Black vertical lines through copies self-powered

Similar Questions

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• All-in-one HP Office Pro 8610: black vertical line on the scans

  I have a black vertical line down my scans and copies that are feeding by automatic feeding (8610 Office Pro HP all in one)

  As I read a few issues on the forum, I could solve this problem by opening the top loader and wipe the glass with a "lens Wipe" wipe Strip

• DeskJet 3835: Black vertical lines when scanning - Deskjet 3835

  Hello

  Whenever I scan using the document feeder, there are black vertical lines showing on the picture. This happens with the dish however. The printer is the 3835 Deskjet all in one set. Receive your answer. Thank you.

  The lines that you describe would generally caused by a small file specifications (or some spec) on the thin glass to the left of the bed main scanner.  Open the scanner cover and clean the thin glass.  It can help to shine a bright light which is held at a slight angle to the bed of the front.  This would be to highlight the areas to be cleaned.

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• LJ Pro M1536 vertical line on copies of the ADF

  Vertical line appears on copies by the ADF, but not on the copies placed on the glass.  Product purchased less than 30 days ago if cleaning is not a problem, although I go through the cleaning cartridge, verification and re-configuration of the process.

  Hello and thank you for your answer update!

  I am very pleased that this issue is resolved. Please click on 'Accept as Solution' on this post to help others find the solution!

  Have a great day!

• Smart photo printer all-in-one 7510 vertical lines on copies

  When I have the paper source in the feeder to copy, copies made will have a vertical line to the bottom of the page.  When I scan to make a copy, copies do not have lines. Any suggestions?

  There are a few things I would check if the Photosmart 7510 produces a line in scans/copies.

  (1) hard Reset of the printer

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug the unit back to

  (2) make sure that the unit is plugged into a direct socket that the printer has built in the surge protector.

  (3) clean the glass flat on the printer to make sure there is no debris on the glass and the line.  For example, if the line appears with copies/scans from the ADF, then make sure to clean the small strip of glass used by the ADF found to the left of the main window.

  Also, take a look at the steps in the document found here.  The document covers troubleshooting when the printer product lines/stripes in copies/scans.  Let me know how it goes.

• Canon XA10. Images MTS has a black vertical line

  When I import a Canon XA10 film and place it on the timeline, I get a thick black and think that the white vertical line at the last second of each clip.

  

  If I find the footage imported with another video program I don't see these lines.

  Any ideas?

  Thank you.

  This has nothing to do with your camera.

  She a new feature added to CC to indicate that it is the last image.

• HP Officejet 4632 All in One – scanning with a vertical line through the document.

  Just bought the machine less than a month ago.  Faxes and prints fine and until last week was the sweep for our laptops beautifully... but now is scanning with a dark vertical line up and down the sheet about 1/3 in the document.  What is the cause and how can I "fix" it?

  Any suggestions?

  Thank you

  Hi Rohi63.

  I understand that you have a 4632 Officejet which becomes a vertical line what it is scanned. I'm sorry to hear that, but I'll do my best to help you.

  This seems not only to be the case when using the automatic document feeder, or the glass flat?

  Usually something like this is caused because there is something on the glass. If it only happens when you use the scanner, please get a lint cloth and some glass cleaner (Windex or water if nothing else is available) and wipe the entire surface of the glass for scanning. If this only happens when scanning via the charger, you will see there is a separate strip of glass on the left looking at the scan glass, and you can focus your cleaning there.

  If this does not resolve the issue please try the steps in cleaning several times, but if nothing seems to evolve, please make sure that the printer is connected directly to a wall outlet so that we know, that he has all the power it needs.

  Hope this helps, have a nice day!

• HP Photosmart C309a all-in-one feeder automatic of leaves vertical lines on copies?

  I can copy using the flat bed of glass, but when I use the automatic document feeder, a series of vertical line appear on one side of all pages.

  This has always been and is frustrating and annoying

  can anyone help please.

  MazzaG

  Hi Mazzag, you are welcome.

  Out of my experience, vertical lines may appear when you use the ADF are the result of any kind of dirt accumulated on the ADF scanner glass.

  For some reason that I missed that part, that affect most of our question

  1. Raise the ADF mechanism.

• Black vertical line on screen

  My Dell laptop has a black vertical band that is approximately 1 inch wide that appears and then disappears near the area of the Start button.  It goes off the left side of the screen.

  Please notify.

  Connect an external monitor - if the fault does not show, it's the Billboard that is bad - you will need a new.

  If it appears to the outside, you have a bad video chip or card - replace the card mother or video card, depending on your system has.

• ENVY 100 - black vertical line appears on printed copies

  Printer: HP Envy 100 all-in-One D410a e; Mac OSX 10.7.5; no error message; don't remember to make changes before the problem first occurred it is possible to I accepted & installed a HP by HP upgrade offerred.

  Question: How can I get rid of a 3/4 "black line portrait that appears on all copies made using the top scanner glass to make copies?

  I'm sorry that you are having this problem with the printer. Here a link to a document that solves the problem you are having with the printer. It will give troubleshooting steps to try to try to repair this printer output when making copies. I hope this helps.

  If you reach the end of the document and the issue is not fixed. Sought to be the replacement of the product.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• LaserJet Pro 8600: Laserjet Pro 8600 Plus vertical line on copies put through food

  I read all the messages.  Seems to be a common problem.  I did cleaning and rebooting and it is now plugged directly into a wall outlet.  Still have this line.  Plan to unplug all night and give it one more try tomorrow.  If this does not work, I guess I have to try the factory reset if you could send it to me.  VERY frustrating!

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

  Figure: Clean the ADF scanner glass Strip

• OfficeJet pro 8600 more: 2 black vertical line when scanning only

  I get 2 vertical black lines while scanning using the ADF. This does NOT happen when you use flat bed scanning. Also, this does not happen with copies in the ADF or flat bed - scan only using the car power.

  Not an expert on your device, but if you look on the side of the adf, where the paper feeds, you open the lid to the scanner glass is displayed.  Now on the left side is where the adf feed above to scan paper is on the side left where there will be some dirt or material causing lines.  Usually, you can take the copy that came out and line up so you can see the dots making line.  Sometimes, you need to use your nails to kind of scratch material out of the glass.  I usually rub really hard with some windex first, and if that does not work, I line up the and scrape the residue out of the glass.  Again, it will be on the left side of the window in an inch on the left side.