Impossible to update the firmware PC 6224
Hello
Firmware connect 6224 3.3.7.3 power.
I want to upgrade to 3.3.10.3; I followed the procedure to upgrade the picture tftp://my_tftp_serv/PC6200v3.3.10.3.stk
The copy is complete without error, but sh worm returns image1 and image2 the same (3.3.7.3).
I tried to go through the interface of http with the same result, no error but see anywhere the 3.3.10.3 version.
What's wrong?
Thank you to.
Kind regards.
Fred.
In the menu to boot when trying to choose option 8 to remove the image from backup and then attempt to update.
Tags: Dell Switches
Similar Questions
-
Impossible to update the firmware on HP laser jet 5200dtn
I'm trying to update the driver without result.
I tried to do it via the PC. Downloaded the update. Install the driver. Got the smiling face, restarted the printer and still older driver here. I even have the weird thing that when you install the update, the printer then starts printing dozens of pages with a line or two of random characters.
I also tried the side Mac also unsuccessfully. I'm on 10.6.
Any advice?
Hello
You might have more luck on the bussines forum, this is the forum of consumer and your unit is regarded as a bussiness unit, so bussiness forum could be a place where you get a better answer.
Find it with the link below. -
An error occurred during the update the firmware.
Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?
Thank you in advance for your help! ... soon a
If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.
-
An error occurred during the update the firmware. -16
I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16
I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.
I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.
I'm not sure what is the problem...
Your airport is now not working? That is, the reset did not work.
OR
It doesn't have to be upgraded after several attempts?
The airport is connected to the network as usual? You have full internet access through the airport?
What model is the most convenient airport?
The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.
What is the current firmware?
If it is a very old model, they can sometimes give wrong if it has never been updated.
-
How can I update the firmwar in the tv 48T5445DG?
Hallo,
According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
By TV now has:
Softwareaktualisierung V.3.6.0.b
SoftwareVersion V.3.3.6k
I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
It does not try to update on the Astra satellite.
I also tried on the portal page, but did not find any option to update the firmware.So my questions:
s ' Please explain step by step on how to upgrade the firmware
-What are the parameters of sat/transponder update by Sam currend?
-would be even better, if the update would be possible by download and USB
-It would also be good to know what has been fixed.Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.
Hallo,
According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
By TV now has:
Softwareaktualisierung V.3.6.0.b
SoftwareVersion V.3.3.6k
I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
It does not try to update on the Astra satellite.
I also tried on the portal page, but did not find any option to update the firmware.So my questions:
s ' Please explain step by step on how to upgrade the firmware
-What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
-would be even better, if the update would be possible by download and USB
-It would also be good to know what has been fixed.Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.
Thanks for your help
-
Problem with updating the firmware on 40TL838G
Hello
I am very happy owner of Toshiba 40TL838 screen (G).
Recently, I tried to update the firmware on it.
Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
Following the online instructions I have unplluged TV power.
Plugged in USB. Connected TV to the power and he lit. And nothing happened.After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.
Firmware: 6.1.0M.1
MBoot: 00480288
MFC: 240226Any ideas how to proceed with this case.
Concerning
SLimHello
The firmware can be downloaded and updated via the network.
But as far as I know you need to change the drive media or software update settings can not be started.
Media Player-> USB media player-> installation
Then press left or right, and select THE
Now we turn on the TV
Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
Then choose YES -
Update the firmware, Toshiba TL 838
I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?
> I have problems with my TL838.
What problems do you exactly with the LED Toshiba TL838 TV?
-
Gigashot K40HE - update the firmware on the SD card does not work
Hello
IBought a Gigashot K40HE 2 years and everything was good until he stopped keep the date in mind.
I had the assistance of Toshiba phone told me to update the firmware with the following procedure:
1. prepare a formatted, empty SD card.
2. Insert an SD card to the card reader. Copy the firmware file
(file name must be "psd.bin") in the SD card. Make sure that the new firmware file is copied to the SD card.
3. Insert the SD card into the DV.
4. Insert the battery in the DV.
5. Insert the adapter in the DV. (dual power supply)
{color: #ff0000} 6. press on "Power button" to power. Then the LCD displays 'FWUPDATE YES OR NO'. Select "YES".
and press 'OK '. The DV will update automatically the FW. {color}
7. after that the FW update completed. LCD display will show "OK". And then, will auto power off.Everything was good until 6... The DV starts as shown. It justs starts normally, asking me to set the date as every time I turn on my DV.
I tested with a SD card that usually work on other devices, so I guess that the card is not defective. It's a card SD transcend 1 GB 45 x. And I know that the card is seen by the DV, because it creates folders on it for recording photo or video.
Has anyone an idea to help me sort this out?
Best regards
OzhadesHello ozhades,
before you start an update of the firmware, it is very important the battery completely full.
After the battery is fully charged please do the fw update again.
Best regards
-
Satellite C670 - update the firmware on the CD-Rom drive
Hello!
I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
Please tell me where I can get the update.Features dvd / cd-rom:
DVD RW: TSSTcorp CDDVDW Ts-L633A TO01
Version: 6.1.7601.17514
class CD-ROM
Manufacturer: "Standard CD-ROM drives"
OS: Windows 7 64-bitPlease to help.
Greetings
You can update the firmware ONLY if the most recent version has been released for this drive.
There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htmBut for * TS-L633A * there is NO firmware update available.
-
Satellite Pro A200 (PSAE7): failed to update the firmware Vista
Hello
I tried tp update the firmware of my HD-DVD player with new firmware TO35 (SD-L802B), but it is not possible. The upgrade of this Winvup button is not selectable. I had the same problem with an older firmware, but I just thought that it was because the firmware is up-to-date (book is 1 month old).
Winvup shows my drive as "TOSHIBA DVGW/HD SD-L802B TO01 (26/10/07). The discription of To35 said, he needs a version of TO33 or T034, that is the problem?
I got this firmware update form [link firmware: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes & action = search & teddProduct = 737]
so, it should be the right one.So what can I do to upgrade my drive? Watching a HD DVD is not possible :(
THX,
HolgerIt is not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page deigned for the TS-L802A drive.
Do not mix these two discs! It is not the same thing!I found this site on the engraver of DVD Super-Multi SD-L802B
http://www.storage.Toshiba.EU/index.php?id=3&PID=221But according to this page, the firmware is not available for this driver (at this time? :|)
-
I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:
- With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
- I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
- It shows my printer in the Device Discovery list. I selected and clicked on continue.
- He thinks for a while, displaying "recovery information...". »
- After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."
Any suggestions?
You're welcome @justkwin.
Here is the utility of a Mac computer:
FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg
Kind regards
Shlomi
-
I updated the firmware of my as30v and now it does not work
It's my problem.
In my computer, the update was completed suceffully, but then my actioncam it does not work.
I removed the battery and nothing to do.
The screen is off and the rec light still works.
No information on the screen, no response. I tried to remove the time of one and an another battery. The red light is still in mode on. If I connect with the computer, nothing happened.Died?, but why!
Your device is in integrated security mode / download.
Go through the process of updating the firmware again. What operating system do you use?
Repeat and follow this guide:
http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=HDRAS30V&upd_id=9893&os_group_id=23
-
USRP RuntimeError: Please update the firmware and FPGA images for your device.
Hello
I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.
2009 LabVIEW and NOR-USRP 1.1
When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627
"niUSRP Devices.vi find
a length or configuration error has occurred."
Code: 1440
Details: RuntimeError:
Please update the firmware and FPGA images for your device.
See application for USRP2/N-Series notes for instructions.
Compatibility of the Protocol expected number [7-11], but received 12:
The version of the firmware is not compatible with the host code generation. »I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.
Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.
Can someone help me with this problem please?
With respect,
-Sigurd has.
Hello Sigurd,
The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.
