Impossible to get T-Mobile SIM to work in Windows 8

Similar Questions

• Impossible to get H/P 7600printer to work with windows 7, 64 bit

  Why won't my printer which is a H/P/7600 works with my windows 7 64 bit

  Have you tried to install in compatibility mode?

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• What can I do to get the Risk II to work on Windows 7?

  What can I do to get the Risk II to work on Windows 7?

  Hi rafcaf75,
   
  1. have you tried to install the game? If so, what was the result?
   
  We did check the compatibility of the game risk II with Windows 7 and can't find any information. This means that the game may or may not be compatible with Windows 7.
  See compatibility Risk II
  Step 1: We recommend you install the game in Windows XP or Vista compatibility mode and check the difference.
  To do this, see make older programs run in this version of Windows
  Step 2: If nothing works, then you can install the game in Windows XP mode
  a. download and install Windows XP mode.
  b. Click Start, click all programs, and click Windows XP Mode.
  c. open the game configuration file and install it.
  d. start the game and play.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get my scanjet 4400c to work with windows 7

  How can I get my scanjet 4400c to work with windows 7?

  Site HP says that it is not in the United Kingdom!

  Hello

  Sorry to say no luck, no more support from HP and Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20Scanjet%204400c%20Flatbed%20Scanner&v=HP&UID=C9870A&pf=0

  Kind regards.

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Qosmio G40 XP MCE - impossible to get an IR receiver to work.

  Hello.

  I have a G40 with XP MCE, but I can't get an IR receiver to work. I would like to use the remote control. You know which driver to use to make this work?

  Thank you

  I think its called the pilot consumer infrared (CIR).

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• RV180 router: impossible to get Inter-VLAN routing to work.

  I've been hit in this now for two days and just can't get Inter-VLAN routing to work on this router.

  Here is the place is:.

  Updated to the latest firmware of Cisco (1.0.1.9).
  From default settings, I added 2 VLAN as follows:

  VLAN (id = 1) default: dhcpmode = port IP=192.168.1.1/24 from server 1
  VLAN vlan2 (id = 2): dhcpmode = port IP=192.168.2.1/24 from Server 2
  VLAN vlan3 (id = 3): dhcpmode = port IP=192.168.3.1/24 Server 3

  (without link)
  WAN port
  |
  Routing/NAT
  |
  --------------------------------------
  VLAN ip 192.168.1.1 192.168.2.1 192.168.3.1
  name of VLAN by default vlan2, vlan3
  VLAN id ID = 1 ID = 2 ID = 3
  Inter-VLAN only routing Yes Yes
  Excluded excluded unidentified 1 port
  2 excluded excluded Untagged port
  Port 3 unmarked excluded except
  Port 4 (not interest) without excluded tag excluded
  ---------      --------     --------
  1 2 3 Port port
  |              |            |
  AdminPC PC3 PC2
  192.168.2.191 192.168.3.181

  PC2 is assigned an IP address of 192.168.2.191 (DGW = 192.168.2.1) - OK
  PC3 is assigned an IP address of 192.168.3.181 (DGW = 192.168.3.1) - OK

  (IP 192.168.2.191) PC2 can ping 192.168.2.1 and 192.168.3.1 - OK
  (IP 192.168.3.181) PC3 can ping 192.168.3.1 and 192.168.2.1 - OK

  BUT...
  PC2 cannot ping PC3 - don't DO NOT WORK
  PC3 can not ping PC2 - don't DO NOT WORK

  (does not work in gateway and router Mode)

  CAN SOMEONE HELP ME UNDERSTAND WHY?

  Your help is very appreciated.

  I bought this unit specifically because she supported routing inter - VLAN!

  Vlaminck

  ---------------------------------------------------------------------------

  Support information:

  Screenshots:
  Belonging to a VLAN:
  VLAN ID Description Inter VLAN device Port 1 Port 2 Port 3 Port 4
  Routing Mgment
  1 default disabled enabled unmarked excluded excluded unlabeled
  2 active active VLAN2 excluded unmarked excluded excluded
  Unmarked 3 VLAN3 active active excluded excluded excluded

  Several subnets VLAN:
  VLAN ID IP address Subnet Mask DHCP DNS Proxy Mode status
  1 192.168.1.1 255.255.255.0 DHCP Server enabled
  2 192.168.2.1 255.255.255.0 DHCP Server enabled
  3 192.168.3.1 255.255.255.0 DHCP Server enabled

  Routing table (Bridge Mode)

  Destination Gateway Genmask Metric Ref use Interface Type flags
  127.0.0.1 127.0.0.1 255.255.255.255 1 0 0 static lo upward, gateway, host
  192.168.3.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg3 to the TOP
  192.168.2.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg2 upward
  192.168.1.0 0.0.0.0 255.255.255.0 0 0 0 static bdg1 to the TOP
  192.168.1.0 192.168.1.1 255.255.255.0 1 0 0 static bdg1 upward, gateway
  127.0.0.0 0.0.0.0 255.0.0.0 0 0 0 lo dynamic

  Routing table (router Mode)

  (Ditto)

  Hello

  It's not because the pings are allowed on the same subnet that they come from a different subnet.

