Impossible to uninstall after help file missing error.

Similar Questions

• several errors at startup related to the file missing error rasman.dll

  several errors at startup related to the file missing error rasman.dll

  Hello

  1 did you changes to the computer before the show?
  2. What is the exact error message or error code?

  I suggest you perform the clean boot and check if that helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  It will be useful.

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• Files missing error on home page

  Hey there,

  I've recently updated my Muse the latest version and since I published my site I get this error message on my homepage:

  "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  There is no file missing in my property that I see. The page is www.steannes.com

  I publish my site to Business Catalyst. Any ideas?

  Well don't know what it was but I did an entire third site publish today and the problem disappeared.

• Cannot open Help files Excel, error message "couldn't be read on this version of Windows.

  Original title: WinHlp32.exe

  I have a few help Excel files regarding the functions of macro 4 I need to access.

  When I click on the file I got a message saying that the help file could not be read on this version of Windows and that I go to Wicrosoft support

  When I'm on the Microsoft technical support, I see a link to download the file WinHlp32.exe for Windows 7

  When I click it it brings me to the Windows Genuine Advantage download page that I should run to access the WinHlp32.exe file

  I download the Windows Genuine Advantage and tried to run but I got a message that this virsion of the validation tool is not taken in charge more and I need to download the latest version I can not find...

  grrrrr!

  I found the download file on the net and tried to run it... the result is that I got a message that this update does not apply to that computer...

  Grrrr!  Grrrr! Grrr!

  Is my version of windows: Windows 7 family premium, version 6.1, service pack 1

  The question is: how to open these old help files?

  Hello

  Faced with the issue only with the Excel Help files?

  I suggest you try the procedure described in the link and check if it helps.

  I can't open the help that was created in Windows Help format (WinHlp32.exe)
  http://support.Microsoft.com/kb/917607

  I hope this information helps!

• Table of contents in Microsoft Help file missing expand buttons

  First of all happy new year to all

  I'm having a problem with a microsoft generated help file that causes the buttons develop on the TOC to disappear.  The help file works as expected outside this irritation.  Here is a screenshot of the doubtful TOC:

  

  I'd appreciate any help that I am a bit puzzled.

  Thank you

  James

  This is controlled by an option in your single source available properties. Click Change next to the field "Advanced settings". From there, click the TOC Styles tab and select the option "Plus/Minus square. If this is not available, select the option "root lines.

  

• Impossible to uninstall programs. Display the error "Database Manager Shell is damaged or missing"

  I accidentally deleted a .dat file in the folder of the program data. After that, I restored the computer to an earlier date. Yet, I could not uninstall Nero. I then restored it from the current date. But it always displays this error if I try to uninstall Nero. When I tried to uninstall the weather channel Office it shows another error "Couldnot open INSTALL. LOG file. However, I was able to uninstall the Yahoo Messenger. Could someone help? I really want to uninstall these programs.

  Hello

  Download and install Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Run revo and use it to uninstall the software.  Make a right click on the program icon you want to remove and select uninstall.  Initially, this will launch the applications own routine that may still fail, but simply to continue Uninstall.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once the uninstall is complete, reboot the PC.

  Kind regards

  DP - K

• I need help with some files missing error Muse - crazy customer

  I get the error that some files are missing or incorrect. I have cleared the cache, I downloaded all the two to Muse, FTP etc. I cleaned the server and reloaded. Make the same mistake everywhere and can not find out what is happening.  www.Authorizedagents.com is the Web site. Site is horrible, but looks great in the preview. I'm in trouble

  Thank you

  Call your hosting provider. The hosting server is back a '503 Service temporarily unavailable' error rather than serve properly good number of files of your site.

• Install Wizard fails in WIN7 - file missing error?

  I had printing problems recently with my C6180 all-in-one printer.  For some reason, the print jobs have been suspended in the spooler or somewhere in the network (not sure yet but because of this new problem).  I've decided I want to uninstall then reinstall the printer drivers in the hope that the driver has been corrupted.  Uninstall seemed to go ok.  When I tried to reinstall, the wizard fails every time just after the screen where you can select which components to install and you must accept the EULA.  I get an error popup that says: "the system cannot find the file specified."  He didn't tell me which file it needs, and ends the installation at this point.

  I've tried everything I can think of doing work - cutting the antivirus (AVG & Windows Defender), stop out-no Microsoft, installation services in safemode, I went into my system and removed all the HP files I can find and identify, and I followed several different patches, I found here and online.  All fail at the same point.  HP does not have a newer version of the software (AIO_CDA_FSW_Full_Win_WW_130_140.exe), but I downloaded it again just to be sure.

  I think it's probably a Windows file that it is absent, but I really have no way of knowing for sure.  You would think that with a 300 MB installation file, they understand all the * beep * the files needed to install in itself!

  My system is running Windows 7, 64-bit with all latest updates.

  I'm at my wits end now and all ideas!  Can someone help me please?  Thank you!

  Finally figured it out!

  I uninstalled HP Solution Center again completely and reinstalled once more.  This time he actually found my printer, although he posted only the wireless configuration.  I thought it was weird, because I had the ethernet cable is connected and the wireless off.  I tried several times in different ways so that it can establish a connection, but whenever he failed and told me to turn off my firewall, etc..  I tried with and without the firewall.  Nothing did not work.  I therefore decided to return to my router settings and check again for any problem here.

  The control panel of my router is very basic and almost no parameters to be set.  I reinstalled the software of the router and now, I had total control of all the options I want.  One thing jumped out of me almost immediately - my C6180 and my Chromecast both share the same IP address!  Go figure!  I'm gone in my printer, changed the IP, rebooted the router and re-directed the installation of device HP program.  It went pretty well, except for hanging them on one of the screens.  I force closed, and Installer picked up right where it hung and continued the installation successfully.  Printing and scanning now work correctly.

