Impossible to push configuration to Distributionswitch Capability.DvsOperationSupported is false

Similar Questions

• Impossible to manually configure the wireless settings.

  I have an Apple Time Capsule of 7.7.7 version and no matter what I do I can't seem to accept my manual settings wireless.  My building a House requires several APs to provide adequate coverage, and time Capsule keeps selecting wireless channels that are in conflict with other access points in the House.  Does anyone know of a work around that will allow me to force the desired channels? I use a Windows PC 10 with Airport Utility for Windows version 5.6.1 configure time Capsule. Here are the steps I followed:

  -Select the "Time Capsule" on the left side

  -Click on the "Manual Configuration" button at the bottom

  -Select the tab "wireless".

  -Radio mode - menu drop down select "802. 11A / n - 802. "11b / g ' (very intentional)

  -Radio channel selection - I select in the drop-down "manual."

  -Select 'change... '. "and choose"36"for the 5 GHz channel and '1' for channel 2.4 GHz, then 'Ok '.

  -Select "Update."

  After restarting the device, I check the settings and I find...

  -Radio mode is back 'automatic '.

  -Selection of the radio channel is 'Automatic' and channels do not necessarily match what I selected initially.

  Someone at - it advice?

  The main problem is that the version of the AirPort for Windows utility is not designed to work with 802.11ac airport base stations. Unfortunately, Apple has not updated this utility since Windows 7.

  The other problem is that Apple has "dumb - which crashed" AirPort Utility for Macs and the iOS devices with version 6.x. One of the things that he removed has the possibility to define patterns of radio and channels that "stick" to the 802.11ac base stations.

• Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.

  Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer

  I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode.  Configure XP mode and when it asked for a password that I left it empty and press to enter.  When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.

  I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode.  I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer.  Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.

  There are two user fence: virtual XP-admin and virtual user of XP-88950xp.

  The only program I installed XP mode is this one.

  Thank you.

  Hugh Humphreys

  Hi Hugh Humphreys,

  Leave the password empty section and see if the XPMUSER can be accessed.

  Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:

  (a) Firstly, disable the integration features.

  (b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)

  (c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.

  (d) log in Windows by using the administrator account and the password.

  Note: The password is empty by default unless you already set a password.

  (e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.

  (f) choose the user you want to change and click 'reset password'. Set a new password.

  (g) click on "Advanced" tab, click on the button "Advanced".

  (h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".

  (i) check the "password never expires". Click on 'OK'.

  (j) then exit the settings and restart Windows XP Mode to normal mode.

  Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:

  (a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.

  (b) set a password for your current user.

  (c) click on tools on Windows Virtual PC, choose enable integration features.

  i. type the password, check the box "Remember my credentials" and click OK to open a session.

  II. after joining the domain, logon in XP mode with the local administrator account.

  Reference: http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/45f3f241-3d0a-43f7-8baf-c64ab3a8a76d/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  If this does not work, post your request in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• Impossible WRT160N access configuration through internet page explore or firefox... All other sites work well

  I can not access the router configuration page. I used internet explore 8 and firefox. I get a message that the Web page cannot be displayed. I type in //192.168.1.1 I am able to ping to the router address and can see the details on ipconfig/all. I also running norton firewall. I turn it off to see if that is the question. I don't know what the problem is.

  Ray

  Have you tried to reboot the router?

• configured with failover capability n/a

  Hello

  My configuration of cluster HA doesn't seem to work.

  The virtual machine failover does not work.

  I noticed "configured failover ability n/a" in the summary of the cluster tab.

  I was looking on the internet but can't find a solution.

  Can someone help me please.

  I'm test for my boss.

  We are currently working with linux (drbd and KVM) the virtualisize.

  But we want to implement a better solution.

  Thank you!

  John L.

  Hello

  I found the solution.

  I cut all the CD-ROMs of the virtual machines.

  And now, he is able to fialover!

  Thanks for the people who have tried to help him!

• Impossible to deploy Configuration

  After this article, I can't deploy configurations. Here is the error message I get:

  vCenter Lab Manager could not find pools of hosts or resources to deploy those virtual machines.

     at LabManager.Backend.CDeployableVMContainer.DeployVMs(DeployOptions options, CVirtualMachine[] vms) 
     at LabManager.Backend.CDeployableVMContainer.Deploy(DeployOptions deployOptions, List`1 vmList)

  My hosts, data warehouses, and Resource Pools all seem to be OK and online. vCenter seems to operate normally.

  Any ideas on how to fix?

  Thank you!

  weird... uh... Is there still a pool of resources assigned to this organization and the workspace?  The message is as if there is no compatible host.

  1. the need to ensure that we have a cluster/host/PR assigned to Org and workspace

  2. check the physics of networks, to ensure that each ESX host has successfully bound to it

  3. ensure that the data store where the virtual machines are available for each ESX host and are enabled for the provision of the VM.

• Impossible to update app: CFBundleVersion in info.plist is false

  I want to update an application (switch WoodWing booth at DPS kiosk) and the new binary to send the message is "this set is not valid. CFBundleShortVersionString key in the Info.plist file must contain a newer version than the version previously downloaded"

  It's the old version upgrade

  

  Contact Adobe Support Gold with your Builder/DPS Viewer builder id application and the name of the application, the required version number or you can send me a PM with all your details.

• E-mail blackBerry Smartphones e set up impossible?

  Recently, I bought a curve 8520 to replace my old model Pearl. It has an e mail set up wizard which only offers an option of blackberry e mail. I want to load my own e-mail but prove impossible. I went back to the store where the techno leader spent two hours before sending me away with opera mini installed saying who should do.

  Still no joy I have loaded information old Pearl in new phone my emails have changed if I don't want that appear now. Any ideas?

  Hello and welcome to the community!

  This "tech head" you talked about their profession. Not at all. Indeed, they you brushed OFF... inviting you to use Opera? Inexusable IMHO.

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• Problem blackBerry Smartphones with e-mail on BB 8520 configuration

  I can't configure my emails on my BB device 8520.

  When you perform the e-mail Setup Wizard I have only the ability to create an email account with Blackberry Enterprise Server. I can't find the option to set up other accounts such as gmail or other emails.

  Can someone explain how I can solve this problem?

  Thank you

  Hi and welcome to the Forums!

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers host BIS BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  Good luck!

• Impossible to pass boot config

  I am trying to upgrade my vista home Prem for wind 7 home Prem I have a drive. When I try - it stops & 'impossible upgrade boot configuration' when I check msconfig, it says just "vista home prem' under the boot section. Help

  Hello

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is the Forum of installation of Windows 7 for questions about installing Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Push registration: (Berr java.lang.IllegalArgumentException) network error

  Hello

  We try to get WebWorks push the work but are a problem with blackberry.push.openBISPushListener. The onRegister function returns a status of 1 (network error).

  The log file shows the following:

  11/9 10:00:54 W net.rim.blackberry.api.push - Berr java.lang.IllegalArgumentException
  11/9 10:00:21 a Contapp - PushDaemon is started.
  11/9 10:00:21 a Contapp - Register push application
  11/9 10:00:21 a Contapp - open BIS push listener
  

  This application is used to work so I wonder if something might have changed in the upgrade of the server push.

  The application code is the following:

  And the following push configuration in the config.xml file:

  
  
  
  
  
  
  
  
  
    BIS-B
    MDS
    TCP_WIFI
    TCP_CELLULAR
    WAP2
    WAP
  
  
  
    read_device_identifying_information
    access_shared
  
  

  It is all tested on a device 9300.

  Any ideas as to why we get this error?

  Thanks in advance for the help!

  Nick

  This issue should now be resolved, please let me know if you continue to have problems with the registration with the EVAL server.

• Help blackBerry Smartphones! There is no option available on my handset email configuration

  He was bought as a new unlocked phone and I can not set up an e-mail account. It does give me not the option in the menu only to create an account with the company of bb Server! I've been on the support pages and he says that the PIN and EMEI do not match! can anyone figure a way around this? Thanks in advance!

  Hi and welcome to the Forums!

