Impossible to get a sound in the laptop to TV via wire
Hello
Hi Mark,
1. are you able to listen to the sound of another application except TV?
2 did you do changes on the computer before the show?
I suggest to run the Microsoft Fixit in the following article and check if the problem persists.
Diagnose and solve the problems of Windows audio playback automatically
http://support.Microsoft.com/mats/AudioPlayback/
You can also see the following article for more information on the sound issues:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Let us know if that helps.
Tags: Windows
Similar Questions
-
I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop
Thank you. I had to go to the sounds and have speakers/headphones to HDMI it didn't work at first but founmd you need to have the TV and the computer.
-
Notebook Compaq CQ50 - 107NR PC-not to sound of the laptop without headphones
No sound from the laptop without headphones... help?
Until today, I was perfectly able to hear the sound in my Compaq CQ50-107NR notebook PC with or without headphones plugged. I have not upgraded or anything and I don't know how to fix it. It shows everything works well, but is not. Any help would be greatly appreciated.
Hi rajiv puri,.Because that did not fix the issue, I suggest delete and then install the sound card and check.It may also be that the sound card may be disabled in the BIOS, probably only the edge can work.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Newly build Production environment (don't use it yet)
OS: Linux redhat 64-bit 2.6.18
Cluster version: 11.2.0.4
This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs. However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR. and stop the crs shows: impossible to get in touch with the loan of cluster service.
Alerts cluster log shows below:
2014-03-25 03:50:01.429:
[crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.
2014-03-25 03:50:01.433:
[crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]
]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)
2014-03-25 03:50:02.123:
[ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".
2014-03-25 03:50:03.407:
[crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.
2014-03-25 03:50:03.411:
[crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]
The NEWSPAPER of the ASM alerts:
Wed Mar 25 03:21:49 2014
WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.
WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.
WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.
WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.
Wed Mar 25 03:21:49 2014
NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1
NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1
NOTE: check PST: grp = 1
GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071
ERROR: read no quorum within Group: required 2 found 1 records
NOTE: audit PST grp 1 fact.
NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear
NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear
GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid
ERROR: read no quorum within Group: required 2 found 1 records
Wed Mar 25 03:21:49 2014
NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)
WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.
2 node rac cluster is normal. We were able to stop the crs without force.
What should I look at to understand what is happening here?
Thanks to adavnace.
WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.
NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:
No default value is 1 M
-
Impossible to get a substring of the current s URL page
Hello
I have a very strange problem with the URL returned by GSF. I seem to be impossible to get a substring of the URL - the String.substring (int, int) method does not appear to return the expected results. It seems that other methods of strings (such as the indexOf (String)) seem to be operating on the chain of substring returns a part, rather than on the chain saw when the url is printed in its entirety. The corresponding code is less to:
-----
AssetApiWraCoreFieldDao wraDao = new AssetApiWraCoreFieldDao (ics);
String wrapperCurrPage = ics. GetProperty ("com.fatwire.gst.foundation.url.wrapathassembler.dispatcher", ServletRequest.properties ", true);
WebReferenceableAsset wraCurrPage = wraDao.getWra (pageId);
String theLongUrl = new String ((new WraUriBuilder (wraCurrPage, wrapperCurrPage)) .toURI (ics));
This displays the correct URL (http://www.example.com/page)
out.println ("FULLURL:" + theLongUrl.toString ());
This displays the first 25 characters of a string of unknown characters (satellitescheme://SSURI/?)
out.println ("substring:" + theLongUrl.toString () .substring (0.25));
-----
All help to work out what happening would be appreciated – as far as we can tell GSF (or maybe WCS) are originally String to behave in a non-standard way.Hi 950972,
There is little of the magic that is you fool. Basically, if you change out.println () System.out.println () you will see TWO URLS begin with satellitescheme: / /. What is happening, this is the URL which are produced by the ISU Sites still are built with a satellitescheme://...#satellitefragment. Then, what is Server RHN Satellite will process the result and replace the strange chain with one that fits your URL assembler (and in this case, you use the GSF assembler).
In your code of substring, you are breaking the special chain and are cutting the encoded URL. RHN Satellite Server does not see the prefix and the suffix combined, so it does not have to make the substitution.
That's why Your ' e see what see Your ' e.
A big question is however, why you try to process the URL generated by the API. I guess that sort of substitution will happen, but that should not be done. What you trying to do? I'm sure we can find the right way to achieve your goals.
Kind regards
Tony -
Cannot hear the sound of the TV after connecting via a HDMI cable
Original title: sound on tv
I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only. How can I fix?
Hello Monica,.
-What operating system is installed on the computer?
If you have installed Windows 7, you can read these articles and check if that helps.
Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv
Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions
Thank you.
-
Satellite A30 - impossible to get a sound after installing XP
Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you
Hello
It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.
If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com
Good bye
-
Impossible to get a sound of sony computer
Original title: my vaio sony says my audio player works well... but I still aint get no sound from my speakers
my vaio sony says my audio player works well... but I still aint get no sound from my speakers
Hi Vijaypunwasi,
1 did you do changes on the computer before the show?
2. which version of the operating system are you using?
3. What is the model of the sony computer?
4. do you receive any error messages?
I suggest you to see the site mentioned below:
No sound in Windows
http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows.
You can also consult the site mentioned below:
Tips for solving common audio problems
http://windows.microsoft.com/en-us/windows7/tips-for-fixing-common-sound-problems.
-
Impossible to play a sound in the CAR Flash Media Player when it is connected.
Original title: RCA TH102 256 MB Flash Media Player
I can't get my computer to play sounds. He won't play the sound of the computer or my Altec Lansing computer speakers. The computer program to solve a problem, says that everything works and even my speakers work.
The program to make my computer work speaking to her, rose and I chose to not use it. Could it have something to do with it. ? I checked for the update on programs and updates on drivers and they all come back indicating that everything works well. I'm puzzled.JLHello
1. have you made changes on the computer before this problem?
2. is it works much earlier?
3 is the issue limited only with Flash Player?
4. are you able to hear the sound of the computer?
Try to connect the device to a different USB port, if it does not. Check with the other computer.
Run the fixit available in the link below and check if that makes a difference
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Hope the above information is helpful.
-
No sound from the laptop to the TV with HDMI connection
Reference Dell Laptop windows 7 connected to the Samsung 46 '' smart TV with an HDMI cable. Video works great but no sound on TV. Is there a setting somewhere that will cause the audio to work from the laptop to the TV via the HDMI cable?
Right click on the sound icon in the system tray, select playback devices and output of the default value.
You will need to install an audio HDMI driver for your graphics card if the HDMI output is not displayed...
-
No sound from the laptop, unless I have plug in headphones
It started today, actually. I did everything.
Disabled/Re-the pilot's license, check the errors, troubleshooted, etc etc. Literally all of the measures to solve this problem has not worked.
Hello
What is the brand and the model number of the laptop?
Method 1:
Also check if the laptop speakers are set by default in the sound playback
(a) go to control panel
(b) select the hardware and sounds
(c) click on manage audio devices on the sounds tab
(d) go to the playback tab and check if the portable speakers are the default.
Method 2:
I suggest you run the Microsoft fixit tool and check.
Diagnose and automatically repair audio playback problems
http://support.Microsoft.com/mats/AudioPlayback/
Method 3:
I also suggest you to see the links and check.
Tips for solving common audio problems
http://Windows.Microsoft.com/is-is/Windows7/tips-for-fixing-common-sound-problems
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
-
I tried the command + option + R and command-R start-up and restart, but no dice. I'm trying to reinstall Mac OS to give the laptop to a friend. Any tips?
Hey Sndietzel,
Thank you for being a part of the communities of Apple Support.
I understand your message you are trying to boot a MacBook (2008) for OS X Internet Recovery but it is not successful. This happens because this year and model of Mac does not support the OS X Internet Recovery:
Computers that can be upgraded to use OS X Internet Recovery
What version of Mac OS X is currently installed? In the menu bar select > what the Mac and you should see the version of OS X installed. If she has OS X 10.6.8 or more, then there is no OS X Recovery, and you will need the installation disk OS X, or the disc that came with the computer to erase the disk and reinstall OS X. You will need to insert the disc while the Mac is turned on, and then restart while holding the C key to boot the disk.
Take care.
-
Cannot get any sound on my laptop ACER Aspire 5610
Last night, the sound on my ACER Aspire 5610 stopped working, if the sound icon in the lower right corner of the screen says the sound is 100%. I tried to put on the helmet; still no sound, nothing. I went to the control panel. It indicates that the device is functioning properly. I'm so frustrated.
Hi MichelleFredette,-Remember you proceed with recent computer between the calendar changes when things worked fine and now?Run the troubleshooter of playback of the sounds from the link given below and if it helps to fix the problem: -
Sound of the laptop does not work after 20-30 minutes
What happens to my new laptop Toshiba too! When I start and press the volume keys, they work fine, but if I start up the laptop and then later lets say after 20-30 min, I press them, they do not work!
Separated from: http://answers.Microsoft.com/en-us/Windows/Forum/windows_7-hardware/why-Don
Hello
You can view the documentation for Toshiba to learn how.
-
Impossible to listen to the sound in the laptop (HP DV 1000) front Speakers
Dear Sir:
I have laptop HP pavilion DV 1000, operating system Windows XP
I am unable to hear the voice of laptop output speaker however, sounds can be listened to only by inserting a headphone or external speakers into the Audio Out jack.
Kindly guide me in this regard.
Concerning
Could you please give me the number of the exact product for your laptop?
If you need help finding it, you can use the following link:
http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us&DLC=en&LC=en
Thank you
Kyle
Maybe you are looking for
-
Graphics NVIDIA GeForce GTX 550 Ti may need BIOS update.
I am trying to install a card grafics of nvidia GeForce GTX 550 it on my Compaq Presario desktop computer.Model SR5115NL product number GN729AA-ABH equipped Windows Vista 32. The message I get from the Device Manager is:"This device does not work pro
-
What is the best way to detect if the device has a touch screen?
How do detect you if a device has a touchscreen with version 4.7 of the OS? With the upcoming 9630, that I need to know he can't stand not touch. Thanks for the help. ~ chris
-
Weather for blackBerry Smartphones need help to find the best App
I need to download the Besst Weather app I want the weather icon to show in good detail the snow, rain, clouds, in GOOD DETAIL nice please good list I would really appreciate it
-
Whenever I try to access facebook.com, I get a message telling me that there was a problem loading the page, the connection has expires. This only happens with facebook. How can I fix?
-
Fusion Audio / video in CS6 - same as CC?
Hey everybody,I usually work on CC, but I'm on another computer with CS6 editing, I can't seem to do a very simple thing that I always do in CC.I want to merge audio files and video files together by "audio" not starting point or endpoint.and it seem