Impossible to get Feedburner feed to load correctly

Similar Questions

• Impossible to get f. reset prerequisite tabs correctly on the opening.

  I put restore last session on the opening of Firefox, and it worked. Something happened, and I can't seem to do much more. For example, to

      http://www.iws.org/interactive_nestchat_allUstream.html
  

  It opens to this page, which has controls to adjust horizontal and vertical, but is no longer restores the results of these controls on the page of the last session, and I have to go through this process everytime I open Firefox. In the menu Options/general, took me to "show my windows and tabs from last time", but it always goes to the homepage layout, no matter what I put in there. How do you get Firefox to the "no home page" value, or its equivalent? If you leave the empty space, he goes to the Firefox page. Is this one of those things that you define in a somewhere .ini file?

  Note that your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: open with) If you do not create this file yourself.

  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• HP Deskjet 3050 All-in-oneJ610: impossible to get my drive to load Windows 10 so I can install my scanner

  When I switched to 10 Windows 7 my devices were on but I did a restore and lost the scanner. The disc will not load to Windows 10, only Windows 7. How can I fix this. I always have my printer though.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050-all-in-one-printer-series-J610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Impossible to get the page edge animate loading first, any browser

  Problem weird here, people.  I have a web page created on board animate which works very well with "Preview in browser", but does NOT correctly load the time _first_, it is called from the Web site.  It loads only partially (Firefox, Opera, Chrome, Safari) the first time a non-cached browser tries to load the page.  However, after trying to load the page from that first time, if you go to any other Web site and then come back to my site to load the page, the page loads correctly.  It kills me.  I'm guessing that this behavior will be immediately recognized by someone who can tell me a solution.

  To show this behavior:

  1) go to the http://www.lightisrising.com

  Loads a partial page (without animation in the upper left corner, bottom left, right, and lower right cells).

  2) go to another website, such as Adobe.com

  (3) back to www.lightisrising.com, and the page load and play the videos properly.

  Of course, I need the page to load correctly the FIRST time someone visits it.

  Thanks in advance for any help. Very much appreciated.

  Hi, mbranco-

  I tested your site and it looks like a simple reload will actually reach your videos to display.  You use edgeHero to play videos?  My best guess is that there is a race condition where the videos are not fully charged, and then edgeHero leaves the video on screen: No.  Once they are cached, the videos loading prior to control, and they will be displayed.  If you look at the files when they are unloaded in a web Inspector like Chrome or Firebug Inspector, CSS has display: none defined on the videos.

  Thank you

  -Elaine

• YouTube can not load correctly

  I can't get Youtube to load correctly in Firefox. I don't know what happened. Flash is up to date, I've scanned for malware, I rebooted the computer, etc.. Someone at - it other suggestions as to how can I fix?

  A screenshot of what it looks like: http://i59.tinypic.com/qsmel0.jpg

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • 

    > Options/Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • 

    > Options/Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  If above doesn't fix your problem, can you give me the troubleshooting information in the installation of Firefox that has problems. It is an essential step in troubleshooting.

  • Click on the Firefox button in the top left, then click on the help menu and select troubleshooting information in the submenu. If you do not have a Firefox button, click Help on the top menu and select troubleshooting information in the menu.

  Now, should open a new tab containing your troubleshooting information.

  • At the top of the page, you should see a button that says "copy the text to the Clipboard. Until it clicks.
  • Now, go back to your post on the forum and click inside the box to answer. Press Ctrl + V to paste all of the information that you copied in the post on the forum.

• Themes don't load correctly.

  Not sure if it is something specific to the latest version of Firefox (23.1), but the themes do not appear to load correctly. More precisely, it looks like the background image is not repeated correctly to the bottom of the sidebar (all in a Sidebar), as shown here:

  http://btb2.free.fr/temp/screw_this.jpg

  What's particularly weird, is that he * was * work properly at the start and then just stopped in the middle of a session for no reason apparent and now I can not understand how to operate properly again. Ideally, I would like to find a way to download the theme and edit/store locally, but Google has been surprisingly useful in this area since the first step (download the .jar file) seems impossible for the themes hosted on addons.mozilla.org.

  Closing - accidental double post.

• My adobe acrobat forms do not load correctly. I have uptodate version of this software.

  I am an immigration lawyer and I have an online immigration program that I use on a daily basis. Since the last update of Firefox, the forms of immigration (adobe acrobat) for my clients to do not load correctly. I get a message that the forms may not display correctly with an option to open with a different drive. The form opens properly if I choose this option, but the form does not allow me to add and save the information in the file of the client is of no use to me. If this cannot be corrected, I'll stop using Firefox.

  I found the solution myself. If anyone has this problem, contact me and I'll tell you what has worked for me.

• your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  t-4-2

• The user profile does not load correctly

  Running Vista Ultimate.  I have 2 user accounts, the two administrators.  If a user remains logged on for any period of time (more than 10 minutes), disconnects, and then another user logs on, they will get the dreaded "your user account is not load correctly."

  A reboot always restores the afflicted user account.  Web an extensive search doesn't have all the solutions near mine.

  Examined the msgs of following error in the application event log: 1511 1515 WARNING WARNING 1502 1508 error.  This just started recently.

  Appreciate your help.

  Have installed kaspersky AV and media center tv pack units.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you've added the Google toolbar, Chrome or the z
  Google Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Lenovo G550 does not load correctly.

  Well well, Hello to all.

  I had a problem with my Lenovo G550 recently. It doesn't load properly and in most cases, I have to recharge it when it is off. When I start my laptop and as soon as I get the screen of Windows login (or not even up to the loading screen), the power led starts flashing. I log in to see the laptop not charging. I tried what you usually would, like turn the LAPTOP works after a period of time, remove the battery and put it in after a few minutes or maybe even an hour, check the charger, bring in and out of the computer laptop and even leave the rest of the laptop for some time without the charger or the battery in the. After all, sometimes even that, it seems that it still doesn't load. Sometimes it will load when turned on, though, does not charge for a few minutes and stops loading. Even when turned off, sometimes, it doesn't load correctly or the other.

  If you know something that could solve this problem, a suggestion or if you know why I'm having this problem, just reply to this.

  This problem has been resolved. My charger came with my laptop was indeed a problem. =/

• "Your user profile was not loaded correctly! You have been connected with a temporary account.

  Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons.  All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time.  I immediately thought that I had a virus, ran a scan and nothing came.  Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere.  Did a system restore, but that did not help.  I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account."  I am only connected under a temporary account.  Help, please!  I have no idea how to solve this problem!

  Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons.  All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time.  I immediately thought that I had a virus, ran a scan and nothing came.  Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere.  Did a system restore, but that did not help.  I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account."  I am only connected under a temporary account.  Help, please!  I have no idea how to solve this problem!

  Hey Kimberly9701

  Here are the tips from microsoft on a temporary profile loading

  "Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administrator. »

  http://support.Microsoft.com/kb/947242

  Walter, the time zone traveller

• Profile of user not loaded correctly, you have been connected with a temporary profile. How can I fix it?

  I use a Toshiba Satellite with windows vista. My father gave it to me, but instead of creating a new user account, I have renamed the original administrator account. two years later, I have 3 accounts on the laptop, which only the original is still the sole Director and has access to all partitions on the hard drive as well.

  A week ago, my computer laptop power had reported issues so I immediately sent for repair. I came home today and the Standard 2 user accounts work perfectly. However when I connect to my original administrator account I get this pop - up message:

  "The user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Check the log of the events for more information or contact your administrator "

  I lost all my profile settings, including internet bookmarks, music playlists, etc. The office looks like a brand new installation of Vista and all the customization disappeared. I can't afford to lose all data. It is seriously important and was on my desk and in my documents.

  How can I get my profile without losing any data?

  Hi Salman91,

  Thank you for visiting the Microsoft Windows Vista Community.   New profile created, try browsing to the old profile (C:\users\username).  You should see all the old user data.  If this does not work, try to copy the files in Safe Mode.

  Please let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Desktop computer does not load correctly

  We can no longer switch uses profiles without having to reprocess the computer because the Office does not load correctly.  When we switch between profiles of uses without reformulate the computer, we get an error message indicating that "your office is not load correctly... loaded in safe mode.

  This start happening a few weeks ago.  This problem occurs every time that we move from user profiles or log out, and then move the user profiles.  We have to reprocess the computer on the desk in order to load successfully.

  All that we can do to fix this?

  If this problem was not more than 15 days ago, and if you remember the date when you did not have this problem, please do a system restore. Choose the date when there was no problem that your restore date.
  If this does not work, please do a check of the filesystem (sfc/scannow)

  Procedures for system restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done

  File system (sfc/scannow) check how to:
  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  t-4-2

• Driver does not load correctly

  Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly.  Whenever I start my computer I get an error while loading programs are.  It is said that a driver has not loaded correctly.  I am running Windows 7 home.  It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website.  I don't remember exactly.  Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant.  Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver.  All other functions work.  I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem.  Any ideas how I can fix this problem?  Thank you.

  Hi Dave46a,

  Welcome to the HP Forums!

  I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.

  I would try the following:

  1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).

  2.) try using the printer HP install wizard for Windows for the re - install.

  (3.) to run the HP print and Scan Doctor to see if other errors occur.

  Hope this helps and have a nice day.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