Impossible Windows 7 computer upstairs to connect to a new router that I just installed. It worked fine before.

Similar Questions

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Unable to connect to my new router cable, my XP and Windows 7 machines

  Vista, wireless router Netgear, no link, please help

  No matter what I try, I can't connect to my new router cable, my XP and Windows 7 machines work fine but the Vista laptop are it. Have searched the web, looked at this site and the forums, but nothing does not jump and helps me solve the problem. I use a HP Pavilion DV9000 laptop, all service packs updates and so forth... any ideas?

  I suggest that you contact your ISP and get their help in setting up the Vista machine so it connects properly.  They know the right settings for the access provider, while we do not have and that there may be something else you need to do with Vista which is different of the other two systems (and hopefullly the ISP will also know and be able to talk you through the process).  I call my ISP all the time and they are VERY useful and have ALWAYS resolved any problems, I called (even if sometimes he had a visit from a technician).

  If the ISP Can ' t/don't/can't help you, then after coming back here and we'll try to go through it step by step, even if we cannot have all the information we need.  But I am sure that they will be able to help you more quickly and more effectively and with greater chances of success.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• upgrade to windows 10 and unable to connect to the Netgear router

  After the upgrade to Windows 10, I get a connection limited to the router.  I have tried everything that seems to indicate that I have seen but not solution.  I went back to 8.1 and everything is ok.  Drivers are all to date I can say.  The problem seems to be related to the default gateway or the lack of it.  It is not good to reset the router.  My labtop HP running windows 8.1 works fine but my Dell Inspiron gets only limited access to the router. I need help to solve the end.

  keybaud

  I do not have a Dell, but I'm having a similar problem with the Netgear WNDR4500 v1 router and an ethernet Intel I217-V adapter. 10 Windows does not recognize the router is via the Ethernet connection, but it does not work with a wifi dongle.

  This is to help, adding that I don't expect Dell to solve my problem. :-)

  Hello

  Not sure what help I can give since I know not what system you have, and if it is considered compatible Win10, but here is the link to the driver Windows 10 ethernet Intel 1217 - V cards.  ((NOTE: le lien que je fournis est pour la version 64 bits de Windows 10.))  If you have installed the 32-bit version and then to just change the drop-down list of BONE near the top of this page))

  I would also say that updating the firmware on this router would be your next step.  See if one or both of the Exchange help people.

  If this isn't the case, then remove all your system's ethernet drivers, reboot and see if Windows 10 has all the innate drivers that may work.  Or else let Windows Update search and download a driver.  Who has the strongest chance of finding a compatible driver.

  I hope this helps.

  Todd

• My computer says my windows is not authintic but I know that this is what is wrong. I have on my another desktop and it works find but not on my labtop. It was working fine before.

  My computer says my windows is not authintic but I know that this is what is wrong.  I have on my another desktop and it works find but not on my labtop.  It was working fine before.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• my windows xp computer started and gave me a new identity. all my files are missing. Is it possible to recover them? The programs are still on the system.

  The computer worked fine last night.  This morning, after entering the password journal, xp started up the generic wallpaper and invited me to learn the features of windows xp.  the programs seem to work.

  Looks like your user profile is damaged.  I hope that you do not use the built-in account named "Administrator".

  If the administrator account is not corrupted, it is available in XP Home restarting the computer in Mode safe.  In XP Pro, you can get on behalf of administrator mode without failure or by pressing CTRL-ALT-DEL twice at the 'Welcome' screen.

  Assuming that you can get an account with administrator privileges, administrator or another account that you have created and which has administrator privileges, see http://support.microsoft.com/kb/811151

• WRT54GS - no internet connection is detected and yet my computer cable to connect to internet through router

  I had my router for a little over a year. I am connected to a wild blue satellite modem. He has worked without problem for a year.  Now, he claims not to detect an internet connection, even if the computer connected to the router has no problem connecting to the internet. I just can't connect wireless to the internet because the router thinks that there is no internet connection. I have reset several times, turned on and off the power to the modem, followed all the troubleshooting instructions. All the lights on the modem and the router. I need to replace the router, or I would encounter the same problems with a new?

