after hard drive failure

  After mini disk failure hard full sat for a long time. So, I'm going to replace hard drive today and it is stuck on the screen of the BIOS password! After that 3 wrong attempts it gives an error CNU9283Y90

  I tried to unplug the CMOS battery, wait awhile, and then tie... no go!

  Can anyone help!

  TIFF

  TIFF.

  Enter e9lo7ufio1

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO