improve WiFi reception?

Similar Questions

• Does anyone else have bad WiFi reception on 15 mid-2012 "MBP with screen high resolution?"

  Tried a new card from the airport, no difference. The WiFi reception is half, at best, of any other Mac. Get my wife of twice the reception of mid-2010. Like the hundreds of other Apple devices I have my mini iPhone and iPad Pro service.

  Is there something on the antennas in this screen? It's in this way that I bought it. Madding simply as a tech. At least I know if my laptop can connect to WiFi, just about anything can.

  I7 2.7 mid-2012 with 1 GB of VRAM and view high resolution.

  Hold down the Option key while you click on the wireless icon in the menu bar. This will display a number of important parameters on the performance of a Wi - Fi connection. a little, it will look like this:

  

  What values show you for Mode PHY and channel?

  What CISOS or the signal strength? How far from your router when you measure this?

  What tx rate or rate of transmit?

  very important and how many other networks do you see listed?

• Less Wifi reception after replacing the screen

  Hi, can someone tell me what might be wrong. After that I fell on my phone, I had replaced (RESTful) screen. Everything works fine, but the Wifi reception is worse then before. Contact RF cable problem? Or a smart Wifi (if aboard all) is able to do this?

  Anything else?

  Thank you!

  Hi @alfred52,

  It is difficult for us to determine what could be the reason for this, unless you get your phone looked to one of our authorized service center as uliwooly suggested.

• Low wifi reception on CQ10-400 ca Windows 7

  I find that I have low WIFI reception on a ca CQ10-400 running Windows 7.  Using InSSIDer 2.1 I receive signals amplitude of 65-70 to a runnng away from WIFI AP 10 ft @ 175mw.  I have a HP Elitebook 2530p just next to get signals from 20-30 dB, the power settings are set to maximum.  I removed the checkmark on the power on the parameters according to the recommendation of compaq.  I tried the old drivers and the new.  RALink 3.0.13.0 and 3.2.1.0.  Does anyone know if this is normal for this model?

  I solved it.  Having considered very carefully the maintenance manual, I noticed that black and white antenna drivers have been reversed.  A reversal of the cables solved the problem and he now gets a signal as strongly as any of my laptops.  http://h10032.www1.HP.com/CTG/manual/c02481106.PDF  Thanks to Compaq manuals.

• WiFi reception bad blackBerry Smartphones?

  Hello - I just my BB for Christmas and so far I like it... but I have a little problem with WiFi call is received.

  Unfortunately, my house is a black hole and I can't receive the regular reception on my career in the House. I have to connect VIA WiFi, which was fine with other phones - crystal clear and good reception to my router.

  Now, with my Curve 8900, I can connect to great WiFi - no problem there... I can use the data and receive emails etc is no problem. My problem is - during a phone conversation on the WiFi, my reception is horrible. I can be standing right next to the router, and the phone cut in and out, is irritated and everything just horrible. Regular calls in my carrier without WiFi are great.

  Is that a setting some part I have not found? I don't understand why the WiFi I can properly connect, send and receive data very well... but my calls are horrible.

  Any ideas or help would be greatly appreciated!
  See you soon!

  Sorry... I forgot that I should add in my login details...

  I use a Linksys router

  Security: WPA-Personal (it is protected by)

  Signal strength:-45 dBm

  Channel: 6

  Network type: 802. 11 b / g

  Hi coco,.

  Thanks for the reply!

  I tried what you said - but it has not yet make any difference. Finally I had to call my service provider and she said that I had to turn on the setting QOS on my router. Everything seems to be fine now - so I guess that's it!

  Cheers and thanks again!

• Want dv7 wifi reception

  Hi I'm a dv7 Notebook and I noticed that my wifi signal tends to be weak and more irratic I expect. Other mobile home have a stronger and more stable signal from the same locations.  This problem seems to be different from similar posts I've seen.

  Windows 8

  BIOS F.28 - 25/07/2013

  HI aslara1:

  I understand that you are having problems with your wifi connection. I have included a link to your below wireless network troubleshooting.

  http://goo.GL/V48Q76

  I hope it's useful. If you need help please reply back.

• Satellite P755-11 q - bad WiFi reception

  Hello.

  I have a new satellite p755, with W7 64-bit.
  I admit for almost a month now, after 4 years of use of a satellite A500 18 Q. my old laptop still works and here begins the problem.

  We have a connaction wireless at home. my old computer so the computer of my brother have a full reception at most of the places in the House.

  my new computer has half a rece [option at best, a room away from the router, and if I go further, I can't get a connection to all pilots are the latest in existence and I'm at the end of my intelligence.]

  Is the network card of lower quality than that of the old A50? What could be the problem and how can I solve it?

  the map, as far as I know, is an Atheros AR9002WB-1NG wireless network adapter.

  In addition, when the computer returns from hybernation, (using system continue) it works really slow, and it takes nearly 10 minutes to all open the wondows work too much in fact.

  I bought no new computer to get a better user experience, as my old computer is "tired" and ready to retire. but so far, it's mainly a source of frustration.

  Help, please.
  Thank you.

  > Is the network of lower quality than that of the old A50 map? What could be the problem and how can I solve it?

  Don t think that the quality is poor there are different cards on the market and each chip wireless network support different features

  In your case, I would try to change the standard 802.1 B or G

  Try to also change the channel
  As far as I know that this may be in the Device Manager-> Wlan card-> properties-> tab advantage

  Also disable power save for the wireless network adapter

• Poor quality of GPS and WiFi reception, iPhone 6

  I can't use applications that use GPS, maps, waze.

  My iPhone cannot connect to wifi which are more than 10 meters.

  I restored network settings did not work.

  I restored to factory settings, none worked.

  This phone was purchased in October to November 2014 2015 has worked well

  What should I do to fix this?

  IPhone 6, iOS 9.2

  I'm having the same problem. Same phone, same age of phone.same symptoms.

• Much worse compared with Z3C WiFi reception

  I had to spend to Z5C and usually it's good. Only difference I see is that wifi networks, I used until now have much worse signal! Is it because the Z5 reduce the sensitivity of the antenna or because the recent Marshmallow updated?

  Dude, I feel, honestly! I own a Z5C and my brother has the regular Z5 and see the difference in performance of WIFI coverage between these two, I feel a little disappointed. However, I think it's a hardware problem rather than a software problem. You see, Z5 uses antenna MIMO 2 x 2 design where Z5C uses 1 x 1 SISO arrangement. Where the Z5 MIMO comes into play in terms of bandwidth, to be able to establish connections to 867 Mbps Z5C can connect up to 433 Mbps. And some sources suggest that 2 x 2 often gives you a better coverage than 1 x 1 (Please someone correct me if I'm wrong, I'm no expert, I'm just saying what I had read earlier) layout of antenna. That said, I do not own a Z3C, nor have someone around that there I can't compare. However, after having updated from an old phone (Galaxy Note 2) with a design still 1 x 1, I expect WIFI coverage to be much better on this phone flagship of 2015 as it was on a 2012 flagship phone. Maybe tweaks software in future releases can help fix it...

• BlackBerry smartphones no wifi reception

  Hi, I just got a Torch 9800 used. When I turn on the wifi, there's no signal one of my local networks. Here at work I should be able to pick up at least 2 networks, but it isn't everything.

  I'm not under a data plan on my BB. My old phones (pre & iphone) I just use wifi for my mails and surf plan with no data. Does make a difference with a BB?

  Thank you

  Ah! Yes, it's important. What I had first suspected, is that your BB doesn't have the Service books required to enable the WiFi feature... but, with this result, it is not the case. Therefore, what can be assumed is a hardware problem, which no amount of effort can overcome. Only a technician with the BB in their hands can make a proper diagnosis. If you stay under warranty, you're looking for that take charge of your place of origin of the purchase, your mobile service provider or your authorized service center - it varies by region, but you should have received the documentation, purchase, explaining your warranty rights and methods.

  Good luck!

• How can I improve my reception of bluetooth from my MacBook pro? Permanent cuts in and out.

  Bluetooth keeps cutting in and out

  You will need to provide more information (distance, other factors).

  Barry

• Reception improve blackBerry Smartphones

  Hi all.  I'm new on this forum, so my apologies if this has already been discussed above.  Recently, I moved into a basement apartment and have problems with reception - too specific, I guess.  Someone knows a way to improve the reception on a Blackberry "BOLD" to get a better reception quality in such a situation?  Thank you

  For the purpose of surfing, using a signal from your home router WiFi is an option.  Not all carriers allow component Wi - Fi, this might not work with your vocation.

  As for strengthen the signal of your cell phone, it's just a reality that does not move the signals of cell tower well below ground.  There's really nothing you can do about it.

  I hope that helps you.

• Worst reception WiFi iPad Pro

  Has anyone else noticed that the wifi reception is lower than with the new iPad Pros? Mine is worse in some parts of my house than my previous iPad Air. Or is my new iPad Pro (small) does not work well?

  Hello there jimpal!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with the Wi - Fi signal on your iPad Pro. I know how it is important the Wi - Fi signal is strong when it is connected to the iPad pro. Read this article with information on the potential sources of Wi-Fi and Bluetooth. Looks like your iPad might be better served by following these steps and tips to see if it helps you with the connection.

  See you soon!

• I get my internet through a Repeater.  There is a POE carrier then online, then a router adapter yet.   Can I use an Airport Extreme with POE to improve my WiFi range?

  I live in Baja California Surinamese no cable.  You want to improve WiFi.  Not sure how to interact with a POE.  Tried to set up the airport without a bit of luck.  Appreciate some feedback.

  If the connection between the POE (Power over Ethernet) device and the AirPort Extreme is a wireless, then you will not be able to extend the network Wi - Fi of the OCB in the extreme. This is possible with an another AirPort base station.

  In addition, only a particular model of the base station AirPort Extreme POE supported wired connections. It was discontinued in 2007 and is model # A1034.

• Pavilion p6610f Desktop: software blocking Wifi transmission

  Pavilion p6610f Desktop 64 bit Win 7 Home Premium SP1.  I had problems with the buffering and freezing in my browsing on the internet. I contacted my Internet provider after doing all the clean to the top of my computer that I knew how to do. After an hour or two with the agent to remote access to my computer and them telling me that everything was going well at their end, I asked why the icon Wifi in my taskbar shows only two bars on a possible 5 when my computer is right next to my Wifi modem? I was told it was probably a software interfering with the Wifi transmission.  I ran Microsoft malware and adware programs removal & Ms. Mr. Fixit.  I have MS Security Essentials and have not all problem reports.  My provider Internet telling me the truth?  Is the lack of Wifi reception with software that I can't find? I looked in my programs & features and does not see all unauthorized programs may have snuck in and I deleted some. The only thing that is new is a HP Envy 5660 all-in-one that is set up wireless.  It has been suggested that I have reformat my hard drive and reinstall the essential programs to see if that helps. But, acckkKKK!  I don't want to go through all that again! I did twice before and have installed two others had readers since I've owned this computer and don't want to if not necessary!  I thank in advance for your time and your knowledge if you decide to advise me.

  Hi there @TY965

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are getting a signal strength wireless low, despite the close proximity. I'm happy to help you with this.

  In some respects, being too close could be part of the problem. Because of the arrangement of the devices, it could be that the receiver on your desktop does not receive a clear signal, due to the metal in its framework. I suggest moving the router wireless in the location and see if you can get a better signal. This page has also some other useful information which may affect the strength of the signal.

  How to get a better Wireless Signal and reduce interference of wireless network - howtogeek.com

  If that does not help or make a difference, then you can try looking at your system itself. Start with the next page, and if there is no improvement, wok your way through the other sections, I have included, until it is resolved.

  Troubleshooting your wireless network and Internet access (Windows 7)

  Focus on the management of feeding your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  I hope that this help and if anything here solved your problem, please mark this message as a solution.