recovery disk says not supported

Similar Questions

• System recovery disks do not support this computer

  Two weeks ago, crashed my HP Pavilion Elite HPE - 480 t hard drive model.  It is a 1.5 TB came with the PC.  I bought a WD 1 TB hard drive and installed.  When I used my recovery discs, I received a message, "the system recovery disks do not support this computer.  You are not able to restore this system with these discs. "Because I had never used these recovery discs, I assumed I had their damn so I bought authentic system recovery disks from HP.  Yesterday them - even received training as before.  I called HP tech support and I was told that those recovery disk works with a hard drive that is identical with the original hard drive.  Located between the two hard drives that the original HD had a 3 GB/s, and the new is 6 Gbps.  Is this correct?  They "graciously" offered replacing my new hard drive with a hard drive that works for only $180.  Seems a little steep, but I am confused.  Is system of technical recovery disks?  I would like another opinion.  If buying a new motherboard out me of this?  If someone knows a resolution to my situation, I would be very grateful.  Help!

  Hello

  In fact, you have more options that will avoid spending more in $$. The first thing I would try is the utility that provides HP. It is used for when the set of recovery disks does not work with a new hard drive. Follow the instructions of this web document.

  View your results. If the results are negative, we can install the operating system on your new hard drive with another method.

  What is the WD SATA drive model you purchased?

  Erico-

• System recovery disks do not work.

  I have a HP G62 339WM Notebook PC with Windows 7 Home Premium 64-bit.  I bought by mail, system recovery discs and they do not work.   And my HP Support Assistant displays "an error has occurred" and end not updates.

  The Troubleshooting Guide for the recovery started from CD or DVD says: "update the firmware of the drive. This is especially true if the disks were received from HP customer service by mail. The firmware of a DVD player (the pilot) isn't able to recognize the support of recovery disk which was created using a newer DVD manufacturing process. Download and install updates on the firmware of the DVD available at HP that corresponds to the type of DVD drive on your computer. »

  How do I update the firmware of the player when my HP Support Assistant would conduct no updates.  I downloaded the latest Hp Support Assistant and he always always says "an error has occurred."

  My laptop model has no updates from HP.

  As new as your laptop is I doubt you need a firmware update for the CD/DVD drive.

  Could you give a little more detail also the recovery disks do not work. For example you get an error, or is the laptop just not boot from them and goes directly into Windows?

  Have you tried to put the first disc in the drive, shut down the laptop, wait a minute or two and turn on the laptop, start typing the ESCAPE key to get the menu. Should be an option of F9 to select the boot device. Select the CD/DVD drive and press ENTER.

• Satellite A50 - recovery disk is not working

  Hello

  I'm trying to do a clean install on my laptop, but the recovery disk is not working.
  The files transferred to the laptop, but once done, I get an error message that says: "the system is not fully installed. Please run Setup again."

  Does anyone have suggestions as to how to fix it?

  It took me four days to get to this point and make me very frustrated.

  Thanks heaps

  Naomi

  Hello

  What is the installation using another CD; That is to say the Microsoft Windows XP disk?
  Have you tried that?

  In my opinion, this would help to pinpoint the problem
  The error message can be linked to different issues; I mean the HARD drive or a single partition problem could also be possible.

  Try to format the drive HARD whole again. Delete all partitions from the HARD drive and check if you can proceed with the installation.

  But if you will not be able to install the OS by using the recovery disk and other disks then a question must relate to a part of the material. (possibly HDD)

• Lenovo system recovery disk will NOT install!

  I have a Lenovo Y410 7757 - of course, Vista has been preloaded... but I Leenovoo system recovery disc.  Although the HARD drive has failed... I replaced it - but the dvd player does NOT have the Lenovo recovery disk (drive just whirs/stops...error "PXE - E61 MOF Media test failure, check cable;) Out wide com PXE operating system not found); and I can't mount the HARD drive clone or use the media to start (on my free agent).

  Works to the DVD... it read and ran my XP Pro upgrade disc (my office is XP) - works of System Mechanic drive (although it is bed/open-then "Unloaded QDMA")... but NOT the Lenovo recovery disk! Not the NOVO button... NOTHING!   I even tried to partition the new disk - for a dual-boot - market with XP (because it worked).  Now, I have installed XP Pro upgrade and work – but I can't use the recovery disc, or EVEN mount the clone...!  I hope I'm missing obvious detail, little... in the meantime, I get out my hair in frusration near pullng balBALD! I have been without this laptop for over 2 weeks!  Help!  (and thanks in advance for all advice!)

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  read this too

  http://www.FixYa.com/search/p465952-ibm_thinkpad_t43_pc_notebook/pxe_e61_media_test_failure_check_cable

• Recovery disk does not work now I have installed a new hard drive.

  I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick

  Hi, Nick:

  Unfortunately, I don't have any experience in troubleshooting these special software installations.

  We should expect to download and install.

  If they are not, I have no tricks up my sleeve for you to try.

  I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.

  See you soon,.

  Paul

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• HP S3120N. I replaced the motherboard and the power, now the recovery disks do not work.

  I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?

  Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.

  Frank

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• Vista recovery disks do not display TOSHIBA HDD Recovery option

  Back to school for 4 children with laptops is a pain, he seems to be constantly before wipe them and their establishment again.

  Any ideas why the Vista recovery disks do not display TOSHIBA HARD drive recovery option?

  I made a USB key and copied all the files from a backup of the Recvery drive to it. The USB displays the TOSHIBA HDD Recovery option but calls for the disks and will not run the recovery of the USB itself. It's annoying, but at least I can still use it to recover the machine.

  I would like to be

  the problem with discs

  or

  get the USB key to retrieve by using its own files instead of asking for the disks. Vista was not created with the option to recover from USB, so maybe I can't.

  HARD drive recovery option appears not in the advanced boot menu if something has been changed or modified on the HARD disk and the flag was removed.
  For example, this may be the case if the partition has been changed, modified or if HARD drive recovery files or folder has been changed, moved, or deleted.

  In case you want to recover the computer laptop back to factory settings, you must use the recovery disk

• Toshiba NB200-10z - creator.lnk recovery disk is not available

  Hello, I have a problem with my Toshiba NB200-10z netbook, when I run creator of recovery disk Toshiba with that I get the window:

  The unit or the network connection to which the link refers to "creator.lnk recovery disk is not available.
  Make sure that the disk is properly inserted or the network resource is available and try again

  How can I solve this problem?

  You want to create the recovery disk or recovery image stored on USB flash media?

• boot files are gone can be fixed recovery disk did not help

  It started with a closing inproper down, now, everything went recovery disk does not start even the computer

  You may need to change the boot order in the BIOS.

  How to configure the BIOS to boot from CD
  http://www.ehow.com/how_6588172_configure-BIOS-boot-CD.html

  Advice and warnings &
  Incorrect settings, the BIOS can prevent your computer from working properly. Do not change the BIOS settings if you are sure of what you are doing.

  Configure your BIOS to boot from CD
  http://www.Lockergnome.com/Windows/2005/12/21/configure-your-BIOS-to-boot-from-CD/
  Unfortunately there is not a set of measures to do this because the BIOS settings vary from one computer to the other. You will need to check your manual or documentation of the computer motherboard for accurate measurements, you need to complete to allow your computer to boot from CD.

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.