You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.
This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP
-
EliteBook 725 G3: Failed to update the Firmware USB controller of Type C
My laptop is one of the first to come out of the Assembly line and came with firmware 1.02.
1.08 BIOS that is out there, so I tried to update Windows 7. It took time, but it's over and the tool said to restart. That's all he said I remember.
Upon restart, it started giving beep codes. I don't remember who it was, but it was something like 1 long 2 short or long 2 2 - short. He kept with him for awhile and I got sick of him, so I pushed on and held the power button for the kill and then restarted.
This time, he got in the BIOS, who says she has been updated controller firmware USB Type C of v12 v13. This FAILURE and gave me the option "restart and try again." I took that, but he was never retried.
I felt comfortable with that, so I flashed the BIOS 1.08 again, this time in the BIOS using a Flash DRIVE (\Hewlett-Packard\BIOS\New\N73_0108.bin). He went through much faster than on Windows, and in the end, he actually warned me that the machine may beep for awhile after restarting. Uh, thanks for the warning, now it's too late. Why doesn't Windows Update program gave me the same caveat useful?
In any case, the SystemRoot machine, but he did nothing to try to update the firmware of the controller USB Type-C. I'm guessing that he defined an indicator saying somewhere that we are already at 1.08, so there is nothing new to do.
When the BIOS Setup is emptied using BiosConfigUtility.exe, it shows the USB Type-C controller firmware to be even 00.12.
So, how to update at 00.13?
Posted March 31, 2016 1.11 BIOS update corrects this problem.
-
Update the firmware without success
Help!
I updated the Firmware of my CLJ2840 all in one and the device is now insensitive:
Device: HP CLJ 2840
Installation: network printer
OS: Win 7
Drivers: Installation of the Standard Win 7 drivers
I downloaded the file 2800_Series_FW_Update - 20120307.exe on the HP support site.
I followed the instructions to the letter.
I waited for the installation of the firmware to complete in its entirety
I have noticed the messages shown on the device LED panel that followed the procedure.
I noticed the face smiling at the end of the installation on the computer
Result:
Feature cycles as follows:
1 turn on
Toner of cycle 2 drums as usual
3 LED panel shows marks in the upper part
4 LED flashes once and 3 LED bars begin to scroll from right to left...
5 witness bright and alert light stay lit
6 this continues for about a minute... then the cycles of line 3... over and over again
The device is no longer visible on the network
HOWEVER
Even invisible on the network, I managed to run the program from firmware to success... a second time.
Help, please!
Our office is stuck without this printer.
Thank you
Hey Rota, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.
You can find the Board Commercial LaserJet here:
Business - LaserJet HP Support Forum
Take care!
Sean
Maybe you are looking for
-
How can I get rid of the Android download invitation screen whenever I load Firefox
My homepage is Google.com , but every time I load Firefox, Mozilla starts another tab and asks me if I want to download the latest Android. I can't seem to get rid of this screen and I have not all android devices
-
Satellite A200 - gel sometimes
I have a Satellite A200, purchased Nov 2007. Comes with Vista Home Premium installed. About 2 weeks ago it started to "freeze" or lock up. The hard drive access light went out, and the screen showed the last picture. Nothing has worked. No response f
-
Why this software has stopped working?
I think microsoft knows why we can no longer use this soft ware... but, of course, they do not want to help us... Well, for this reason, I am very angry with them and I'll look elsewhere for new software... I liked this program and I will not fail to
-
Computer error is not supported when you download the Fix It for Windows XP Professional tool
Hello I write a question on behalf of a client. The client tries to download the Fix It tool: http://support.microsoft.com/mats/hardware_device_problems/ for its hardware problem Windows XP when it has encountered an error that the store does not app
-
I deleted the links to Documents and photos on my start page.
I deleted the links to Documents and photos on my start page. Link names are still there, but they are going nowhere. How is it possible to recreeate the new links that are actually going to My Documents and pictures? I also cleaned my basket so that