Impossible to install items 14 (10 64-bit Windows), help?

Similar Questions

• Impossible to install SP3 for XP 64 bit don't keep saying updatebr.inf is invalid inf file

  Impossible to install SP3 for XP 64 bit don't keep saying updatebr.inf is invalid inf file

  There is no SP3 for Windows XP 64-bit.

• Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Impossible to install cp1525 reached hp 64 bit of vista windows 99% say that it took too long fatal error try again

  Hi asarabia

  Fatal error documents

  Restore the original factory configuration

• Impossible to install Vista Service Pack 1 through Windows Update

  Hello

  Recently I had to reinstall windows vista home premium 32 bit on my old acer aspire laptop. I did a "clean install", all was well with this operation. I had to install a large number of various updates after doing, now I am notified via windows update vista service pack 1 is available for download/installation. When I try to perform this action, I get a popup window that informs me of what to know before installing sp1, then I reach a window where I have to accept the terms of the software installation. Once I click on the little square and accept the conditions, it goes to another window with two choices... install & cancel, when I click the button install... instead of windows update download and install the update, I am presented with the view of windows update, the update has been installed successfully When in fact it was not. I prefer to install sp1 via windows update, because she was supposed to be a size smaller than the stand-alone version available on microsofts website. Has anyone else had the same question, and if so how do you fix? Of course this laptop is not my main computer, but as it still works very well I continue to use it.

  Thank you

  David

  Hello

  Support for Vista without SPs is complete.

  Use the standalone version for both SPS.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Impossible to install the symantec .exe file, error windows must be restarted

  Hello!

  I recently lived with a problem while installing symantec antivirus, when I try to install or run this file, the error is showking as symantec has detected that the system must be reset to install this... I rebooted several times, but the problem always arises. Please can you solve this problem? Just reply to me as soon as possible if the problem can be solved.

  Concerning

  Mohammed Fahed

  Hello

  1. don't you make changes on the computer before the show?
  2 is the limited with the Symantec AntiVirus installation issue?

  Method 1:
  You can try the steps in the link and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Method 2:
  Perform a clean boot and check if you are able to install the program.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can check if the windows service install is started. Follow these steps:

  a. Click Start, type services.msc in the start search box and press on enter.
  b. in the list of Services (Local), right-click on Windows Installer and then click Properties.
  v. If startup type drop-down list is set to Disable, select the manual option in the drop-down list startup type.
  d. click the button under the status of the service item and click OK.
  Method 4:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Reference link:
  Install programs: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

• 500 error after installing CF11 on Coldfusion 32-bit Windows 8.1

  We have difficulties to get the 32-bit coldfusion11 to work on a 64-bit windows 8.1 computer.

  I followed all the steps in the thread 500 error after installing on Windows 8.1 CF11

  but we still have a problem when we run the admin page 'http://localhost/CFIDE/administrator/index.cfm'.

  It returns "HTTP error 500.0 - Internal Server Error" and we were unable to find a solution.

  All managers appear to be installed correctly and we put the application pool by default "true" to enable 32-bit applications... (PS tried both true and false no difference)

  and security settings are all set to "full control".

  Any help on this is greatly appreciated

  

  

  

  Cool. Which confirms, ColdFusion works.

  Test B:

  1. Can you create a test site in IIS and place a test html and a test cfm page.
  2. Now, go to the html page, and it must be rendered in the browser.
  3. Now, create a connector on the site and access to test html code and test page cfm
  4. If you get the 500 error, then make sure the number of bits of CF and IIS.
  5. Otherwise, if you get 500.19 or any other error, please ensure that you have the permissions on \ColdFusion11\config\wsconfig\

  Let me know the results.

  Kind regards

  Anit Kumar

• Impossible to install the update of security for Windows XP (KB2476490) get error Code: 0 x 80070008

  Help!  I have Windows XP Edition version 2002 SP3 family.  I tried to install the update of security for weeks and get the following message:

  Cannot install get a security update for Windows XP (KB2476490) error Code: 0 x 80070008.   It is said it is downloaded on my PC but have been unable to find it or fix it.  Any help would be really appreciated.

  Unable to upgrade operating system at this time... no money.     Thank you!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/836941

  Hope this information is useful.

• Impossible to install PS Elements 10 64-bit

  Hello

  I bought Photoshop Elements 10. The package contains the 32-bit and 64-bit versions. 32-bit works well under Windows XP and 7. Today, I've disabled the serial number and wanted to install the 64 bit version on my new machine for Windows (64-bit) 10.

  After inserting my serial number and I got the message: "incorrect serial number. Thiès is not a valid serial number. Go back and insert the again serial number. »

  Then I installed the 32 bit version and serial number was accepted as a valid number.

  My questions are:

  1. Why does consider the 64-bit version my serial number as not being is not valid.

  2. How can I install this version?

  I look forward to your suggestions and thanks in advance for your kind attention.

  PES 10 is 32-bit only.

  If you try to install first 10 items, which requires a serial number different than pse 10.

• Impossible to install a Vista clean 64 bit on Satellite P200-1I6

  Hello

  I have the Toshiba Satellite P200-1I6. I've taken over product DVD that works, but I want to do a clean install of Vista 64 bit OS but
  My toshiba do but not any version of Vista - only Toshiba product recovery DVD.

