Impossible to get Oregon Trail 2 to install on my Windows 7 PC

Similar Questions

• Impossible to get scanner HP scanjet 8250 to work with Windows 7

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  writing in the new message: * e-mail address is removed from the privacy... *

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  What version of Windows 7 do you have? It is 32-bit or 64-bit?

  Have you tried HP support? According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=214599&prodTypeId=15179&objectID=c01909569 here, there is limited support for the 8250 under Win7, which is their way of saying, it may or may not work.

  You can get the driver from here http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=214604&lang=en&cc=us&prodTypeId=15179&prodSeriesId=214599&taskId=135 . Simply choose your version of Win7.

  Many HP products are very picky with their installation procedures. I found that the instructions must be followed strictly in the order as listed, or there may be a problem. If the software has already been installed, it is sometimes best to uninstall it, and then try again. Unfortunately, since most of the documents, it seems the 8200 series was designed more for Mac and Windows.

  I wish you only good luck :-)

  SC Tom

• Can't get my J470DW brother to install on my Windows 7, help!

  I just bought a new printer Brother. The installation went well until it asked me to plug in the USB cable. then he came to a sudden stop! It is said that my drivers were not installed. Sometimes he says that there is not enough storage space on my computer, which is bullshit because I'm not even using half of my storage space again?

  That's what I tried:

  1. I did troubleshooting on my computer of sorts, no luck.
  2. I called brother, no help, except to say that I should get a new USB cable, that I'll take tomorrow and try, but my only current was working fine before smoking so don't know why it would suddenly have on me?
  3. I called Microsoft and the woman ran a sort of scan just to tell me I had the damaged files and need to pay them $159 or something like that to have an advanced technician fix, I refused.
  4. I ran my own analysis on the command line: chkdsk /R and no problem seemed to be detected...
  5. I am very close to take the printer back where it came from... help!

  I really need some help from someone there... I still think this is a simple problem that someone will know how to fix easily because they know how... Thank you.

  Try to download the drivers and installation.

  http://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=mfcj470dw_us_eu_as

  or: http://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfcj470dw_us_eu_as&ftype3=2029&faqid=faq00002553_000

  or see: http://support.brother.com/g/b/producttop.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as which leads to an update of the firmware

  http://support.brother.com/g/b/midlink_os.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as&type2=4&orgc=eu_ot&orglang=en&orgprod=mfcj470dw_us_eu_as&TargetPage=18

• Impossible to get tabs to show despite select "open new windows in a new tab instead.

  Unable to get tabs to show everyone. IE cannot open several pages at once. (I recently added firefox SEO so don't know if this can affect what anyone) Have restarted Firefox and computer. Using windows 7, 64-bit PC.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Impossible to get Trio A1000 MP3 player to work with Windows XP Pro

  I have an A1000 Trio MP3 player and have a problem trying to download MP3s to it. The computer recognizes the device and says it's working properly, but I see no activity when I try to download MP3s to the unit. I've updated Windows Media Player to Media Player 11, but still have playback in Media Player: "Device Connect" when I try to synchronize files with the mp3 player.
  Any suggestions?

  Your Trio is plug-and-play. So, go into Device Manager and uninstall all your USB hubs.

  Re-start.

  XP will be re-installed the necessary software automatically. Once everything has "calmed down", plug your Trio. XP will install the software (again).

  You should then be able to sync.

  No: If you have any USM devices that need to install specific drivers, just plug their and XP will do what is necessary. If not, install them manually.

  If this does not work, go back to WMP10, then re-install WMP11.

  See you soon,.

  Jerry

• Is there a way to get my iMac 2007 to install 64 bit Windows 10?

  I need to partition again.

  I have Widows Vista and upgraded to widows 10 but it is 32-bit.

  Updates that I need for the software I use requires more space on the platform, which I love, as well as the requirement for 64-bit safer.

  I'm an architect and use Revit.