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers host BIS BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• PHP push notification - type registration

  Hello
  I need to send notification messages to peripheral bb10 using my server PHP script. I used the form of evaluation of the BlackBerry Push Service to register, select BlackBerry Internet Service transport for growth and Essentials of push Blackberry as Service Push type.

  I checked the posts, which one who seems to have been resolved (http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Problem-with-SEND-Push-Notificati... and making all kinds of changes to the data to be sent and headers, but not luck: push server does not respond (curl_exec is false) and attempt to parse the xml ends with error)
  An XML parser error occurred
  End of the invalid document

  The sent data now have the form:
  $data = '-'. $boundary.
  '
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.DTD">
  
  

  
  
  
  ' .
  '--' . $boundary. "\r\n".
  "Content-Type: text/plain". "\r\n". "
  "Push-Message-ID: '." $messageid. "\r\n\r\n".
  stripslashes ($message). "\r\n".
  '--' . $boundary. '--';

  And transfer curl options are defined as:
  curl_setopt ($ch, CURLOPT_URL, "https://cpXXXX.pushapi.eval.blackberry.com/mss/PD_pushRequest"); (replaced with email of record value xxxx)
  curl_setopt ($ch, CURLOPT_HEADER, false);
  curl_setopt ($ch, CURLOPT_USERAGENT, "SAA push application");
  curl_setopt ($ch, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_1_1);
  curl_setopt ($ch, curlopt_buffersize, CURLAUTH_BASIC);
  curl_setopt ($ch, CURLOPT_USERPWD, $appid. ':' . $password); (replaced appid and password with the values of the registration email)
  curl_setopt ($ch, CURLOPT_POSTFIELDS, $data);
  curl_setopt ($ch, CURLOPT_SSL_VERIFYPEER, false);
  curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
  curl_setopt ($ch, CURLOPT_HTTPHEADER, array ("Content-Type: multipart/related;")) Boundary =". $boundary. "; type = application/xml"));

  2 attempted to use javascript to POST XMLHttpRequest in a page on the same server. The result was:
  XMLHttpRequest does not load https://cpxxxx.pushapi.eval.blackberry.com/mss/PD_pushRequest. No "Access-Control-Allow-Origin" header is present on the requested resource. So, the original 'http://my_server_address' is not allowed access.

  3. I used the same code XMLHttpRequest in webworks launched from z10 camera app (the code can be found here - https://github.com/blackberry/BB10-WebWorks-Samples/tree/master/pushCaptureBasics/pushInitiator) and
  Here is the result:
  
  .. .and the Capture application seems to take notice, by launching again push (does not display the message, but it's another thing ).

  The only thing that now comes to my mind, it is that the push server does not accept my server push messages. But how do I solve this problem?
  Any guidance is appreciated.

  Well, glad to have found a solution to this: after obtaining the references of Production Service Push BlackBerry have used their and it actually works with this code here http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Cannot-send-PHP-Push-message-usin...

• Smartphones blackBerry Email Setup - Option Missing to add existing emails

  Hello

  I use a Blackberry storm 2 9520 / on O2 Germany. I recently tried to set up an email on my phone (Hotmail) account.

  -L' e-mail setup wizard shows me however that option:

  "I want to use a professional email with Blackberry Enterprise Server account"

  -It does not show me the option: "Add an existing email account option" (as mentioned in your E-mail configuration page: http://us.blackberry.com/support/blackberry101/setup.jsp#tab_tab_email )

  Can you please guide me here?

  Hi and welcome to the Forums!

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!

• BlackBerry smartphones migration from business to personal

  I just got my blackberry 9800 torch. I bought on ebay and did not because it's a business phone.

  I don't have a business account and I would like to find an option 'restore' or to 'turn on' personal characteristic such as the configuration of e-mail (google mail).

  I'm new to blackberry and I would appreciate comments and help.

  Thank you

  Frank

  Ahhh Yes... as I suspected... is not that the BB is set up for the company, is that it is not yet configured for personal messaging...

  To use the Push RIM owner messaging capability, you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have a compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), then you will have personal email added to the e-mail Setup Wizard.

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  Good luck!