  Thank you very much for your help!

• 'Impossible to restore' and impossible to uninstall Roxio application files

  I tried to install Roxio 2011 Pro.  A problem with video files so tried to repair.  Now, I'm unable to uninstall Roxion 2011 Pro and am now unable to restore to an earlier date. Tried to follow the instructions of the people of Roxio, but nothing helps

  Hello
  1. What is the error you get when you try to uninstall Roxio 2011?
  Search for related errors in Event Viewer
   
  A > follow the steps below to uninstall Roxio 2011 and check if the problem persists.
   
  Step 1:
   
  I suggest that you follow the steps in the link below and check if it helps.
   
  http://KB.Roxio.com/search.aspx?url=/content/KB/creator/000207CR¶ms=set-locale=en
   
  Note: The above article is for Creator 2009 and 2010. It may also hold good for Roxio 2011.
   
  Step 2:
   
  Try uninstalling in a clean boot State, and check if you are able to uninstall.
   
  Note: Restart your computer in normal mode after uninstall. Follow step 7 of the link.
   
  B > what error message do you get when trying to do system restore.
   
  Follow these steps and check if the system restore works very well.
   
  Step 1:
   
  Disable all security software and check if the problem persists.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
  Do you have an error message when you try to perform the system restore?
   
  Try to complete the restore of the system in safe mode and check.
   
  Note: Restart your computer in normal mode after uninstall.
   
  Note: You will lose all the restore points when you perform system restore in safe mode.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Impossible to uninstall/install the software printer, error message.

  LaserJet 1006

  Windows XP

  I have recently been unable to use my printer because it (for some reason any) is more loaded into my computer (software).

  I have tried both online and using the printers software disk both uninstall AND install without success. Since I did a computer search on HP 1006 and deleted these files (thinking it would be like an uninstall, it wasn't). When I go to "Add/Remove programs it lists the printer and indicates that the file size is 4.13 MB." When I click on it to remove the file I get a pop-up error with the title: "Microsoft Visual C ++ Runtime Library' and it reads: Program:...-HP\{175f6cb4-fd39-4311-8588-d7486c05c52c}-\uninstall.exe.

  He continues to say, "this application has requested the execution to terminate in an unusual way. Please contact support team of the application for more information. »

  Any help is appreciated.

  Hi Iceman107,

  Unfortunately, because the problem is with the operating system and the printer works fine other computer. The only suggestion I can give at this moment would be to back up your data, and finally a complete system recovery on this computer or you can contact Microsoft about issues with the operating system. I can't suggest that you run programs that you look, especially if the Publisher could not be verified.

• Impossible to uninstall cam Cyberlink U 5, error: 1158.

  Original title: uninstallation problem

  I have installed Cyberlink Cam 5 u. It s not working do not. I want to uninstall but it s is not possible. (The error message comes 1158) How to uninstall this software? It s creating a problem when using system d. Please help me.

  Hi Steven,

  If you encounter problems when applying for UN-installing, follow the steps below.
  Download and install the trial version of Revo UN Installer.
  Here is the link where you can download revo uninstaller
  http://www.revouninstaller.com/
  You can uninstall the Revo software.
  Let me know if this is useful for you.
  Kind regards
  Momo.

• HP Pavilion Notebook: Mfc120u.dll AcceleratorSt.exe - system file missing error and BTServer.exe - Application error

  I get the error message "system error AccelerometerSt.exe) mfc120u.dll is missing.  I was not able to find a reference to this dll missing accurate regarding the AccelerometerSt.exe.  It seems that the AccelerometerSt.exe is the HP 3D DriveGuard software.  In my view, that an update has been installed.  How can I fix this error?

  And also I can find an Application error error - BTServer.exe

  Please give some solutions to this problem...

  Hello

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  Once done, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet once, once done, reboot the laptop.

  Kind regards

  DP - K

• Impossible to uninstall Kodak Easy share, get error Vista Db.esx.

  Original title: uninstall probs...

  I have a vista operating system... iam have probs continually re: explained above popups...

  Re: too many EasyDownload Manager & kodak easyshare...

  I get 3 different popups re: easy download manager & kodak easyshare - which I have already

  uninstalled... for the simple download manager, it is said: 'Vista not found DB.esx component... ".

  Also re: easyshare it says: 1 or more system DLL could not be loaded: EASpp.dll...

  A popup also says "unable to boot easyshare" - when I already uninstalled it it... also the easyshare software is no longer made...

  Thank you

  E-mail address is removed from the privacy *.

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the specific program?

  Method:
  Vista DB.esx is a file that is used in the Kodak Easy Share software. I suggest you to uninstall the software by using the Kodak Easy Share clear utility. ESApp.dll made reference to the easy share Application file.

  Disable the utility for KODAK software

  http://www.kodak.com/global/en/service/downloads/private/xp_vista_98_ClearUtility.jhtml?App_Code=essw&os_code=Vista&continue.x=32&continue.y=10

  If you are facing problems to uninstall the program, I suggest you run the fix it convenience store and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  For more information refer¨ http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/vista-dbesx-not-found/f34b0dfd-59e4-4f35-8bc0-3f6924cb250a

  Let us know if it helps.

• output file missing error

  windows xp ser pk 3 starts I get missing output file in the dynamic library. Can someone tell me how to fix this problem. I can't find an answer anywhere.

  Something is apparently from Windows and failing. You should know that something is and troubleshoot accordingly.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!