  Revit works with Windows 10 32-bit level but Revit has been improved and now need 64-bit.

  Windows Vista is no longer. Windows 10 is the and all other windows... (Imitation of Apple have I just said that) OK, seriously... I need help

  Yes, I could go back to an earlier version of Revit and an outdated version of Windows but that in not my preference and I want to stay with Tech. In fact I don't even know if Vista is sold and more. I don't like either.

  I'm a Mac user (for those who know just what this little statement). There is no chance that I 'go back' to the computer.

  My 2007 is great it works really well.

  I'm running the latest OSX El Capitan.

  I need just to accept the updates to 2017 Revit and windows 10 64-bit...

  Please tell me it can be done without having to buy a new computer.

  Curtis p. wrote:

  Please tell me it can be done without having to buy a new computer.

  I don't think anyone can tell you that. Although you can run W10 as a virtual machine which is not possible on your iMac, the performance would be terrible. Would need you at least 4 GB of RAM and 6 GB would be better. But try to run Windows 10 and Revit on an older iMac of 9 year running El Capitan would be very problematic.

• Install Vedabase on windows 8

  Hi all

  I want to get help on how to install on my windows 2003 vedabase 8.

  Thank you.

  Try to install in compatibility mode.

  http://techingiteasy.WordPress.com/2013/07/08/using-compatibility-mode-in-Windows-8-1/

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• Impossible to get VM Tools to install

  I mount the image converted from my PC under XP SP3.  I can't get VM tools of load/install.  I tried several different things based on info in the comments.  It has not installed with Fusion2.0 so I upgraded to 2.0.2 and it still does not work.  I watch the VM menu and it said 'Cancel VM tools install.  I restart the vm machine and still no luck.  I don't want to turn on and have to start all over again.  My XP is a retail purchased the upgrade to Win98 (OEM).  I have a program that I need to run on the PC, but do not want to go to the PC to run it.  Any ideas?

  My XP is a retail purchased the upgrade to Win98 (OEM)

  In the Virtual Machine library window, which guest operating system Fusion think machine has virtual - XP, 98, something else?

  The menu item install VMware Tools to connect the image appropriate to the guest. If you have autorun disabled (safer), you must run D:\setup.exe.

• Error message - Oregon Trail ceased to operate and close the program.

  Original title: Oregon trail 5th edition with vista.

  I can't get my oregon trail to run on Windows vista. I already tried to change the way compatible mode to run on widows 98, but I always get an error message that the Oregon Trail has ceased to operate and close the program. Is there anything else I need to do to get the game to work?

  Finally, I got the game to work to reverse the graphics driver to an earlier version, but which in itself was more trouble. I couldn't go back to the way it was before. I finally just installed pilot lasted, but now it doesn't let me roll back again to play the game.  When I searched on the internet, it seems there are several compatibility issues with playback on Vista Oregon Trail. Is it possible one could use the old view of play the game without messing around with my settings of the screen?

• I get an 80070663 error when installing an update on the computer.

  Original title: impossible to install KB2687499 on Windows Vista

  The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.  So I downloaded the update manually, but when I run it, I get the message: "Please wait while the update detection is to be run." and then I get the message "an error has occurred during execution of detection."  I called the Help Center (SRX1193068976ID) and gave them the windows update 80070663 error code.  The representative sent the following links:

  < your="" answer="" tech="" thought="" you="" might="" find="" these="" links="">
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-A43D-26ee4f42efe2

  http://support.Microsoft.com/kb/913754

  I followed all the instructions and I can not yet solve the problem.  Any help would be greatly appreciated.

  Thank you
  PAM

  Hi Pam,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of an update on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) you are able to install other updates on the computer?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 1 and 2 require changes need to be made in the register. You must back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  Kareems, how are you trying to install? Live? Or from iTunes. You can connect your phone to your computer and launch iTunes and have iTunes download and update the phone.

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?