  If you use the update 1.6 LELA LELA 3.0 and your problem will be solved.

• Unable to connect TV to new router

  KDL-46HX820. In the process of setting up the TV, I properly connected by Wi - Fi on my router Linksys Valet Wi - Fi. Later, I replaced this router with a Linksys E4200. The Linksys router has generated its own network ID and password. I tried to connect the TV to the new wireless router using the WPS process, but the TV will not connect.

  What should I do to get the TV to connect to a new wireless router with a new network ID and password?

  Thanks for any help.

  Try to assign a static IP address for your TV. First of all, you need to find the address of the gateway of your wireless device. In a computer that is connected to your wireless network, you can open a command prompt window (start - run - cmd) and type ipconfig. This will give you the address of the gateway (for ex: 178.152.1.1)

  Then go to the TV and go through the configuration of the network (wireless).
  When you configure IP address and proxy, choose (custom instead of Auto).

  Then proceed as follows:
  IP address: 178.152.1.15
  Address of subnet 255.255.255.0
  Default gateway 178.152.1.1
  Primary DNS 8.8.8.8
  Secondary DNS 4.2.2.2

  Note that the IP address and default gateway is the same as your gateway address you got from the computer except the last figure of the IP address.

  Then browse the rest of the setp upwards and who need to connect to your wireless router

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• I tried to install Health Vault Connection, but my laptop says that the program has stopped working

  I tried to install Health Vault Connection. My computer, an HP laptop, tells me that the program has stopped working. It works on Windows XP and Windows 7 PC. I recently discovered that it will not work in DOS. How to get this running and how to uninstall BACK so that this program will be executed. Will affect the functioning of the laptop?

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  There are no BACKS to win and has not been for some time, so I don't know where you got this information.

  Clean boot the PC, then reinstall HealthVault

  http://www.Microsoft.com/en-us/HealthVault/tools-devices/devices.aspx

  (Remove compatibility options that you maybe solved everything first)

• upggrading a windows xp pro service pack 3 with the new card mother and pure install using the original disk of xp with service pack 2

  I have an auto build Windows XP pro with service pack 3 that is upwards and I feel the need to upgrade to a new motherboard and processor causes memory and I know that when I do a clean install with my original disk, I lose service pack 3 that will then lose me the Microsoft support is anyway that I can backup service pack 3 for use with what will be considered a brand new computer

  See you soon

  The site is authentic.  You have two options when you do your relocation:

  Method 1

  1. Download SP3 form the Microsoft site and burn it to a cd or copy it to a flash drive.
  2. Reinstall Windows with your original Windows XP CD.
  3. Use the copy of SP3 that you burned on the CD or copied to the flash drive and update the machine to SP3.  Note that if you have an original CD of 'gold' of Windows XP without service pack that you install SP1a or SP2 before you install SP3, SP2 is available here , download and save it with SP3 before making your relocation.

  Method 2

  1. Download SP3 from the Microsoft site and it wake to your Windows XP CD.
  2. Install Windows XP with your slipstreamed CD and your installation will be in SP3, when installation is complete you will not need to install service packs, you'll just have to do some other updates that have been released after SP3.

  The http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd is legitimate, it only gives you instructions on how to create and burn a CD of SP3 slipstreamed Windows XP.  If this seems too daunting then use method 1 to install Windows.

  Both methods are very good but method 2 allows a nicer cleaner installation, everything is installed to SP3 level and there are no remnants of previous service packs.  While creating the slipstreamed CD may appear to be a time consuming task, in the end, it will be a time saver and afterwards if you ever have problems with the installation of Windows you may need this cd SP3 slipstreamed to all repairs on the installation.  You can create the SP3 cd now and do it ready and at hand for future needs.

  John