  Someone knows how to fix this?

  Have you installed or included the SATA driver?

  The new laptops are equipped with a SATA controller and this is why you would need to include the SATA drivers that would recognize the HARD drive correctly and would help to insatall the Windows operating system!

  Please use the forum search option and search for similar topics.
  There are many reviews that provides more details!

  welcome them

• Impossible to install LabView 2012 SP1 (64-bit)

  I've got license for LabView edition student of 2012 and I cannot download mentioned MS. Update says I need membership in the Standard Service program.

  Is what it means that I can't download it at all or there is problem somewhere else?

  I'm running on Windows 8 Pro x 64

  Other updates installed without any problems.

  Thanks for the reply

  Hello.

  I guess not. But you can always write your SN [email protected] license and ask them what products including versions are activated with your SN.

  Ondrej

  NIEE AE

• Impossible to install facebook plugin for 32-bit vista

  Windows indicates that it can not install facebook plugin for uploading photos. will not recognize the file, says unknown file. file is install_facebook_plug file cure - in_1.0.3 [1] tried that it is of no help either.

  When I try to install, it says windows cannot recognize the file. [unknown] file bed install_facebook_plug - in_1.0.3 [1] nothing more. I checked to make sure that nothing was hidden. I think that the rar extension but I'm not sure. I tried the file cure and it cannot help either. If I am not able to install the file on my computer.  Thanks for any help.

• Impossible to install any Microsoft OS 64 - Bit in esxi 4.0 or 4.1

  Hi all

  I'm new to this community and I was told by many of my friends who use VMware is the best platform to get answers to my questions. I am currently configuring VMware infrastructure for one of our society. I have faced a problem during the installation of any guest 64-bit OS Microsoft (see attached) in the esxi Server.

  I also enclose the detailed configuration of the server

  My Config servers

  HP ProLiant DL380 G7

  Processor: Intel Xeon E5503 @ 2.00GHz CPU

  I tried a few steps

  1. upgrade the BIOS on HP Site

  2 edited the file .vmx following the instructions of the sub view

  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00970200 & lang = to & cc = us & taskId = 115 & prodSeriesId = 420496 & prodTypeId = 18964

  3 enabled the options in the BIOS below

  • No-Execute Memory  Protection
  • Execute  Disable
  • Virtualization technology (VT)

  Ask you to review and to advise me the reason and a fix for this problem.

  Thank you and best regards,

  thetrojanz

  It will not work. To run 64-bit on a virtual ESXi host clients, you must have at least 8 of VMware Workstation. Please take a look at Execution nested VMs for more details on how to make this work.

  André

• Why can not install Project 2007 in 64-bit windows 7?

  I got a new computer dell laptop with windows 7 64 bit pre intalled. I installed Microsoft office 2007 and it was a success. And now I am installing project 2007, but when I run the seup of it, it gives me this msg "installation impossible to find all the available products to install. Help, please.

  Hello naf2010,

  Thanks for posting on the Microsoft answers Forum.

  Project 2007 is compatible with Windows 7 32-bit and 64-bit.
  How do you run the installer? How are you connected? User administrator or Standard?

  You have versions of Project 2007 trial or the trial versions of Office installed? If so, uninstall them first and then try again to install Project 2007.
  After uninstalling, restart the computer and then try to install again.

  Look at the following article by clicking on the number:

  KB 971179 - how to uninstall suites Office 2007 so I can't uninstall it by using the function "Add / Remove Programs"?

  If please reply back and let us know if it helped to solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to install the Cisco VPN Client on Windows 7

  Hello

  After an uninstall successful VPN Cisco version 4. I try to install the Cisco VPN Client 5.0.07.0290 version.

  But after the launch of vpnclient_setup.msi, the wizard starts. When I click on the next button, I get the following message: "installation ended prematurely because of an error".

  As an attachment, I add the details of the discovery of the error in the logs of windows (logError.txt) and the logs generated by the MSI installer in verbose (log2.txt) mode.

  My computer is a lenovo W500 with Windows 7 64-bit and 4 GB of memory (compatible with the requirements of the Cisco VPN Client).

  I have administrative privileges on this computer.

  Please help me!

  I need to use it to connect to my corporate network.

  Thanks in advance.

  BR

  Jerome

  If you want to try another software, I know that works I used it up until cisco came out with a 64-bit client there. Is the 64-bit version of shrew 2.1.0 it worked very well, you will just need your file FCP of cisco for import into if you have. This will tell you if the client or your system at least.

• Install Adobe CC on 64-bit Windows

  I'm having trouble installing Adobe CC on a 64-bit computer to windows from a package that I created. I created the package several times for a device license and he moved each time. The only time where there is no shortage is when I create a package for the "log in" (for lack of better term) license is the license that makes you identify yourself before use. I have attached the logs, any help would be appreciated.

  https://drive.Google.com/file/d/0B0ZdT_omdsKuSVBvSEFtUDlwLXc/view?USP=sharing

  Packer links https://forums.adobe.com/thread/1586021

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent