WRT54GS - no internet connection is detected and yet my computer cable to connect to internet through router

Similar Questions

• Is there a driver for webcam to youcam 3 because mine is not detected and yet it's built in webcam

  Is there a driver for webcam to youcam 3 because mine is not detected and yet it's built in webcam. How is it fixed?

  See the answer to the Q even posted by you on the 21

• Unable to connect to Internet through router WRT400N.

  I was able to connect to the Internet via the wireless, but not today it stopped working (without computers can connect if not just my wireless). I am able to connect to the Wireless router and update the parameters, I am able to connect to the wired router and change the settings. I am able to connect to the Internet by plugging directly into the modem and using this same cable I plug it into the router and then no internet. I don't know what to do anymore as I power cycled many times. Any help will be great. Also - all lights seem to be lighting up as usual.

  Who is your Internet service provider?

  You can access the Internet when you connect the computer directly to the modem. This means that the modem works fine.

  Connect the modem to the Internet port and the computer on the Ethernet port on the router.

  Open the router configuration page and check the settings of the router's Internet connection.

  Follow this link to configure the router with cable Internet service.

  Follow this link to configure the router with DSL Internet service.

• I forgot the password to my old computer admin, and he has 1 account to it. What can I do to cross it and unlock my computer without drop kick to it through my 3rd floor balcony window lmao.

  Although even I have now a new computer, still I'd like having my old 1 as a back-up if this 1 crashes ever, there is only 1 account on it and I forgot the password of admin for it. I tried to restart it in safe mode if all goes well to bypass the password admin start-up section, but surprise! always had a password and when I type the password reset link under the password box that he told me that I need a password reset disk where can I get 1 of them and I can get very cheap 1 because I am disabled and cannot work more:(si im limité sur combien dépenser chaque mois.) It also requires a USB and not a disc, the brand and the model is an Acer Aspire 5610 with windows vista home premium.

  Hello DOWG pepper,.

  Unfortunately Microsoft forbids us to give instructions on how to work around/hack admin password. There are ways, but we are not allowed to disclose. As this is an old PC, maybe the best thing for you to do is re - install windows on this computer.

  On the reset disk, you will need to create one of these yourself by opening the control panel and clcikcing on user account icon. In user accounts, look to the left of the window and you will see a list of tasks. The first is create a reset disk.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Request for Pin wireless connecting to a linksys router

  I want to heck the feature in windows vista that asking to enter a PIN instead of simply asking for my shared key of wireless wpa. Can someone tell me please how to disable this feature in windows vista.

  The possibility of using a PIN instead of a password for wireless is on the router, not the computer . Go to the Linksys configuration utility and disable the PIN requirement wireless has from there. This is general information about implementing a secure wireless network, which includes how to enter the configuration of the Linksys utility.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Excellent guide for setting up of a wireless network, with images -http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• I can't open Photoshop or CC.  Error says I need to connect to the internet, and yet I am connected

  I'm not able to open PS CC.  I get a message that I need to connect to the internet, and yet I am connected.

  Hello johns,

  See the links below:

  Solve common problems of activation and deactivation of creative cloud.

  Internet connection with creative cloud problem

• I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.

  I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
  Any suggestions or solutions to this problem?

  Thank you
  Chuck

  Hi Chuck

  Your question is addressed in the Microsoft Answers forums.

  Please ask your question in the following forum.

  Small Business Server Forum:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Concerning

• When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks.

  When asked "do you want to enable Network Service list? I continue to by clicking on the button "Activate this", and yet I am not able to see the activities or connections to all networks. My internet works fine, I just can't see if I am connected or not. Help?

  original title: list of Network Service does not illuminate

  Hi SikDude,

  Please use the Forum of the community for Vista.

  Opening of services by typing services.msc in the search bar and find the list of Network Service. Under properties, set it to automatic.

  Please let us know if we can do something else.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Helps detect and block repeated RDP has no connections

  I wonder if anyone has found a way to detect (and then effectivly block) repeated failed RDP tries to connect.  I guess it's difficult because they are legitimate connection attempts that we don't normally block.  Run us several terminal servers and (correlated with new RDP according to virus recently announced) that we have seen of many attmepts login failed via RDP over the past months.

  I found a similar question that did not have a clear answer.  Anyone know how to set up a detection of flooding for repeated RDP connections?

  https://supportforums.Cisco.com/message/3365703#3365703

  I would like to find a way to block repeated attempts, but not to block all attempts, I need to keep the other source IPs unblocked the blocking mechanism.

  Erick

  You can try a signature of engine aotmic IP which is on port 3389. You can set the County event to the aggressor and the victim address pair and event the number to a decent amount (say 5) and a count interval to an appropriate interval event (say 30 seconds).

  You can also match on additional details (like a RST flag as well in the header of theTCP which ideally should follow a connection attempt has failed). If you do this, you specify the source TCP 3389 port and also activate swap victim-perpetrator addresses so that the destination IP address is detected as an aggressor.

  You can then set the action to "refuse the perpetrator victim pair inline" and all the traffic between these 2 guys will be blocked for a period of time (the default is 30 miniutes if I remember correct).

  Indeed, the signature will try to match 5 TCP packets in 30 seconds with a source port of 3389 and between the same set of IP addresses. If this condition is, it stops all traffic between these 2 hosts for a set period of time.

  Yet once, the numbers I mentioned above may not meet your requirement. You should maybe start wireshark and see the boss and match accordingly.

  I hope this helps!

  Kind regards

  Assia

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• Router WRT54G does not connect to the internet during the passage of the modem cable to fios buildings

  I recently had need save money and cut off my cable service. Fortunately my building has a service that they lead in all apartments. It's just an ethernet wire that runs into my apt... (I pay for it with my mainentance). The router linksys has worked with the cable modem, but as soon as I plug the service buildings (i.e. Fios) it doesn't let me go on the internet. If I hang the service buildings until dirrectly on my Vista PC or Mac OS 10, it works fine but as soon as I set up the router I get an unable to connect to the internet message on Firefox, IE and Safari.    Ive updated the ware closes on it and Ive reset router noumerous times. IM at a loss.   Would appreciate any help.

  Probably, you will need to reconfigure your modem. Here is the procedure.

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

  I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

  Hi Kelly,

  Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

  Activating the license on any other machine, please select the option to disconnect all other devices and try again.

  Reference: connect and disconnect activate Cloud Creative applications (deactivated)

  Kind regards

  Sheena

• Cannot install applications through Microsoft store in Windows 8 Pro: using the internet through the proxy: detected 'No. Internet Connection' Error statement

  I study in a University, and we have access to the internet through the proxy. We just need to put in the proxy port: in the settings of internet explore and authentication additional etc. is not necessary to access the internet. Everything else is working well, including windows update and even browse apps in the store of Ms. But I'm unable to install any application. Help, please.

  In fact here in ITI, all our internet traffic is routed through a proxy (to stop the torrent, filter things etc.). To remove the proxy is not an option.

  I solved the problem by using the following commands as an administrator:
  netsh
  WinHTTP
  import proxy IE