Impossible to uninstall some programs plug-and-play

Similar Questions

• How can I reinstall the non-plug-and-play drivers that I have uninstalled mistakeningly?

  I have a Dell Inspiron and recently started having random blue screens, close down and the inability to get out of hibernation with her. I ran Microsoft Security databases, and he is found to have viruses Alureon.A, whom he said he eliminated, but when running - it again, it was in Quarentine. Tried to get into SafeMode w / networking to remove and it quarentined again. Return to normal and it works, it shows up again!
  I did some research on Google and found another way to remove it by devmgmt.msc and could not find the file that it supposed to delete. A next post had a list of non-plug-and-play drivers, and I misread this post and uninstalled the files he had. Reading - it a second time, they were not the drivers to uninstall! So now I uninstalled the drivers, that I should not have, and I'm afraid to turn it back on. What should I do? Is there anyway I can get these drivers or is it easier to reinstall Windows Vista all together and fix the drivers and get rid of the virus?

  I was also unable to update Windows with this virus, with MSE.

  Accidentally uninstalled files were:
  A sound signal
  HTTP
  NDIS system driver
  NDProxy
  Null value
  RDPCDD
  Remote Access Auto Connection Driver
  VgaSave

  First of all, I recommend you download and run the program below.  It's the only one I found that systematically identifies and removes infections Alureon.

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  So, I see two possibilities. Sfc/scannow in an elevated command prompt might reapair missing files and is worth a try.

  If this fails, try the system restore.  It is a risk and could fail and possibly further damaging the system.  If If is running it will probably restore the infection as well.  In this case, restart TDSSKiller and other malware analysis.

  Although I always discover a wipe and reinstallaton ultimately, it may turn out to be necessary in your case.

• I have change directry with reg edit now impossible to uninstall a program and cannot sett advance adjustment system

  I have change directry with reg edit now impossible to uninstall a program and cannot advance the system put forward sett it was drive c was my default directry, but I put as a default and no command does command-line pls tell me how to set the drive c again as defaulat I use vista. can't open the registry.

  I have no backup also cannot restore

  Hello

  (1) why you did registry change?

  (2) you receive an error message when you try to uninstall the program?

  (3) do you have with you Windows Vista installation disc?

  I suggest trying this method and try to install the program.

  Problems with programs that cannot be installed or uninstalled. http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If the problem persists always, respond with more information for you to help.

• Plug-and-Play and DEP stop computer

  Randomly, my computer tells me that there was a problem with the Plug-and-Play and Data Execution Prevention must shut down and restart windows. This happens everytime I turn on my computer in 10 minutes, even if I do not open a Web page. I ran scan from Microsoft, Windows Defender, and Norton Antivirus. No virus or detected problems. This just started 3 days ago. I have not recently downloaded any new program. Does anyone know how to fix this?

  Hello

  You could try a system restore before it starts HOWEVER I wouldn't back to. better to solve
  the question because if you perform the restore you may lose the changes you have made and the problem is likely to
  come back. The onlyreason I mention this so that you know the possibilities if someone else
  He suggests here or via other communications you might try. System Restore is ok on some points, but
  last resort for this one.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  You said Norton and it could well be part of the problem. You others have on this machine EVER?
  (Windows Defender and MRT Scanner are fine).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can t get the dvd is plug and play no response

  For some reason any can t get dvd to the plug and play have teenager who could hepatitis changed something

  Hello

  1. What do you mean "t get to dvd don't plug n play no response"?

  2. using a cd/dvd external drive?

  3. what program you're using to play the dvd?

  If you use an external dvd drive and it is not detected, then run the hardware and devices Troubleshooter

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the DVD drive is detected and the disc is not read by the cd/dvd drive, follow

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  Answer with the information required to help better.

• [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

  Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
  I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

  I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

  However, FixIt said that he was unable to solve the problem and discs are still read.

  I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

  Any ideas?

  Thank you!

  Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Plug-and-play webcam problem

  I installed a webcam plug-and-play. All the drivers were successfully installed and it is listed under devices as being upwards and running, however I can't find anything to open it and use it. Help?

  Hi Raldir,

  It would be great if you could answer these questions to help you further.

  1. what happens when you try to access the webcam, summers - get you any error message or error code?

  2 have you made changes on the computer before this problem?

  3 are you referring to a webcam in the generation?

  This problem can occur because of driver or settings problem, try the following methods and check if it helps.

  Method 1:

  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  I suggest you to uninstall and reinstall the webcam and check if it helps.

  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope that the information provided is useful.

• Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

  Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

  Now, after a few days looking for a response, I decided to ask the guy who made the game.

  The error message also appears when I download just 2 service packs of Microsoft also.
  I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

  Original title: fsx gold edition...

  Try this, it worked for me:

  (1) uninstall normally from the control panel.

  Reinstall 2) in the Windows directory (C: here)

  (3) install SP1, SP2

• Satellite L350 - no sound after uninstalling some programs

  Hello

  I just bought a Satellite L350 and I started uninstalling some programs.
  Since then, I have more no sond.
  I guess I uninstalled too much and I would like to know the program I have to reinstall and where I can find it.

  Thanks fo your answers!

  Hello

  Why you n t use the Restore tool of the Windows system that would help you to define the operating system back to the point of time at the beginning?

  I guess you deleted the sound/sound driver software and the System Restore tool should help you recover this software.

  Go to start - all programs - Accessories - System Tools - System Restore
  Then, select choose a different restore point. A choice, a restore point dialog box appears. Choose a restore point and click Next.

  Check it!

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.

• EliteBook 8540p: is the engraver of DVD 595759-001 for Elitebook 8540p plug-and-play

  I have a DVD ROM drive, only in my 8540p here, and I just ordered a DVD (595759-001) burner to replace it with. Just install the hardware? Is this going to be a plug-and-play experience, or I need to find drivers for the replacement? Do I need to uninstall the driver for the original DVD ROM?

  Hello

  The driver for any optical drive is provided by Windows, then you should just connect the new device, but it can sometimes avoid problems by doing this as follows.

  Hold down the Windows key and press R.  In the run box, type devmgmt.msc and press ENTER.  Expand the DVD/CD = ROM readers, made existing right click the device and choose uninstall.

  Once completed, stop the laptop and made the new optical drive.

  When you start Windows, then, give it a few minutes to load completely and you should find the new drive is running.

  Kind regards

  DP - K

• Plug and Play drivers: Instrument of Identification error (pumps Ultra PHD at Harvard)

  Hi all! I use the LabView drivers to control a unit of Harvard pump 70-3007 and fall on some issues. (I'm controlling through the USB port).

  Driver:

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=16026

  Plug-and-Play site:

  http://www.NI.com/white-paper/3271/en/

  So I downloaded and installed the drivers and made sure that I have ALL the necessary software (USB virtual COM and VISA) installed. I then used teraterm (serial port communication software) to make sure my computer can communicate with the pump. He could.

  I then moved in labview, to make sure that my computer can control the pump. He couldn't. As soon as I try to screw attached with the drivers, I get an error. The first step in each VI is to call an Initialize.VI that makes a 'Identification of Instrumentation' stage, which always generates an error. He tells me that either I have wrong COM port (I assure you, I did not) or that the instrument drivers are not updated. HM.

  Any ideas? Of course, I know probably no one here has used this series of pumps before, so if there is no additional information / screws I can join, please let me know.

  
  

• Agilent 4156 new driver plug-and-play (pulse-installation problem)

  Hello, I am new to Labview and just started using the Agilent 4156 new plug-and-play driver published on 02/12/2008. I try first to set up conditions of STRESS using this project. While I am able to configure most of the things that I need, I can't set the peak pulse value using the program "Set Pulse.vi". The Readme for the driver mentioned that this program has not been tested. The error message is the following:

  Reports of the instrument:
  + 181, "illegal installation. Invalid command. »
  -113, "undefined header."
  + 0, "no error".

  Can someone help me with this problem?

  Thank you.

  Thanks for your reply.

  I think I solved the problem. There are syntax errors in the "set up" Pulse.vi (PUL has been used instead of PULS in two places). He is now able to set the basic and advanced.

  In addition, the way is designed the vi, it will always give an error because he tries to put in tension (possible only when a VIEW is of type V) 'Source' and 'Base' / 'Peak' tensions (only possible when the PGU is a type VPULSE). I removed the parts that I didn't need.

  FYI, I use an Agilent 4156 C. In the configuration screen, the revision of the CPU is 1 and the revision of the software (03.06 HOSTC, CUMS 04.07, ADC 01.00).