  You probably have a firewall problem windows software because that by default, it removes a different subnet icmp echoes.

  Concerning

  Alain

  Remember messages useful rate.

• Impossible to get a select statement to work

  Hi guys, I tried to get this select statement to work. But it won't be fair
  
  SELECT THE "GEN".
  WHEN'M ' THEN 'MALE '.
  WHEN 'F' THEN 'WOMAN '.
  END OTHER 'UNKNOWN '.
  THE EMPLOYEE
  
  That run, however, I just get unknown ranks.
  
  Summer racking me my brains on this simple thing for a half hour :(
  
  Thanks :)

  HC wrote:

  Otherwise, if I have not ' around GEN, then it says it's an invalid identifier.

  Who says table used has no column named gen. You use SQL * more? If so, publication:

  employee of ESCR

  This will give you a list of columns in the table. Make sure that gen is one of the columns.

  SY.

• G10: How to get S-Video In to work outside Windows MCE

  Hello

  We know how get s-video in a qosmio G10 working beside windows MCE, I can't make it work with Windows Movie Maker, it just says: the material is begin used by other software, but even with just the defult running process, I can't make it work? any Idears?

  Deklan

  [Edited by: admin on 5 August 05 20:22]

  Hi Deklan

  Why I don't know much about windows media center of myself but having just bought a g-20 a week ago.
  I can tell you how I use s-video in, and not with the library itself.

  I don't know what software the G10 came with, but I was using Intervideo windvd creator. This allows me to record tv via s-video and then edit/burn it etc. It saves files in MPEG, you decide the rest. Please make sure that set you it so that he knows that you use s-video of course.

  hope this helps
  Kimberley

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Satellite L500 - impossible to get a wireless modem to work

  Optus modem crashed computer and would be not recognized as being connected, wireless under tension and telstra said also there that modems are not compatible with windows 7. No one including toshiba seem to know blame the new windows 7, had computer 3 weeks and can not use it! someone help me please.so frustrating.thanks

  Post edited by: shanestar
  i'm sure there must be a compatible wireless modem and servers of the program to run that works.

  > Wireless under tension and also says telstra modems that are not compatible with windows 7.
  Sorry mate but I really don t understand your question
  The wireless network card that is installed on your laptop is fully compatible with Win 7 and the drivers are located on the Toshiba WLan portal.

  If you are talking about a 3rd party modem, then I must say that you are wrong here if you have problems with a device any 3rd party then you should get in touch with the manufacturer in your case with modem manufacturer

• Impossible to get 1.3 MEM to work on esxi6

  Hello

  I have a hard time to MEM 1.3 to work on esxi6.

  I installed by the installation script and have dedicated 3 NETWORK card for my iSCSI configuration. the VIB MEM 1.3 is also installed.

  But if I run: ' setup.pl - query - server = x.x.x.x ".

  I get:

  You must provide the user name and password for the server.

  Enter the user name:
  Enter the password:
  No found Dell EqualLogic Multipathing Extension group.

  What could go wrong?

  Ah, now I understand the question. It would seem that maybe there is a bug in the setup.pl script - I'll inform the engineering. The output of the command esxcli indicates that the MEM is installed. You can check this creating a volume and display the default path strategy that has been attributed.

  If you continue to experience problems, please open a Support ticket and ask me to CC would have on the case.

  Thank you

• Impossible to get together-QVWComputer - PersistentClient to work with 8.0 PS Module

  My code has worked on 7.2.1 but I can't make it work since upgrade to 8.0. I'm just trying to assign a user to a VDI, Set-QVWComputer is the only command that I'm having a problem with.

  The error I get is "the specified filter was invalid."

  Example of order:

  Game-QVWComputer-gites "Domain\UserName" (Get-QVWFarm) - PersistentClient-Identity 'VDIComputerName '.

  This "specified filter was not valid" resolved in 32 of the PowerShell 8.0 module version.

  The version that you are using must be greater than 8.0.306.32 - please ensure you are running a current version of the module.